| Content | This Combo Includes:
Traxxas Stampede 4X4 Brushless Truck
EZ-Peak ID LiPo Charger
7.4V 2S 5800mAh LiPo Battery
This is the Traxxas Stampede 4X4 Brushless Ready-to-Run Waterproof Radio Controlled Monster Truck 2S Lipo Combo with 5800mAh 2S LiPo, EZ-Peak ID Charger, with clipless body, extended chassis, Extreme Heavy Duty Upgrade Kit, BL-2s Brushless power system and the TQ 2.4GHz Radio System (Traxxas Bluetooth Link Module Compatible - Module sold separately).
Stampede 4X4 Brushless
Bigger and Stronger Then Ever!
Stampede 4X4 is bigger and badder than ever with a new clipless body, extended chassis, and huge 5.3″ Sledgehammer tires for an aggressive monster truck stance. Stampede’s all-new BL-2s brushless power system delivers effortless power for all-day fun with an added boost of torque for terrain-shredding burnouts and powerful acceleration. Stampede 4X4 also comes standard with Traxxas’ Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability.
NEW BL-2S BRUSHLESS POWER SYSTEM
Stampede 4X4’s BL-2s brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Stampede 4X4 to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 kV is long-lasting and requires virtually no maintenance.
EXTREME HEAVY DUTY UPGRADE KIT
Stampede 4X4’s pre-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.
CLIPLESS BODY MOUNTING
Stampede 4X4 now uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. A rugged internal cage attaches to the body with molded reinforcements to prevent pull-through damage. Tough roof and tailgate skids protect the body in the event of a rollover.
Features
- BL-2s Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan (#3340)
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
- LiPo battery packs: 2 cells (7.4 volts)
- 3300 kV Brushless Motor
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 kV
- TQ 2.4 GHz Transmitter
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- Extreme Heavy-Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Extreme heavy-duty driveshafts
- Oversize diameter
- 6mm axles
- Steel wheel hexes
- Clipless ProGraphix Body
- Tough reinforced bumpers
- Reinforced inner cage
- Rugged roof rollover protector
- Tailgate protector
- Holds tight for intense action
- Quick and easy removal
- Chassis
- Modular composite tub design
- Secure battery hold-down latch
- High angle bumpers
- Suspension
- HD-composite suspension arms
- Oil-filled Ultra Shocks
- White powder-coated springs
- Steering
- Chassis-mounted #2075 servo
- Dual bellcrank design with integrated servo saver
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Oil-filled steel gear front and rear differentials
- Large 32-pitch steel spur gear
- Wheels and Tires
- Large 2.8” graphite gray wheels
- Tall 5.3” Sledgehammer tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Specifications
Length: 17.87 inches (454mm)
Width: 13.10 inches (333mm)
Ground Clearance: 2.44 inches (62mm)
Weight: 5.98 pounds (2.7kg) without batteries
Height: 8.34 inches (212mm)
Wheelbase: 11.62 inches (295mm)
Front Shock Length: 3.45 inches (88mm) - Long
Rear Shock Length: 3.98 inches (101mm) - XX-Long
Tires (pre-glued): 5.3 inches (133mm) tall Sledgehammer
Wheels: 2.8 inches (71mm) graphite gray wheels
Speed Control: BL-2s electronic speed control
Motor (electric): BL-2s 3300 kV sensorless brushless
Gear Pitch: 32
Overall Drive Ratio: 15.36:1
Differentials: Hardened steel bevel, sealed, limited slip
Chassis Structure / Material: Modular composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Dual bellcrank with integrated servo saver
Radio System: TQ 2.4 GHz (2-channel)
Servo: Waterproof #2075
Skill Level: 1
Battery Compartment (L/W/H): 162mm x 47mm x 26mm
Requires
(4) AA Batteries for transmitter | INCLUDED FREE ITEMS
TRA2827X - 3000mAh 7.4v 2-CELL LIPO BATTERY
TRA2920 - USB-C 2s LIPO iD CHARGER
This is the Traxxas Ford F-150 Raptor BL-2S 2WD Ready-to-Race Truck. The Slash Raptor comes fully-assembled with waterproof electronics, TQ 2.4 GHz 2-channel radio system, BL-2s brushless power system, and clipless painted body. Battery and charger are sold separately.
FORD F-150 RAPTOR STYLING
AWARD-WINNING SLASH PERFORMANCE
Based on the award-winning Slash, the Traxxas Ford F-150 Raptor combines show-stopping looks with legendary Slash toughness. Now Raptor comes standard with the BL-2s brushless power system for a more responsive throttle, powerful acceleration, and all-day fun. Raptor comes fortified with Traxxas’ Extreme Heavy Duty components to take even the most brutal punishment in stride.
BL-2S BRUSHLESS POWER SYSTEM
Raptor’s waterproof BL-2s brushless power system ramps up the fun with more torque, faster acceleration, and less maintenance than comparable brushed power systems. The BL-2s is a model of efficiency and refinement, offering more power than before with the safety and convenience that only Traxxas can deliver.
EXTREME HEAVY DUTY COMPONENTS
Extreme Heavy Duty components come factory-installed on Raptor for game-changing durability. Key drivetrain and suspension components are beefed-up with extra material for unbeatable strength. From HD suspension arms to upgraded driveshafts, Raptor sets a new standard for durability for your off-road adventures.
