Content | This Combo Includes: Traxxas Stampede 4X4 Brushless Truck EZ-Peak ID LiPo Charger 7.4V 2S 5800mAh LiPo Battery
This is the Traxxas Stampede 4X4 Brushless Ready-to-Run Waterproof Radio Controlled Monster Truck 2S Lipo Combo with 5800mAh 2S LiPo, EZ-Peak ID Charger, with clipless body, extended chassis, Extreme Heavy Duty Upgrade Kit, BL-2s Brushless power system and the TQ 2.4GHz Radio System (Traxxas Bluetooth Link Module Compatible - Module sold separately).
Stampede 4X4 Brushless
Bigger and Stronger Then Ever!
Stampede 4X4 is bigger and badder than ever with a new clipless body, extended chassis, and huge 5.3″ Sledgehammer tires for an aggressive monster truck stance. Stampede’s all-new BL-2s brushless power system delivers effortless power for all-day fun with an added boost of torque for terrain-shredding burnouts and powerful acceleration. Stampede 4X4 also comes standard with Traxxas’ Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability.
NEW BL-2S BRUSHLESS POWER SYSTEM
Stampede 4X4’s BL-2s brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Stampede 4X4 to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 kV is long-lasting and requires virtually no maintenance.
EXTREME HEAVY DUTY UPGRADE KIT
Stampede 4X4’s pre-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.
CLIPLESS BODY MOUNTING
Stampede 4X4 now uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. A rugged internal cage attaches to the body with molded reinforcements to prevent pull-through damage. Tough roof and tailgate skids protect the body in the event of a rollover.
Features
- BL-2s Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan (#3340)
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
- LiPo battery packs: 2 cells (7.4 volts)
- 3300 kV Brushless Motor
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 kV
- TQ 2.4 GHz Transmitter
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- Extreme Heavy-Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Extreme heavy-duty driveshafts
- Oversize diameter
- 6mm axles
- Steel wheel hexes
- Clipless ProGraphix Body
- Tough reinforced bumpers
- Reinforced inner cage
- Rugged roof rollover protector
- Tailgate protector
- Holds tight for intense action
- Quick and easy removal
- Chassis
- Modular composite tub design
- Secure battery hold-down latch
- High angle bumpers
- Suspension
- HD-composite suspension arms
- Oil-filled Ultra Shocks
- White powder-coated springs
- Steering
- Chassis-mounted #2075 servo
- Dual bellcrank design with integrated servo saver
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Oil-filled steel gear front and rear differentials
- Large 32-pitch steel spur gear
- Wheels and Tires
- Large 2.8” graphite gray wheels
- Tall 5.3” Sledgehammer tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Specifications
Length: 17.87 inches (454mm)
Width: 13.10 inches (333mm)
Ground Clearance: 2.44 inches (62mm)
Weight: 5.98 pounds (2.7kg) without batteries
Height: 8.34 inches (212mm)
Wheelbase: 11.62 inches (295mm)
Front Shock Length: 3.45 inches (88mm) - Long
Rear Shock Length: 3.98 inches (101mm) - XX-Long
Tires (pre-glued): 5.3 inches (133mm) tall Sledgehammer
Wheels: 2.8 inches (71mm) graphite gray wheels
Speed Control: BL-2s electronic speed control
Motor (electric): BL-2s 3300 kV sensorless brushless
Gear Pitch: 32
Overall Drive Ratio: 15.36:1
Differentials: Hardened steel bevel, sealed, limited slip
Chassis Structure / Material: Modular composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Dual bellcrank with integrated servo saver
Radio System: TQ 2.4 GHz (2-channel)
Servo: Waterproof #2075
Skill Level: 1
Battery Compartment (L/W/H): 162mm x 47mm x 26mm
Requires
(4) AA Batteries for transmitter | This Combo Includes:
Traxxas Slash 4x4 VXL Truck with Extreme Heavy Duty Kit and Clipless Body
EZ-Peak ID 4-AMP LiPo Charger
7.4V 5800mAh LiPo Battery
This is the Traxxas Slash 4x4 Brushless VXL Fully-Assembled Ready-to-Race 1/10 Short Course Truck with LiPo combo package! This package includes a Traxxas EZ-Peak ID 4-amp quick charger and a 7.4V 5800mAh LiPo battery for extended runtimes and extra performance! The truck comes with Traxxas Stability Management (TSM), TQi 2.4GHz radio system (Traxxas Bluetooth Link Module Compatible - Module sold separately), VXL-3s brushless power system, Extreme Heavy Duty Kit, and clipless pre-painted body.
Slash 4X4 VXL
Extreme Speed Meets Extreme Strength
Beneath Slash’s clipless body, the extreme Velineon brushless power system feeds power through the factory-installed Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability.
Extreme Heavy Duty Upgrade Kit
Slash 4X4 VXL’s factory-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Slash.