CLIPLESS FORD F-150 RAPTOR BODY
Raptor’s sleek clipless body comes fully detailed with an injection molded grille, front bumper, and body accessories to capture the full depth and detail of Ford’s original design. Raptor’s hidden latching system maximizes convenience and scale realism by removing traditional body clips which would interrupt the body’s clean lines.
Features
- Licensed Ford F-150 Raptor Clipless Body
- Injection molded grille, side mirrors, and hood vent
- Chassis nerf bars absorb impact and support the body
- Tough front and rear replica bumpers
- Holds tight for intense action
- Body reinforcements to prevent pull-through damage
- Holds tight for intense action
- Quick and easy removal
- Extreme Heavy Duty Upgrade Components
- Strengthened C-hubs, axle carriers, and steering blocks
- Extreme heavy duty driveshafts
- BL-2s Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan (3340)
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
- LiPo battery packs: 2 cells (7.4 volts)
- 3300 kV Brushless Motor
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 kV
- TQ 2.4 GHz Transmitter
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- Tough Fiber-Composite Monocoque Chassis
- Long 13.2″ wheelbase for increased stability
- Over 3.5″ of ground clearance
- Easy Access Battery Compartment
- Adjustable battery hold down
- Accepts 6- and 7-cell flat packs and 7-cell hump packs
- Accepts many 2s LiPo battery configurations
- Suspension
- Heavy-duty suspension arms
- Adjustable steel turnbuckles
- Oil-filled Ultra Shocks
- White powder-coated springs
- Steering
- Chassis-mounted 2075 servo
- High-performance bellcrank system minimizes bump steer
- Transmission
- Velineon-ready Magnum 272 metal-gear transmission
- Planetary gear differential with steel ring gear
- Sealed gearbox protects the transmission
- External gear cover with easy clutch access
- Drivetrain
- Extreme heavy-duty driveshafts
- Torque Control slipper clutch
- Wheels and Tires
- Split-Spoke SCT wheels
- 2.2″ outer diameter, 3″ inner diameter
- Replica BFGoodrich Mud Terrain T/A Tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Specifications
Length: 22.36 inches (568 mm)
Front Track: 11.65 inches (296 mm)
Rear Track: 11.65 inches (296 mm)
Center Ground Clearance: 3.5 inches (89 mm)
Weight (no battery): 4.76 pounds (2.16 kg)
Height (overall): 8.43 inches (214 mm)
Wheelbase: 13.2 inches (335 mm)
Shock Length (front): 3.45 inches (88 mm) - Long
Shock Length (rear): 3.98 inches (101 mm) - XX-Long
Tires: Replica BFGoodrich Mud Terrain T/A Tires
Tire Diameter: 4.3″ x 1.7″ inches (109 mm x 43 mm)
Wheels (front/rear): Split-Spoke SCT wheels
Wheel Diameter: 2.2 inches (56 mm) (outer)
3.0 inches (76 mm) (inner)
Speed Control: BL-2s electronic speed control
Motor (electric): BL-2s 3300 kV sensorless brushless
Overall Drive Ratio: 12.58:1
Differential Type: Planetary
Gear Pitch: 48
Chassis Structure/Material: Composite tub
Drive System: 2WD
Steering: Dual-bellcrank with integrated servo saver
Radio System: TQ 2.4 GHz (2-channel)
Servo: Waterproof digital 2075 servo (125 oz-in torque)
Skill Level: 1
Battery Compartment (L/W/H): 165 mm (6.49″) x 50 mm (1.95″) x 23/25 mm (1.02″/0.90″)
Requires
(4) AA Batteries for Transmitter
USB-C Charging Cable and Block**
**TRA #2920 - Full charging output requires a 45 watt or greater power supply like the Traxxas 2912 and high-quality USB-C cable like the Traxxas 2916. | This Combo Includes:
Traxxas Stampede 4x4 VXL Truck
EZ-Peak ID LiPo Charger
11.1V 3S 4000mAh LiPo Battery
This is the Traxxas Stampede 4X4 VXL Brushless Ready-to-Run Waterproof Monster Truck Ready-To-Race, with TQi 2.4 GHz 2-channel radio system, TSM, Extreme Heavy Duty Upgrade Kit, VXL-3s speed control, 540XL brushless motor, and clipless painted ProGraphix body.
Battery and charger are sold separately.
Stampede 4X4 VXL - BACK WITH A VENGEANCE
Stampede 4X4 VXL is back--bigger and stronger than ever before! Backed by the massive torque of the Velineon 540XL motor, Stampede muscles its way over the toughest obstacles and reaches speeds of 60 mph and beyond. Stampede 4X4 comes outfitted to shred any terrain with the strength of Traxxas’ Extreme Heavy Duty Upgrade Kit and aggressive grip of its huge 5.3″ Sledgehammer tires. Drive harder, go faster, hang tougher— nothing stops Stampede 4X4 VXL!
Hoss 4X4 VXL is now Stampede 4X4 VXL
540XL TORQUE
For those who believe “there’s no replacement for displacement,” Traxxas has built a monster truck for you. Stampede 4X4 VXL packs the same Velineon 540XL brushless motor found in the Maxx extreme monster truck. It’s the largest motor we’ve ever offered in a truck this size. The Velineon VXL-3s speed control rolls out the power smoothly utilizing large 6.5 mm connectors and an integrated cooling fan for fast, reliable fun.
EXTREME HEAVY DUTY UPGRADE KIT
Along with added power, Stampede 4X4 VXL also gets a massive boost in strength with its factory-installed Extreme Heavy Duty Upgrade Kit. The kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.
EXTREME SLEDGEHAMMER GRIP
Stampede 4X4 VXL relies on huge Sledgehammer tires to put its massive torque to the ground. The 5.3″ tall Sledgehammers lift Stampede skyward for superior ground clearance and a menacing stance. The open-block tread design clears away mud and debris for unrivaled traction on loose surfaces. Sledgehammer tires come pre-glued with performance foam inserts and they’re TSM-rated for speeds of 60 mph and beyond!
Features
- Clipless Body
- Tough reinforced bumpers
- Reinforced inner cage
- Rugged roof rollover protector
- Tailgate protector
- Quick and easy removal
- Holds tight for intense action
- Extreme Heavy Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Maxx duty driveshafts
- Oversize diameter
- 6 mm axles
- Steel wheel hexes
- TQi 2.4 GHz High Output Radio System
- Traxxas Link enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to
- 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Multi-Function knob
- Patented waterproof receiver box with easy-access plug
- VXL-3s Waterproof Electronic Speed Control
- Cooling fan with large heat sink
- Three Programmable Drive Profiles:
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-9 cells (7.2 to 10.8 volts)
- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
- Velineon 540XL Brushless Motor
- Long format brushless motor
- 4-pole 2400 kV
- 5 mm output shaft
- Precision-balanced rotor
- Brilliant blue-anodized finish
- Up to 60+ mph with 3s LiPo battery (sold separately)
- Traxxas Stability Management
- Helps prevents spinouts and loss of control
- Adjusts from off to 100% assistance from the transmitter
- Chassis
- Modular composite tub design
- Secure battery hold-down latch
- Reinforced integrated wheelie bar
- High-approach bumpers
- Integrated nerf bars for side impact resistance
- Suspension
- Adjustable 4 mm steel toe and camber links
- HD suspension arms
- Oil-filled Ultra Shocks
- Rugged front and rear shock towers
- White powder-coated springs
- Steering
- Chassis-mounted 2075 servo
- Dual bellcrank design with integrated servo saver
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Torque-Biasing Center Drive absorbs shocks and distributes power evenly
- Oil-filled steel gear front and rear differentials
- Large 32-pitch steel spur gear
- Anodized-aluminum center driveshaft
- Wheels and Tires
- Large 2.8″ black chrome wheels
- Tall 5.3″ Sledgehammer tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Reinforced Front and Rear Bumpers
Tough reinforced bumpers protect the chassis against impacts. The specially designed front bumper provides a high approach angle that allows Stampede to climb up and over obstacles with ease. The rear bumper mounts a perfectly positioned wheelie bar to help prevent the Stampede 4X4 VXL from back-flipping under its explosive power.
Sledgehammer Tires and 2.8" Black Chrome Wheels
Large 5.3" Sledgehammer tires combine excellent ground clearance with true mud-slinging fun. The open-block tread design claws into gravel, dirt, and grass for sure-footed 4X4 traction on nearly any surface. The heavy-duty rubber compound is specially formulated to resist tearing and bonds exceptionally well to the aggressive black chrome wheels.
Modular Chassis
Stampede 4X4's modular design creates a chassis that's both strong and easy to maintain. The front and rear bulkheads remove easily with just a few screws. In less than a minute using a power screwdriver, you'll have full access for easy service and adjustment.
Heavy-Duty Composite Arms
Molded from our toughest composite material, Stampede 4X4 VXL's heavy-duty suspension arms provide just the right amount of flex to resist breaking—even in cold weather! From skate parks to 10-foot ramps, these heavy-duty arms stand up to even the most punishing drivers for non-stop fun behind the wheel.
Ultra Shocks
Oil-filled Ultra Shocks utilize dual X-ring technology for a perfect seal and silky-smooth performance. The large oil capacity and rugged design soaks up big jumps and off-road abuse for smooth driving performance. They are easy to tune with a wide range of available oils, springs, and pistons.
5-Channel Receiver with Failsafe
The TQi 2.4 GHz radio system stores up to thirty models in memory, allowing you to use one transmitter for your entire RC garage. Integrated telemetry ports in the receiver transmit real-time data to the TQi transmitter when using the Traxxas Link App and telemetry sensors (sold separately). In the event of signal loss, the receiver automatically returns the throttle to neutral and holds the last steering position.
Waterproof Receiver Box
Stampede 4X4 VXL incorporates a waterproof receiver box in the nose of the chassis to save weight and provide a clean, high-tech appearance. The antenna and servo wires route neatly through a patented watertight seal to protect the receiver from water. No matter what the weather, Stampede is ready for action!
Optimum-Geometry Steering with Integrated Servo Saver
A dual-bellcrank design pivots on rubber-sealed ball bearings for smooth action in the harshest conditions. The integrated cam-type servo saver protects the servo gears from crash impacts without sacrificing steering precision.
Digital High-Torque Waterproof Steering Servo
Stampede 4X4 VXL's extreme speed and tall Sledgehammer tires require a steering servo that's both strong and durable. The waterproof 2075 digital high servo provides robust steering authority with ball bearings for precise control and quick reflexes.
VXL-3s ESC with Fan
The waterproof Velineon VXL-3s speed control is packed with technology to deliver maximum power. Large heat sink, integrated on/off switch, and three programmable drive profiles top the feature list. Two-stage low voltage detection allows full LiPo compatibility, including powerful 11.1-volt 3s packs!