Clipless Body Mounting
Slash's innovative clipless body features secure mounting with quick and easy removal. No posts, no clips—just drop the body onto the chassis and snap it into place for a secure hold. When it’s time to change the battery, depress the tabs under the wheel wells and lift up to access the chassis in just seconds.
Class-Leading Brushless Power
Slash 4X4's Traxxas Velineon Brushless Power system defines a whole new generation of outrageous electric power. Pour in the voltage and out comes the speed in tidal waves of force harnessed by precise throttle control. For the uninitiated, prepare yourself... the sheer brutal power combined with the Slash 4X4's four-corner grip results in tire-melting acceleration and lightning fast speed. The Velineon 3s components work together as an optimized package, from the patented Traxxas High-Current connector to the custom-wound motor. It delivers the ultimate in efficiency, speed, and run-time along with refined control. It's brushless performance the Traxxas way: wicked fast and easy to use. Just plug it in and it works, no special knowledge or programming skills required!
Features
- Clipless ProGraphix Painted Body
- Pre-painted body with applied decals
- Scale dimensions and looks of actual short course race trucks
- Chassis nerf bars absorb impact and support the body
- Scale front and rear tube-style bumpers
- Extreme Heavy Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, steering blocks, and shock towers
- Maxx duty driveshafts
- Oversize diameter
- 6 mm axles
- Steel wheel hexes
- VXL-3s Waterproof Electronic Speed Control
- Three programmable drive profiles:
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Large heat sink
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-9 cells (7.2 to 10.8 volts)
- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
- Velineon Brushless Motor
- Ultra high-temperature sintered Neodymium magnets
- Optimized for power and efficiency in 1/10th scale vehicles
- Low-maintenance, unique Traxxas design
- Efficient, high-speed ball bearings
- Precision-balanced rotor
- 3500kV
- Brilliant blue-anodized finish
- Traxxas Stability Management (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Maintains steering composure to allow throttle-on powerslides
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- TQi 2.4 GHz High Output Radio System
- TQi 2-channel transmitter
- 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Compatible with optional TQi Traxxas Link Wireless Module (6511) to access full Traxxas Link app functionality (sold separately)
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
- Programmable multi-function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- Patented waterproof receiver box
- Tough Fiber-Composite Modular Chassis
- Modular chassis makes maintenance quick and easy
- Long 12.75″ wheelbase for increased stability
- Easy motor access with single-screw motor plate attachment
- All electronics securely fastened to chassis
- Easy Access Battery Compartment
- Adjustable battery hold down
- Accepts 6- and 7-cell flat packs and 7-cell and 8-cell hump packs
- Accepts many 2s and 3s LiPo battery configurations
- Transmission and Driveline
- Full-time shaft-driven 4WD
- Blue-anodized aluminum center driveshaft
- Heavy-duty slipper clutch & large 32-pitch gears
- Sealed, silicone-filled differentials with steel gears
- Steering
- Digital high-torque 2075 waterproof steering servo
- Dual bellcrank steering system with integrated servo saver
- Suspension
- Heavy-duty composite suspension arms
- Adjustable steel turnbuckles
- Captured rod ends won't pop off
- Springs and Shocks
- Fully adjustable oil-filled Ultra Shocks with X-ring technology
- Race-tuned progressive rate white powder-coated springs
- Wheels and Tires
- Pre-glued BFGoodrich Mud Terrain T/A tires with performance foam inserts
- 2″ outer diameter, 3″ inner diameter dual-profile SCT wheels
- Rubber-Sealed Ball Bearings
- Precision Hex Hardware
- Backed by Unparalleled Traxxas Parts Availability50
Specifications
Model Skill Level: 2
Scale: 1/10
Weight: 5.82 pounds (2.64 kg)
Length: 22.36 inches (568 mm)
Width: 11.65 inches (296 mm)
Front Track: 11.65 inches (296 mm)
Rear Track: 11.65 inches (296 mm)
Height: 7.60 inches (193 mm)
Wheelbase: 12.75 inches (324 mm)
Center Ground Clearance: 2.83 inches (72 mm)
Drivetrain: Shaft-driven 4WD
Differential Type: Hardened steel bevel, sealed, limited slip
Gear Ratio (Internal): 11.82:1
Gear Pitch: 32 pitch
Radio System: TQi 2.4 GHz 2-channel transmitter with TSM receiver
Servo(s): 2075 digital high-torque waterproof
Motor Name: Velineon 3500
Motor Type: Sensorless brushless
Motor Weight: 9.24 ounces (262 g)
Motor Length: 3.03 inches (77 mm) overall length, 2.2 inches (56 mm) can length
ESC Name: VXL-3s electronic speed control
ESC Type: Brushless
ESC Case Size: 1.54 inches (39 mm) / 2.18 inches (55 mm) / 1.30 inches (33 mm)
ESC Weight: 3.17 ounces (90 g)
Motor Connectors: 3.5 mm bullet
Battery Compartment Specs: 165 mm X 50 mm X 23 mm / 25 mm
Model Speed*: 60+ mph with optional gearing and 3s LiPo battery (items sold separately)
*With optional gearing and 3s LiPo battery (items sold separately)
**Battery expansion kit available
Requires
(4) AA batteries for transmitter | This is the Traxxas Slash Modified 1/10 Ready-To-Race 2WD Dirt Oval Race Truck with Waterproof Electronics, TQ 2.4 GHz 2-Channel Radio System, BL-2s Brushless Power System, and Clipless Painted Body.