Chassis Nerf Bars
Rugged side nerf bars protect the chassis from rocks and other impacts. Special channels in the nerf bars support the sides of the body for a tighter, more secure fit.
Velineon 540XL Motor
A sensorless Velineon 540XL 2400 kV motor delivers extreme performance with nearly zero maintenance. Ultra high-temperature Neodymium magnets, high-speed bearings, and a precision, 4-pole balanced rotor deliver smooth running and long life.
Fixed Gear Adapter
Fixed gear adapters take the guesswork out of setting your gear mesh. The fixed positioning keeps the gear mesh tight, even after the harshest landings. The innovative motor mount keeps the 540XL motor locked firmly in place with just a single screw for easy maintenance.
Heavy-Duty 4 mm Turnbuckles
Stampede 4X4 VXL's 4mm turnbuckles feature broad flat sections make toe and camber adjustments easy with the included wrench. The fully captured rod ends take a beating and won’t pop apart during rigorous off-road pounding.
Maxx-Duty Driveshafts
Stampede 4X4 VXL's Maxx-duty driveshafts with beefed-up U-joints are built to handle brushless power without breaking a sweat. Large 6 mm axles key into the included steel wheel hexes for unmatched strength and durability.
Steel-Gear Differentials
Sealed front and rear differentials utilize steel-gear internals for maximum durability. Silicone gaskets and X-ring seals allow you to tune the amount of locking action by varying the viscosity of the fluid inside the differentials.
Extruded Aluminum Driveshaft
A one-piece extruded aluminum driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies. Altogether, this shaft runs straight and true for ultra-smooth driveline operation.
Heavy-Duty Steel Spur Gear
Designed from the start to handle big brushless horsepower, Stampede 4X4 VXL's driveline uses a rugged steel spur gear with large 0.8 module/32-pitch teeth for reliability no matter how much power you pour on.
Specifications
Scale: 1/10
Length: 20.24 inches (514 mm)
Width: 13.10 inches (333 mm)
Ground Clearance: 2.75 inches (70 mm)
Weight: 6.3 pounds (2.9 kg) without batteries
Height: 8.34 inches (212 mm)
Wheelbase: 11.62 inches (295 mm)
Front Shock Length: Long
Rear Shock Length: XX-long
Tires (pre-glued): 5.3″ (133 mm) tall Sledgehammer
Wheels: 2.8″ (71 mm) black chrome
Speed Control: VXL-3s
Motor (electric): Velineon 540XL brushless
Transmission: Single speed with Torque-Biasing Center Drive
Overall Drive Ratio: 10.99:1
Differentials: Sealed, 2-gear
Chassis: Modular composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Dual bellcrank with integrated servo saver
Radio System: TQi 2.4 GHz 2-ch transmitter with 6533 TSM receiver
Servo: Waterproof 2075
Top Speed (optional gearing): 60+ mph with 3-cell LiPo and 23/50 gearing
Skill Level: 1
Battery Compartment: 162 mm x 47 mm x 26 mm *35 mm with optional battery strap (9026, sold separately)
Requires
(4) AA Batteries for transmitter
| INCLUDED FREE ITEMS
TRA2827X - 3000mAh 7.4v 2-CELL LIPO BATTERY
TRA2920 - USB-C 2s LIPO iD CHARGER
This is the Traxxas BIGFOOT 4X4 Brushless 1/10 Ready-to-Run Waterproof Radio Controlled Monster Truck with TQ 2.4 GHz 2-channel radio system, BL-2s brushless power system, and BIGFOOT No. 8 painted body.
BIGFOOT 4X4
Classic Style with Brushless Performance!
Traxxas brings back the glory days of monster truck racing with the new BIGFOOT 4X4 equipped with BL-2s brushless power and Traxxas’ toughest 4X4 driveline. BIGFOOT 4X4 comes outfitted with a clipless BIGFOOT No. 8 body and factory-installed Extreme Heavy Duty components to take the most brutal punishment in stride. From the stadium to your own backyard, Traxxas delivers all-day fun and excitement with the new BIGFOOT 4X4 monster truck.
Extreme HD 4X4 Driveline
BIGFOOT 4X4 uses a shaft-driven four-wheel-drive system for extreme traction in any environment. A tough center driveshaft joins the front and rear steel-gear differentials to distribute the brushless motor’s massive torque. Huge Maxx-Duty driveshafts keep power flowing to BIGFOOT’s towering monster truck wheels with unrivaled durability.
BL-2s Brushless Power System
BIGFOOT’s waterproof BL-2s brushless power system ramps up the fun with more torque, faster acceleration, and less maintenance than comparable brushed power systems. The BL-2s is a model of efficiency and refinement, offering more power than before with the safety and convenience that only Traxxas can deliver.
Clipless Replica Body
BIGFOOT 4X4 comes Ready-To-Race with a beautifully detailed BIGFOOT No. 8 clipless replica body. Bright chrome bumpers stand out against the brilliant blue paint and unmistakable red and yellow stripes. BIGFOOT 4X4’s convenient hidden latching system replaces traditional body clips with clean lines and a secure hold.