This Combo Includes: Traxxas Slash Modified Brushless Racing Truck EZ-Peak ID LiPo Charger 7.4V 2S 5200mAh HardCase LiPo Battery
Competition Ready
The Slash Modified dirt oval racer is engineered to deliver competition-tuned track performance right out of the box. Slash’s already legendary durability has been enhanced with new Extreme Heavy Duty suspension components and performance upgrades such as aluminum GTR shocks, Magnum 272R transmission, tough clipless body, and the fast and reliable BL-2s brushless power system.
BL-2s Brushless Power System
The BL-2s brushless power system delivers more speed, quicker acceleration, and a more responsive throttle. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Slash Modified to run battery after battery for all-day race sessions. With no brushes to wear out, the BL-2s 3300 Kv motor can last the entire racing season with minimal maintenance.
Extreme Heavy Duty Components
Extreme Heavy Duty components come factory-installed on Slash Modified for game-changing durability. Key drivetrain and suspension components are beefed-up with extra material for ultimate strength. From HD suspension arms to the upgraded axles, Slash Modified gets you to the finish line no matter how rough the racing action gets.
Pro Series Magnum 272R Transmission
The Magnum 272R transmission maximizes racing performance and durability for hard-hitting torque of brushless power systems. The 272R features an aluminum motor plate, all-metal gears, and a sealed silicone-filled 4-gear differential. The low-CG design concentrates weight as low as possible over the rear axle for improved traction and handling.
Clipless Race Body
Slash Modified comes Ready-To-Race with a clipless body that requires no assembly and exceeds even the best custom designs. A heavily reinforced internal cage utilizes robust top and side bracing to ward off crash damage and protect the rear tires. Traxxas clipless technology holds the body firmly in place from start to finish with quick and easy removal on the pit bench.
Replica Hoosier Tires
Replica Hoosier Angle Block tires come mounted to graphite gray “steelie” wheels for an authentic race-prepped look. The tires are molded in a special rubber compound that balances durability and traction for consistent performance lap after lap. The large tread block design utilizes aggressive siping for maximum grip and predictable handling at the limit.
Aluminum GTR Shocks
GTR shocks represent the peak of racing technology. The color-matched PTFE-coated aluminum shock bodies hold over 70% more oil than Ultra Shocks and their slick titanium-nitride coated shafts resist scuffing, increase durability, and eliminate “stiction.” X-ring seals keep oil in and dirt out for smooth, consistent damping, and plush suspension action. Spring preload and ride height changes are as simple as turning the threaded collars.
Features
- Clipless Race Body
- Tough front and rear tube-style bumpers
- Body reinforcements to prevent pull-through damage
- Roll cage with molded driver figure
- Holds tight for intense action
- Quick and easy removal
- Smooth appearance with no body posts or clips
- Full-width molded rear wing
- Extreme Heavy Duty Upgrade Parts Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Extreme heavy duty driveshafts
- BL-2s Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan (3340)
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
- LiPo battery packs: 2 cells (7.4 volts)
- 3300 Kv Brushless Motor
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 Kv
- TQ 2.4 GHz Transmitter
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- Magnum 272R Transmission
- Heavy duty low-CG case
- Thick 3.2 mm aluminum motor plate
- Case supported bearings
- Fixed gear mesh
- High-strength steel gears
- Sealed bevel-gear differential
- Easy differential access
- Steering
- Chassis-mounted 2075 servo
- Dual bellcrank design with integrated servo saver
- Low-CG Chassis
- Modular composite tub design
- Secure battery hold-down
- Side nerf bars for impact resistance
- Suspension
- Heavy duty suspension arms
- 4 mm adjustable steel turnbuckles
- Captured links won’t pop off
- Aluminum PTFE-coated GTR Shocks
- Titanium nitride coated shafts
- 70% more oil capacity than standard Ultra Shocks
- Threaded bodies with adjustable spring collars
- Drivetrain
- Extreme Heavy Duty driveshafts
- Torque Control slipper clutch
- Wheels and Tires
- Graphite gray "steelie" dirt oval wheels
- 2.2″ outer diameter, 3″ inner diameter
- Licensed Hoosier Angle Block racing tires
- Wide tread blocks for consistent and predictable performance
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Built Slash Tough
When it comes to RC racing, Slash Modified stands alone at the pinnacle of performance and durability. Rugged fenders and nerf bars protect the rear wheels for realistic fender-to-fender racing action with strong roof reinforcements for rollover protection. Thick front and rear tube bumpers protect Slash Modified from impacts on and off the track.
Realistic Oval-Track Body
Slash Modified is Ready-To-Race right out of the box with fully formed Midwest Modified-style dirt oval body. A realistic roll cage surrounds the driver figure and supports the roof in case of rollovers. Rugged tube-style bumpers protect the front and rear against racing incidents and an adjustable molded rear wing provides both downforce and additional full-width body support.
Extreme Heavy Duty Driveshafts
Slash Modified uses high-performance telescoping driveshafts designed for increased strength and articulation. Traxxas U-joint driveshafts allow for maximum suspension movement resulting in longer travel and tighter turning.
Low-CG Chassis
An innovative low-CG chassis positions weight down low for aggressive handling. A wide track and long wheelbase keep Slash Modified planted in the turns to provide the perfect balance of stability and quick responses.
Waterproof Receiver Box
A sealed receiver box gives you the freedom to practice your racing skills regardless of the weather. The antenna and servo wires route neatly through a patented watertight seal. A blue O-ring seals the receiver box to protect the receiver from water.
3-Channel Receiver with Fail-Safe Security
In the event of signal loss due to an accidental transmitter switch-off or depleted batteries, the receiver automatically returns the throttle to neutral and holds the last commanded steering position. The fail-safe programming is conveniently built-in and does not need to be activated.
High Torque Steering Servo
A race truck needs a powerful steering servo for responsive performance. The waterproof steering servo (2075) uses O-ring seals to keep the fun going when things get wet. The Traxxas digital high-torque servo provides precise steering authority and speed for wheel-to-wheel racing at the track.
Torque Control Slipper Clutch
Semi-metallic pads and finned aluminum alloy pressure plates dissipate heat and provide consistent traction. The semi-metallic friction material remains stable across a wide temperature range to provide smooth, linear engagement. Spur gears can be removed and replaced without altering the slipper adjustment.
All-Metal Internal Gears
Slash Modified's race-ready Magnum 272R transmission is built for massive torque with high-strength steel input, idler, and differential gears and large-diameter bearings. The input gear is keyed and press fit onto the top shaft for greater precision and strength than a pin-mounted gear.
Specifications
Length: 25.8 inches (656 mm)
Front Track:,12.3 inches (313 mm)
Rear Track: 12.3 inches (313 mm)
Ground Clearance: 1.38 inches (35 mm)
Weight (no battery): 5.62 pounds (2.55 kg)
Height (overall): 8.52 inches (216 mm)
Wheelbase: 13.1 inches (333 mm)
Shock Length (front): 3.45 inches (88 mm) - Long
Shock Length (rear): 3.98 inches (101 mm) - XX-Long
Tires: Licensed Hoosier Angle Block racing tires
Tire Diameter: 4.3 inches (109 mm)
Wheels (front/rear): Graphite gray "steelie" wheels
Wheel Diameter: 2.2 inches (56 mm) (outer)
3.0 inches (76 mm) (inner)
Speed Control: BL-2s electronic speed control
Motor (electric): BL-2s 3300 Kv sensorless brushless
Overall Drive Ratio: 9.10:1
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch: 48
Chassis Structure/Material: Composite tub
Drive System: 2WD
Steering: Dual-bellcrank with integrated servo saver
Radio System: TQ 2.4 GHz (2-channel)
Servo: Waterproof digital 2075 servo (125 oz-in torque)
Skill Level: 1
Battery Compartment (L/W/H): 165 mm (6.49″) x 50 mm (1.95″) x 23/25 mm (1.02″/0.90″)
Requires
(4) AA Batteries for transmitter
| This is the Traxxas Rustler XL-5 Ready-to-Run 1/10 Scale Electric Stadium Truck with the ID Battery and USB-C charger. The truck comes with the 3000mAh 7-Cell 8.4V flat battery pack with ID connector, 4-Amp USB-C fast charger, and waterproof electronics on the truck. These are great trucks for people new to R/C, and they are a great way for kids to get involved. This is one of the best beginner trucks we have and they are an unbelievable value. These make an excellent gift!
Traxxas Rustler XL-5
High Performance Stadium Truck
Traxxas Rustler sits low and wide for maximum high-speed stability, with fast reflexes and an agile feel not found on other trucks. New factory-installed heavy duty suspension components allow Rustler to push the performance envelope to the extreme with next-level durability. Rustler delivers power-sliding, full-throttle fun and a blistering 35+ MPH top speed in a Ready-to-Race package backed by Traxxas’ legendary innovation.
Traxxas Rustler XL-5 Now Includes
Extreme HD Components
Rustler delivers game-changing durability with its factory-installed Extreme Heavy Duty suspension components. Key components have been redesigned and beefed-up with extra material to ensure Rustler takes even the most brutal punishment in stride. From full-send sessions at the skate park to backyard bashing, no stadium truck delivers more thills than Rustler.