Features
- Licensed BIGFOOT No. 8 Clipless Body
- Brilliant blue metallic officially licensed Ford F-150 body
- Chrome front and rear bumpers
- Holds tight for intense action
- Quick and easy removal
- BL-2s Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan (3340)
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
- LiPo battery packs: 2 cells (7.4 volts)
- 3300 Kv Brushless Motor
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 Kv
- TQ 2.4 GHz Transmitter
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- Extreme Heavy-Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Maxx-duty driveshafts
- Oversize diameter
- 6 mm axles
- Steel wheel hexes
- Chassis
- Modular composite tub design
- Secure battery hold-down latch
- High angle bumpers
- Wheelie bar
- Suspension
- HD-composite suspension arms
- Oil-filled Ultra Shocks
- White powder-coated springs
- Steering
- Chassis-mounted 2075 servo
- Dual bellcrank design with integrated servo saver
- Drivetrain
- Full-time shaft-driven four-wheel drive
- Sealed steel gear front and rear differentials
- Large 32-pitch steel spur gear
- Wheels and Tires
- Dual-profile white monster truck wheels
- Replica military-style axle hubs
- Pre-glued high profile Terra Groove shaved monster truck tires with foam inserts
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Wheelie Bar
BIGFOOT 4X4 is a wheelie machine thanks to the monstrous power of the BL-2s brushless power system. BIGFOOT’s wheelie bar offers four-position adjustments for complete wheelie control and incorporates a convenient carry handle.
Long-Travel Suspension
BIGFOOT has huge amounts of seemingly bottomless, ultra-plush suspension travel to swallow up jumps and delivers incredible control. Performance-optimized suspension components provide maximum articulation without binding or interference.
Modular Chassis
BIGFOOT’s modular design creates a chassis that's both strong and easy to maintain. The front and rear bulkheads remove easily with just a few screws. In less than a minute using a power screwdriver, you'll have full access for easy service and adjustment.
Digital High-Torque Waterproof Steering Servo
BIGFOOT’s large monster truck tires and go-anywhere capability require a steering servo that’s both strong and durable. The waterproof 2075 digital high servo provides robust steering authority with ball bearings for precise control.
Waterproof Receiver Box
BIGFOOT 4X4 incorporates a waterproof receiver box in the nose of the chassis to save weight and provide a clean, high-tech appearance. The antenna and servo wires route neatly through a patented watertight seal to protect the receiver from water. No matter what the weather, BIGFOOT is ready for action!
3-Channel Receiver with Fail-Safe Security
In the event of signal loss due to an accidental transmitter switch-off or depleted batteries, the receiver automatically returns the throttle to neutral and holds the last commanded steering position. The fail-safe programming is conveniently built-in and does not need to be activated.
Dual Bellcrank Steering with Servo Saver
BIGFOOT’s dual-bellcrank design pivots smoothly even in the harshest conditions. An integrated cam-type servo saver protects the steering servo from crash impacts without sacrificing steering precision.
Upgraded Slipper Clutch
BIGFOOT 4X4 uses an upgraded slipper clutch with larger alloy pressure plates and high-temperature aluminum pads for superior power handling. The slipper clutch delivers equal power distribution front to rear for instant throttle response through the drive system and aggressive four-wheel grip from the Sledgehammer tires.
*Click to See the Full Line of Parts/Accessories
Specifications
Length: 20.24 inches (514 mm)
Width: 13.10 inches (333 mm)
Ground Clearance: 2.44 inches (62 mm)
Weight: 5.98 pounds (2.7 kg) without batteries
Height: 8.34 inches (235 mm)
Wheelbase: 11.62 inches (295 mm)
Front Shock Length: 3.45 inches (88 mm) - Long
Rear Shock Length: 3.98 inches (101 mm) - XX-long
Tires: 2.2″ Terra Groove with foam inserts
Wheel Diameter: Dual-profile (2″ outer, 3″ inner) white monster truck
Speed Control: BL-2s electronic speed control
Motor (electric): BL-2s 3300 Kv sensorless brushless
Gear Pitch: 32 pitch
Overall Drive Ratio: 15.36:1
Differentials: Hardened steel bevel, sealed, limited slip
Chassis Structure / Material: Modular composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Dual bellcrank with integrated servo saver
Radio System: TQ 2.4 GHz (2-channel)
Servo: Waterproof 2075
Skill Level: 1
Battery Compartment (L/W/H): 162 mm x 47 mm x 26 mm
Required Batteries: 4 “AA” (transmitter), Vehicle (see battery finder)
Requires
(4) AA Batteries for Transmitter
USB-C Charging Cable and Block**
**TRA #2920 - Full charging output requires a 45 watt or greater power supply like the Traxxas 2912 and high-quality USB-C cable like the Traxxas 2916. | This is the Traxxas XRT 4WD Brushless Ready-to-Race Truck COMBO with two 4S 6700mAh batteries and the EZ-Peak Live ID DUAL OUTPUT quick charger, with TQi Traxxas Link Enabled 2.4GHz Radio System, Velineon VXL-8s brushless ESC (fwd/rev), and Traxxas Stability Management (TSM).
XRT: RACE-INSPIRED ENGINEERING - EXTREME 8S POWER AND SPEED
The Traxxas XRT fuses race-inspired design and engineering with X-Maxx power and strength. The result is an all-new platform with sharp reflexes and unprecedented stability that is capable of exploiting the upper range of extreme 8s power and speed.
BUILT FOR SPEED AND HANDLING
XRT was engineered with a focus on speed, handling, and performance. XRT’s low center of gravity, ultra-wide stance and low-profile body deliver confidence and control as XRT accelerates across the wide-open spaces to an all-out speed of 60+MPH.