Clipless Body Mounting
Rustler's clipless body holds firm no matter how rough the action gets. Heavy duty latches grip the body tightly, but release in just seconds for fast battery swaps. This convenient hidden latching system replaces traditional body clips with reinforced panels to maintain body integrity and resist pull-through damage.
Features
- Clipless Stadium Truck Body
- Pre-painted body with applied decals
- Aggressive, aerodynamic body with rear wing
- Body reinforcements to prevent pull-through damage
- Holds tight for intense action
- Quick and easy removal
- Smooth appearance with no body posts or clips
- High-Performance Waterproof XL-5 Electronic Speed Control
- Innovative waterproof design
- Three drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode - 50% forward / brake / 50% reverse (patented)
- Traxxas EZ-Set one-button setup
- LiPo and NiMH compatible with two-stage low-voltage detection
- Titan 550 Motor
- Powerful Titan 12T 550 brushed motor with internal cooling fan
- Oversized armature for big torque and increased power handling
- Virtually maintenance-free operation
- Extreme Heavy Duty Parts Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- HD suspension arms
- TQ 2.4 GHz 2-Channel Radio System
- Ergonomic transmitter with internal antenna
- Traxxas 6519 3-channel micro receiver with fail-safe security
- Sealed watertight receiver box keeps the receiver dry
- Includes Battery and USB-C Charger
- 4-amp USB-C fast charger
- 3000 mAh Traxxas 7-cell 8.4 V NiMH battery with iD
- Easy Access Battery Compartment
- Accepts NiMH 6 and 7-cell flat packs and hump packs
- Accepts 2-cell LiPo batteries
- Transmission and Driveline
- Brushless-ready Magnum 272 metal-gear transmission
- Torque-Control slipper clutch system
- Planetary gear differential with steel ring gear
- Sealed gearbox protects the transmission with beefed up motor guard
- External gear cover with easy clutch access
- Heavy-duty telescoping U-joint driveshafts and yokes
- Tough Fiber-Composite Monocoque Chassis
- Wide, low-profile design for increased stabilit
- Steering
- High-torque waterproof Traxxas 2056 steering servo
- Spring-loaded servo saver helps protect against impacts
- Suspension
- Durable solid camber links eliminate the need for adjustment
- Captured rod ends won't pop off
- Springs and Shocks
- Fully adjustable oil-filled Ultra Shocks with X-ring technology
- White powder-coated springs
- Wheels and Tires
- Pre-glued Alias step-pin rear tires and ribbed front tires with performance foam inserts
- 2.8″ black six-spoke wheels with chrome beadlock trim
- Precision Hex Hardware
Modified Muscle
The Titan 12T 550 motor pumps out incredible power with an integrated cooling fan to keep temperatures down. The XL-5 Electronic Speed Control provides smooth, reliable power delivery with EZ-Set one-button setup and three different drive profiles.
Battery and Charger Included
Rustler includes a powerful 8.4 volt 3000 mAh Traxxas Power Cell rechargeable NiMH battery pack to reach its 35+ mph top speed. Fast 4-amp charging is available virtually anywhere thanks to the included 45+ watt USB-C battery charger with iD technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time.
Specifications
Length: 18.1 inches (445 mm)
Front Track: 12.25 inches (311 mm)
Rear Track: 12.25 inches (311 mm)
Weight: 59.6 ounces (1.69 kg)
Height (overall): 7 inches (178 mm)
Wheelbase: 11.4 inches (289 mm)
Front Shock Length: Long
Rear Shock Length: XX-long
Front Tires (pre-glued):Alias ribbed 2.8″
Rear Tires (pre-glued): Alias Step-Pin 2.8″
Front Wheels: 2.8″ Black and chrome 6-spoke
Rear Wheels: 2.8″ Black and chrome 6-spoke
Electronic Speed Control:XL-5 electronic speed control
Motor (electric): Titan 12-turn 550
Steering Servo: 2056 high torque waterproof
Transmitter: TQ 2.4 GHz radio
Receiver: 6519 TQ 3-channel
Gear Ratio (internal): 2.72 (final drive: 10.17)
Differential Type: Planetary
Gear Pitch: 48 pitch
Transmission: Magnum 272
Steering: Bellcrank
Chassis Type: Modified tub
Chassis Material: Composite Nylon
Top-Speed: 35+ mph**
Skill Level: 1
*Battery Tray Dimensions: 166 mm x 48 mm x 28 mm
Included Charger: Traxxas 4-amp USB-C fast charger
Included Batteries: Traxxas Power Cell 3000 mAh, 8.4 V, NiMH battery with iD
*Battery expansion kit available (3725X)
**With 7-cell battery and included optional 28-tooth pinion gear
Requires
(4) AA Batteries for Transmitter
USB-C Charging Cable and Block | INCLUDED FREE ITEMS TRA2827X - 3000mAh 7.4v 2-CELL LIPO BATTERY TRA2920 - USB-C 2s LIPO iD CHARGER
This is the Traxxas Ford F-150 Raptor BL-2S 2WD Ready-to-Race Truck. The Slash Raptor comes fully-assembled with waterproof electronics, TQ 2.4 GHz 2-channel radio system, BL-2s brushless power system, and clipless painted body. Battery and charger are sold separately.
FORD F-150 RAPTOR STYLING
AWARD-WINNING SLASH PERFORMANCE
Based on the award-winning Slash, the Traxxas Ford F-150 Raptor combines show-stopping looks with legendary Slash toughness. Now Raptor comes standard with the BL-2s brushless power system for a more responsive throttle, powerful acceleration, and all-day fun. Raptor comes fortified with Traxxas’ Extreme Heavy Duty components to take even the most brutal punishment in stride.
BL-2S BRUSHLESS POWER SYSTEM
Raptor’s waterproof BL-2s brushless power system ramps up the fun with more torque, faster acceleration, and less maintenance than comparable brushed power systems. The BL-2s is a model of efficiency and refinement, offering more power than before with the safety and convenience that only Traxxas can deliver.
EXTREME HEAVY DUTY COMPONENTS
Extreme Heavy Duty components come factory-installed on Raptor for game-changing durability. Key drivetrain and suspension components are beefed-up with extra material for unbeatable strength. From HD suspension arms to upgraded driveshafts, Raptor sets a new standard for durability for your off-road adventures.
CLIPLESS FORD F-150 RAPTOR BODY
Raptor’s sleek clipless body comes fully detailed with an injection molded grille, front bumper, and body accessories to capture the full depth and detail of Ford’s original design. Raptor’s hidden latching system maximizes convenience and scale realism by removing traditional body clips which would interrupt the body’s clean lines.
Features
- Licensed Ford F-150 Raptor Clipless Body
- Injection molded grille, side mirrors, and hood vent
- Chassis nerf bars absorb impact and support the body
- Tough front and rear replica bumpers
- Holds tight for intense action
- Body reinforcements to prevent pull-through damage
- Holds tight for intense action
- Quick and easy removal
- Extreme Heavy Duty Upgrade Components
- Strengthened C-hubs, axle carriers, and steering blocks
- Extreme heavy duty driveshafts
- BL-2s Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan (3340)
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
- LiPo battery packs: 2 cells (7.4 volts)
- 3300 kV Brushless Motor
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 kV
- TQ 2.4 GHz Transmitter
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- Tough Fiber-Composite Monocoque Chassis
- Long 13.2″ wheelbase for increased stability
- Over 3.5″ of ground clearance
- Easy Access Battery Compartment
- Adjustable battery hold down
- Accepts 6- and 7-cell flat packs and 7-cell hump packs
- Accepts many 2s LiPo battery configurations
- Suspension
- Heavy-duty suspension arms
- Adjustable steel turnbuckles
- Oil-filled Ultra Shocks
- White powder-coated springs
- Steering
- Chassis-mounted 2075 servo
- High-performance bellcrank system minimizes bump steer
- Transmission
- Velineon-ready Magnum 272 metal-gear transmission
- Planetary gear differential with steel ring gear
- Sealed gearbox protects the transmission
- External gear cover with easy clutch access
- Drivetrain
- Extreme heavy-duty driveshafts
- Torque Control slipper clutch
- Wheels and Tires
- Split-Spoke SCT wheels
- 2.2″ outer diameter, 3″ inner diameter
- Replica BFGoodrich Mud Terrain T/A Tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Specifications
Length: 22.36 inches (568 mm)
Front Track: 11.65 inches (296 mm)
Rear Track: 11.65 inches (296 mm)
Center Ground Clearance: 3.5 inches (89 mm)
Weight (no battery): 4.76 pounds (2.16 kg)
Height (overall): 8.43 inches (214 mm)
Wheelbase: 13.2 inches (335 mm)
Shock Length (front): 3.45 inches (88 mm) - Long
Shock Length (rear): 3.98 inches (101 mm) - XX-Long
Tires: Replica BFGoodrich Mud Terrain T/A Tires
Tire Diameter: 4.3″ x 1.7″ inches (109 mm x 43 mm)
Wheels (front/rear): Split-Spoke SCT wheels
Wheel Diameter: 2.2 inches (56 mm) (outer)
3.0 inches (76 mm) (inner)
Speed Control: BL-2s electronic speed control
Motor (electric): BL-2s 3300 kV sensorless brushless
Overall Drive Ratio: 12.58:1
Differential Type: Planetary
Gear Pitch: 48
Chassis Structure/Material: Composite tub
Drive System: 2WD
Steering: Dual-bellcrank with integrated servo saver
Radio System: TQ 2.4 GHz (2-channel)
Servo: Waterproof digital 2075 servo (125 oz-in torque)
Skill Level: 1
Battery Compartment (L/W/H): 165 mm (6.49″) x 50 mm (1.95″) x 23/25 mm (1.02″/0.90″)
Requires
(4) AA Batteries for Transmitter
USB-C Charging Cable and Block**
**TRA #2920 - Full charging output requires a 45 watt or greater power supply like the Traxxas 2912 and high-quality USB-C cable like the Traxxas 2916. | This is the Traxxas Maxx Slash with dual LiPo batteries & EZ-Peak Dual ID charger included! Out of the box, this setup will be ready for up to 70+MPH speeds* and the ultimate bashing versatility.