PROVEN TOUGH ALL-METAL DRIVELINE
XRT performance and durability begins with its all-metal 8s driveline. Steel 4-gear differentials and steel driveshafts are joined by a high-strength extruded aluminum center shaft. It’s a precision-engineered recipe that has been proven monster-truck tough in the X-Maxx.
RACE-INSPIRED LOW-CG CHASSIS
XRT’s performance-focused chassis design is configured to lower the center of gravity for superior handling and stability. The dual 6700 4s batteries and the steering servo are positioned to place the weight as low as possible in the chassis and provide protection for these critical components.
PATENT-PENDING CLIPLESS BODY
XRT’s patent-pending clipless body easily removes and installs in just seconds and yet it locks in place with incredible strength and security. The system uses a cage inside the body to minimize flex while external skids are strategically placed to protect the body.
GRAVIX RACE TIRES
XRT’s Gravix race tires are a revolutionary new hybrid design with densely packed biting edges and sipes. They deliver outstanding grip on hard-packed surfaces along with fast and quiet-running precision.
VXL-8S POWER SYSTEM
Already Traxxas’ most powerful speed control, XRT’s VXL-8s goes even further with an aggressive tune that maximizes power output across the entire RPM range. More power under the curve delivers mid-range punch that hits hard for rolling wheelies on demand. Bury the throttle at any speed and XRT responds instantly with effortless acceleration.
Features
- VXL-8s Waterproof Electronic Speed Control
- Aggressive tuning for more power at any RPM
- 8s LiPo compatible
- Built-in cooling fan
- Real-time telemetry via Traxxas Link
- Machined heat sinks
- 10-gauge silicone wire
- Integrated protection circuits
- LED status lights
- Velineon 1200XL Brushless Motor
- “Big Block” brushless motor
- 4-pole 1275 kV
- 5mm output shaft
- Oversize aluminum heatsink for improved cooling
- Dual cooling fans
- Up to 60+ mph with Two 4s LiPo Batteries and Included Optional Speed Gear
- Traxxas Stability Management (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- TQi 2.4GHz High Output Radio System
- TQi 2-channel transmitter
- Automatically stores and loads settings for up to 30 Traxxas
- Link-enabled models
- Programmable multi-function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- High 13ms frame rate and near-zero latency for responsive control
- 5-channel micro receiver (#6533) with fail-safe security
- Patented waterproof receiver box with easy-access plug
- X-Maxx Spec 8s Drivetrain
- Full-time shaft-driven 4-wheel drive
- Heavy-duty steel CV driveshafts & axles
- Splined aluminum center driveshaft
- Fully machined aluminum stub axles
- Transmission
- Mod-1 steel pinion and spur gears
- Fixed gear mesh system
- Torque-Biasing Center Drive
- X-Maxx Spec 8s Differentials
- Heavy-duty sealed 4-gear design
- Large scale steel ring and pinion gears
- Splined outdrives attached with external thru-bolt method
- Reinforced bulkhead and covers increase bearing support
- Rock-Solid Motor Mounting System
- Precise preset gear mesh adjustments
- 4 keyed pins lock the motor in place
- Motor retention separate from gear mesh
- GTX Race Shocks
- Machined aluminum threaded body
- Extra-large bore and capacity
- 5.2mm damper shaft
- Lower seal cartridge includes integrated wiper seal combination
- Height-adjustable spring retainer
- Heavy-duty composite shock caps with pivot balls
- Lower spring perches bolted on
- WideMaxx Suspension
- Extra-wide suspension arms
- Made from heavy-duty cold-weather composite
- Performance-optimized geometry
- Double-shear connections
- High-strength steel suspension pins with retainers
- 4mm machined pivot balls
- Fixed high-strength camber and toe links
- Heavy-duty steering blocks and axle carriers
- Oversized wheel bearings
- Low-CG Chassis Design
- Modular chassis with interlocking bulkheads
- Low center of gravity for improved handling
- Flat bottom design
- Heavy-duty interlocking skid plates
- High-strength buttressing on shock towers
- Dual snap-lock battery compartments
- Protects batteries from side impacts
- Allows secondary battery-clip security
- Interlocking components for tight tolerances
- Wire management for clean appearance
- Patent-Pending Clipless Body
- Snaps in place in just seconds
- Secure body latches are easy to use
- Rigid internal frame
- Dual cold-air intakes
- Molded body reinforcements for tear-through protection
- Protective top skids
- Rugged high-downforce rear wing
- Heavy-Duty Bumpers
- Reinforced front bumper and rear wing support
- Absorb impact forces while retaining shape
- Nerf bars for side impact resistance
- Heavy-duty wheelie bar with carry handle
- Wheels and Tires
- 7.4" Gravix race tires
- Low sidewall for sharp turn-in response
- Thick center carcass resists ballooning at high speed
- Lower rotational mass for faster acceleration
- 4.0" matte black XRT race wheels
- High-strength glue and bead design
- Huge 24mm splined wheel hubs
- Steering
- Powerful 365 oz-in steering servo
- Heavy-duty cam-style servo saver
- Dirt evacuation channels
- Fully waterproof
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
High-Downforce Wing
XRT's rear wing provides added stability for 60+mph speed runs and integrates neatly with the clipless body for a sophisticated look. The wing mount soaks up even the hardest landings without transferring shock energy to the chassis.