The Traxxas Maxx Slash 6S 4WD Brushless Short Course Truck. Fully assembled, Ready-To-Race, with TQi 2.4GHz radio system, Traxxas Stability Management (TSM), VXL-6s brushless power system, and ProGraphix clipless body.
SHORT COURSE SUPREMACY
Traxxas rocked the world 15 years ago with the release of the Slash, launching a short course revolution and a generation of enthusiasts that have propelled Slash to become the best-selling truck in RC. Now, Slash is going even bigger. Traxxas MAXXed the Power, Size, Durability, and Excitement!
6s Power
Maxx Slash punches harder and faster with brutal 6s power and 70+mph speed. Low center of gravity and new belted tires keep it all in control.
Maxx-Sized Slash
Being big is good. Being the perfect size for maximum performance is best. Maxx Slash is the perfect size to power aggressively over the roughest terrain imaginable, yet it is still feels light, responsive, and agile.
Maxx Strength
The Maxx platform has already proven it’s synonymous with durability. The engineering on Maxx Slash continues to innovate, adding even more strength for critical 6s power handling and faster, harder-hitting action.
Belted Tires
Maxx SC belted tires limit high-speed tire expansion for a larger, flatter contact patch and game-changing precision and control. Tire uniformity is critical for stability, especially at the top of its 70+mph speed range.
Features
- VXL-6s Waterproof Electronic Speed Control
- 6s LiPo compatible
- Integrated cooling fan
- Real-time telemetry via Traxxas Link
- 3-LED status indicators
- Powered accessory ports
- 10-gauge silicone wire
- Patented Traxxas High-Current Connectors
- Velineon 2000 kV Brushless Motor
- 4-pole 2000 kV brushless motor
- 5 mm output shaft
- Finned can for better heat dissipation
- Integrated motor cradle mount
- Supports entire motor
- Reduces flex for longer gear life
- TQi 2.4GHz High Output Radio System
- TQi 2.4 GHz transmitter
- TQi 2.4 GHz 5-channel micro receiver (#6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Multi-function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- Clipless Body
- Quick and secure installation and removal
- Managed airflow for improved high-speed stability
- Rigid internal frame
- Additional nerf bar side support
- Eliminates body posts and clips
- Molded body reinforcements for tear-through protection
- Drivetrain
- Torque-Biasing Center Drive
- Absorbs shocks and distributes power
- Aluminum housing
- Full-time shaft-driven 4-wheel drive
- 17 mm keyed wheel hex with 5 mm nut
- Sealed, silicone fluid-filled diffs with large module ring and pinion gears
- Steel pinion and spur gear
- Heavy-duty Cush Drive
- Steel-Core hybrid telescoping driveshafts
- Splined aluminum center driveshaft
- Easy Battery Access
- Large battery compartment with secure snap-lock battery door
- Accepts single 6700 mAh 4-cell LiPo battery or dual 5000 mAh 3s LiPo batteries
- Batteries are protected deep in the chassis
- More secure than conventional retention systems
- Heavy-Duty Steering Bellcranks and Servo
- Large-scale high-output steering servo
- 285 oz-in of torque
- 0.18 sec transit speed
- Triangulated mounting system to fully support case
- Heavy-duty double-shear bellcranks
- Suspension
- Heavy duty double-shear suspension arms
- Tough composite formula resists impact damage, even in cold weather
- Engineered to optimize suspension travel and steering angles
- All critical suspension points have double shear strength
- Steel pivot balls
- C-hub and steering block geometry maximizes steering angle
- Fixed, high-strength camber and toe links
- Steel upper and lower tie bars
- 70+mph with optional gearing and dual 3s LiPo batteries (sold separately)
- Traxxas Stability Management (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- Modular Low-CG Composite Chassis
- Extended modular chassis design interlocks with front and rear bulkheads
- Absorbs and distributes impact energy
- Molded-in hex reinforcements on flat surfaces
- Easy to service and access components
- Driveline is sealed in the chassis to keep out dirt and grit
- GT-Maxx Shocks
- Machined aluminum threaded body
- Extra-large bore and capacity
- Large-diameter damper shaft
- Lower seal cartridge with dual X-rings
- Adjustable upper spring retainer
- Plastic shock caps with pivot balls
- Lower spring perches bolted on
- Bumpers
- Heavy duty energy absorbing front and rear bumpers
- Lower front and rear skids for impact and abrasion resistance
- Integrated nerf bars for side impact resistance
- Adjustable wheelie bar with integrated carry handle
- Wheels and Tires
- Tough dual-profile wheels with keyed 17 mm hex receptor
- Large 5.3″ Maxx SC belted tires
- Limits tire expansion for game-changing performance
- 1-piece foam inserts
- Pre-glued and ready for action
Engineered for 6s Power
From its inception, Traxxas engineered Maxx Slash to incorporate all the hallmarks of the legendary Slash, but infused with massive 6s power. Belted Maxx SC tires amplify the short course experience with incredible traction and 70+mph stability. An all-metal drivetrain and Steel-Core hybrid driveshafts give Maxx Slash all the Traxxas-Tough durability that made Slash famous.