Integrated Cold-Air Intakes
Cold-air intakes are fully integrated into XRT's clipless body frame for maximum strength and tear prevention. The lower intake even features an internal grille to keep rocks and other debris out of the chassis and away from the steering components.
Integrated Shock Tower Design
XRT's shock towers are an integral part of the frame with massive buttresses to dissipate shock loads throughout the chassis. Heavy-duty receivers secure the clipless body latches directly to the towers for maximum strength.
Rugged Top Skids
XRT's rugged top skids protect the clipless body from damage. Internal reinforcements maintain the body's integrity.
Integrated Wheelie Bar
XRT's wheelie bar helps prevent backflips under full-throttleacceleration and flexes to absorb impacts on less-than-perfect landings. The integrated wheelie bar also functions as a convenient handle to transport XRT to your next adventure.
Aluminum Heatsink with Dual Fans
XRT's aluminum heatsink wraps around nearly 75% of the motor's exposed surface to pull out more heat. Dual electric fan shrouds draw cooling air from the body vents through the oversized fins for more effective cooling performance and longer run times.
Rugged Skid Plates
XRT's three rugged skid plates key together tightly to protect the chassis from damage. The front skid plate was designed at just the right angle to kick the front end up and prevent digging into the ground when landing nose down.
Specifications
Length (including wing): 31.41 inches (798mm)
Front Track: 23.43 inches (595mm)
Rear Track: 23.43 inches (595mm)
Ground Clearance: 1.93 inches (49mm)
Weight: 19.70 pounds (8.94kgs) - without body
21.03 pounds (9.54kgs) - with body
23.87 pounds (10.83kgs) - with body & two 4s 6700mAh LiPos
Height: 10.15 inches (258mm) - ride height
12.12 inches (308mm) - full droop
Wheelbase: 18.9 inches (480mm)
Shock Length (front): 6.79 inches (173mm)
Shock Length (rear): 6.79 inches (173mm)
Tires (Pre-Glued): 7.4 x 4.0 inches (188mm x 102mm)
Wheels: 4.3 x 5.7 inches (110mm x 147mm)
Speed Control: Velineon VXL-8s
Motor (electric): Velineon 1200XL Brushless with heat sink and dual fan shrouds
Overall Drive Ratio: 20.6:1 (20/50 motor pinion and spur gear)
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch (Spur and Pinion): Module 1.0
Chassis Structure/Material: Composite Nylon Tub
Brake Type: Electronic
Drive System: Shaft-driven 4WD
Steering: Bellcrank
Radio System: TQi 2.4GHz Transmitter with TSM receiver
Servo: Torque: 365oz. Speed: 0.17 sec/ 60 degrees(6.0V)
Top Speed: 60+ MPH with two 4s LiPo batteries and included optional gearing
Skill Level: 5
Battery Tray: 186mm x 51mm x 44mm
Requires
(4) AA batteries for the transmitter
| This Combo Includes:
Traxxas Rustler 4x4 VXL Truck
EZ-Peak ID LiPo Charger
11.1V 3S 4000mAh LiPo Battery
This is the Traxxas Rustler 4X4 VXL Brushlessfully-assembled, waterproof electronics, Ready-To-Race, with TQi 2.4 GHz 2-channel radio system, TSM, Extreme Heavy Duty Kit, VXL-3s brushless power system, and clipless painted ProGraphix body.
Rustler 4X4 VXL - The Stadium Truck Redefined
Extreme 4X4 stadium truck speed and excitement now equipped with the Extreme Heavy Duty upgrade kit.Rustler 4X4 VXL is a hard-charging wheelie machine that captures the speed and style of a stadium truck and injects it with a massive dose of strength and power. Beneath Rustler’s clipless body, the extreme Velineon brushless power system feeds power through the factory-installed Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability.
EXTREME HEAVY DUTY UPGRADE KIT
Rustler 4X4 VXL’s factory-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Rustler.
SELF-RIGHTING
Rustler 4X4 VXL uses Traxxas’ patented self-righting feature to keep the fun going, even when you get carried away with the wheelies or land that big trick upside down. Simply press a button on the TQi transmitter and, in most circumstances*, Rustler 4X4 VXL will be back on its wheels in just seconds and ready for more action! *3s power recommended for optimal performance
CLIPLESS BODY MOUNTING
Rustler 4X4 VXL uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. The sleek, aerodynamic body features a rugged internal structure and external rollover protection for long life and Traxxas-Tough durability.
Features
- Clipless ProGraphix Body
- Easy one-handed removal
- Reinforced inner cage
- Strong oversized latch
- Rugged roof rollover protector
- Molded composite plastic wing
- Extreme Heavy Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Maxx duty driveshafts
- Oversize diameter
- 6 mm axles
- Steel wheel hexes
- TQi 2.4 GHz High Output Radio System
- TQi 2-channel transmitter
- 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Compatible with optional TQi Traxxas Link Wireless Module
- (6511) to access full Traxxas Link app functionality (sold separately)
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
- Programmable multi-function knob
- Patented waterproof receiver box
- VXL-3s Waterproof Electronic Speed Control
- Three programmable drive profiles:
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Large heat sink
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-9 cells (7.2 to 10.8 volts)
- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
- Velineon Brushless Motor
- Ultra high-temperature sintered Neodymium magnets
- Low-maintenance design
- Efficient, high-speed ball bearings
- Precision-balanced rotor
- 3500 kV
- Brilliant blue-anodized finish
- Traxxas Stability Management (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Maintains steering composure to allow throttle-on powerslides
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- Chassis
- Low-CG design for responsive handling
- Modular composite tub design
- Latching battery hold-down
- Reinforced integrated wheelie bar
- High-approach front bumper to climb curbs
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Oil-filled steel gear front and rear differentials
- Large 32-pitch gearing
- Torque Control heavy-duty slipper clutch with aluminum pads
- Anodized-aluminum center driveshaft
- Steering
- Chassis-mounted 2075 servo
- Dual bellcrank design with integrated servo saver
- Suspension
- Adjustable 4 mm steel toe and camber links
- HD suspension arms
- Oil-filled Ultra Shocks
- Rugged front and rear shock towers
- White powder-coated springs
- Wheels and Tires
- Large 2.8″ black chrome wheels
- Talon EXT tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Modular Chassis
Rustler 4X4' s modular chassis features front and rear bulkheads that remove easily with just a few screws. In less than a minute using a power screwdriver, you’ll have full access for easy service and adjustment.
Velineon 3500 Motor
A sensorless Velineon 3500 kV motor delivers extreme performance with nearly zero maintenance. Ultra high-temperature Neodymium magnets, high-speed bearings, and a precision, 4-pole balanced rotor deliver smooth running and long life.
VXL-3s
The waterproof Velineon VXL-3s speed control is packed with technology to deliver maximum power. Large heat sink, integrated on/off switch, and three programmable drive profiles top the feature list. Two-stage low voltage detection allows full LiPo compatibility, including powerful 11.1-volt 3s packs!
Waterproof Receiver Box
Rustler's innovative waterproof receiver box allows easy access to the receiver. The antenna and servo wires route neatly through a patented watertight seal to protect the receiver from water. No matter what the weather, Rustler 4X4 is ready for action!
5-Channel Receiver with Failsafe
The TQi 2.4 GHz radio system stores up to thirty models in memory, allowing you to use one transmitter for your entire RC garage. Integrated telemetry ports in the receiver transmit real-time data to the TQi transmitter when using the Traxxas Link App and telemetry sensors (sold separately). In the event of signal loss, the receiver automatically returns the throttle to neutral and holds the last steering position.
Talon EXT 2.8" Tires and Black Chrome Wheels
Rustler's large 2.8" black chrome wheels provide terrain-conquering ground clearance and a commanding presence. Talon EXT tires have a square-shouldered, aggressive tread design to dig into gravel, dirt, and grass for incredible 4X4 traction and huge roost.
Ultra Shock
Oil-filled Ultra Shocks utilize dual X-ring technology for a perfect seal and silky-smooth performance. The large oil capacity and rugged design soaks up big jumps and off-road abuse for smooth driving performance. They are easy to tune with a wide range of available oils, springs, and pistons.
Digital High-Torque Waterproof Steering Servo
Rustler 4X4 VXL's extreme speed and quick reflexes require a steering servo that's both strong and fast. The included digital high-speed, high-torque servo features ball bearings for precise control and quick reflexes.
Heavy-Duty Suspension Arms
Heavy-duty suspension arms are stronger than ever before. Molded from a tough new composite material, the arms stand up to even the most punishing drivers and resist breakage for non-stop fun behind the wheel.
Extruded Aluminum Driveshaft
A one-piece extruded aluminum driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies. Altogether, this shaft runs straight and true for ultra-smooth driveline operation.
Maxx-Duty Driveshafts
Rustler 4X4’s Maxx-duty driveshafts with beefed-up U-joints are built to handle brushless power without breaking a sweat. Large 6 mm axles key into the included steel wheel hexes for unmatched strength and durability.
Heavy-Duty 4 mm Turnbuckles
Rustler 4X4 uses the same heavy-duty steel 4 mm turnbuckles developed for the Slash 4X4. Broad flat sections make toe and camber adjustments easy with the included wrench. The fully captured rod ends take a beating and won't pop apart during rigorous off-road pounding.
Functional Rear Wing
The functional rear wing reduces drag while still providing valuable downforce for high speed stability. The wing mounts directly to the internal body reinforcements for lasting durability.
Specifications
Length: 18.78 inches (477 mm)
Width: 12.94 inches (329 mm)
Ground Clearance: 1.1 inches (27 mm)
Weight: 5.12 pounds (2.32 kg)
Height: 6.35 inches (161 mm)
Wheelbase: 11.62 inches (295 mm)
Front Shock Length: Long
Rear Shock Length: XX-long
Tires (pre-glued): 4.5″ x 2.3″ (114 mm x 58 mm) Talon EXT
Wheels: 2.8 inches (71 mm) black chrome
Speed Control: VXL-3s
Motor (electric): Velineon 3500 brushless
Transmission: Single speed
Overall Drive Ratio: 13.97:1
Differentials: Sealed, 2-gear
Chassis Structure / Material: Composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Bellcrank with integrated servo saver
Radio System: TQi 2.4 GHz 2-ch transmitter with 6533 TSM receiver
Servo: Waterproof 2075
Top Speed (optional gearing): 65+ mph with 3-cell LiPo and 20/54 gearing (TRA3950X and TRA3956)
Skill Level: 1
Battery Compartment: 162 mm x 50mm x 25 mm
Requires
(4) AA Batteries for transmitter
|
Rating & Review
There are no reviews yet.