Aggressive Short Course Body
Maxx Slash retains the unmistakable short course body style of its Slash lineage but injects it with a healthy dose of high-horsepower adrenaline. Wide fenders and sculpted lines give Maxx Slash a more aggressive look while rugged body reinforcements keep it looking fresh after a rough day at the track.
Adjustable Wheelie Bar
With the hard-hitting punch of 6s power on hand, an adjustable wheelie bar is required. Maxx Slash's adjustable wheelie bar maximizes traction and control during full throttle acceleration. Set it low to prevent lift during full throttle acceleration on hard surfaces, or set it higher to serve as a transparent backstop during high-speed, high-flying off-road action.
Waterproof Electronics
Maxx Slash is not limited by mud, snow, or water and neither is your fun. A sealed box protects the TQi receiver from water for all-weather driving. An easy-access port on top allows instant access to the receiver while retaining the box’s waterproof integrity.
Maxx Steering Servo
The powerful steering servo mounts solidly to the Maxx Slash chassis for enhanced support and impact resistance. With its proven durability in MAXX monster trucks, the digital, ball bearing design delivers 285 oz-in of torque for responsive and precise steering control.
Optional Accessory Lighting
Built to handle brutal real-world punishment, the Maxx Slash LED Light Kit (part #10290) is waterproof and built Traxxas Tough for maximum fun. Blaze a path through the night with this high-output LED light kit. The included high voltage amplifier packs the muscle to efficiently power the high-power light bar with a tightly regulated output for stable lighting performance, without flickering or dimming as the battery voltage changes.
Heavy Duty Bumpers
Heavy-duty front and rear Slash-style bumpers help protect critical components from impacts. The bumpers, combined with a short course body that covers the tires, allow for fender-to-fender contact for competitive and authentic racing action.
Shock Tower Design
Maxx Slash's integrated shock towers are part of the chassis and produce a rigid, triangulated structure to mount and protect the shock caps. Heavy-duty body mounts secure directly to the reinforced shock towers for maximum strength and impact resistance.
Fixed Mesh Motor Cradle
The motor and cradle join together to form a fixed gear mesh. A heavily reinforced mounting plate in the chassis keeps the motor and spur gear in perfect alignment. This innovative solution eliminates flex and greatly extends gear life.
Low-CG Chassis
The new chassis lowers the center of gravity and extends the wheelbase for responsive handling. A fighter jet aesthetic wraps around an engineered truss design that builds in strength and rigidity where it's needed most. Proven-tough Maxx bulkheads are tightly integrated front and rear.
Torque-Biasing Center Drive
Maxx Slash's Torque-Biasing Center Drive is tuned for maximum punch off the line with heavyweight oil for even front/rear power distribution. A heavy-duty aluminum housing helps dissipate heat for consistent performance as Maxx Slash delivers unmatched throttle punch and unbelievably quick acceleration!
Specifications
Length: 26.52 inches (674 mm)
Front Track: 14.30 inches (363 mm)
Rear Track: 14.30 inches (363 mm)
Ground Clearance: 1.54 inches (39 mm)
Weight (no battery): 11.78 pounds (5.34 kg)
Height (overall): 9.64 inches (245 mm)
Wheelbase: 15.49 inches (394 mm)
Shock Length (front): 4.90 inches (124 mm)
Shock Length (rear): 4.90 inches (124 mm)
Tire Diameter: 5.27 inches (134 mm)
Wheel Diameter: 2.2 x 3.2 inches (56 x 81 mm)
Speed Control: Velineon VXL-6s
Motor (electric): Velineon 2000 kV Brushless
Overall Drive Ratio: 11.38:1 (25/50 motor pinion and spur gear)
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch: Module 1.0
Chassis Structure/Material: Hex-reinforced nylon composite
Brake Type: Electronic
Drive System: Shaft-driven 4WD
Steering: Double-shear bellcrank
Wheels & Tires: Dual-profile SCT wheels with Maxx SC belted tires & foam inserts
Radio System: 2-Channel, TQi 2.4 GHz Transmitter with TSM receiver
Servo: 2090 Waterproof (285 oz-in torque)
Top Speed: 70+mph with two 3s LiPo batteries and optional gearing (sold separately)
Skill Level: 4
Battery Tray: (L/W/H): 181 x 56 x 45 mm
Requires
(4) AA alkaline batteries for the transmitter |
Rating & Review
There are no reviews yet.