Traxxas X-Maxx 8S 4WD with Belted Tires RTR Monster Truck Combo w/4S 6700mAh & Dual Charger

Original price was: £519.90.Current price is: £9.90.
139 people are viewing this right now
Estimated Delivery:
19 - 26 Oct, 2025
Trust Badge
Guaranteed safe & secure checkout

Description

This is the Traxxas X-Maxx 4WD 8S Brushless Ready-to-Race Monster Truck COMBO with TWO 4S 6700mAh batteries and the EZ-Peak Live ID DUAL OUTPUT quick charger.

The new 8S X-Maxx has been beefed up with Belted Sledgehammer Off-Road Tires, Overdrive Gear Set, 15/54 Stock Gearing and Included 17/46 Speed Gearing.

Get Ready to Experience the Most Powerful Ready-To-Race Monster Truck on the Planet!
Unrelenting 4X4 power, mammoth size, and award-winning innovation make X-Maxx the ultimate monster truck. With 30+ volts of extreme 8s power, X-Maxx defies physics, unleashing jaw-dropping acceleration and 50+ mph speeds. Engineered to conquer the most extreme terrain and take brutal real-world punishment in stride, X-Maxx is the definition of Traxxas Tough.

SIZE WINS
At the end of the day, size always wins. X-Maxx plows over obstacles and muscles through extreme terrain that leaves lesser trucks stranded. Mammoth 8-inch tall tires, long-arm suspension, and huge ground clearance dwarf the surroundings for virtually unstoppable monster truck fun.

EXTREME POWER
At Traxxas, too much power is never enough! The durability of the VXL-8s is matched only by the sheer ferocity of its 8s 30+ volt dual LiPo muscle. The speed-tuned 1200XL Big Block motor propels X-Maxx with brutal authority and exacting quickness that warps your senses. No matter what you have driven in the past, nothing will prepare you for X-Maxx.

BELTED SLEDGEHAMMER TIRES – ULTIMATE OFF-ROAD TRACTION
Proven Sledgehammer tread pattern provides maximum traction across a variety of surfaces. Traxxas belted tires resist ballooning to provide ultimate stability at high speeds from the mud to the pavement.

EXCLUSIVE SELF-RIGHTING
Before X-Maxx, monster trucks would sometimes roll over upside down, bringing the action to a screeching halt. Now, press a button and in most cases this exclusive patent-pending Traxxas innovation flips X-Maxx back over onto its wheels so that you can quickly get back to having fun.

TRAXXAS STABILITY MANAGEMENT
Traxxas Stability Management (TSM) allows you to experience all the extreme power, speed, and acceleration that was engineered into your Traxxas model by making it much easier to control the vehicle on common slippery surfaces such as loose dirt, smooth concrete, and even ice and snow. It can be dialed from completely off to 100%, and anywhere in between, right from the TQi transmitter!

MAXX-DUTY DRIVETRAIN
X-Maxx puts the power to the ground through tough all-steel drivetrain gears, the revolutionary Cush Drive system, and our strongest driveshafts ever. The Torque-Biasing Center Drive improves driveline durability and drives larger module ring and pinion gears on the toughest differentials we have ever produced.

Features

  • VXL-8s Waterproof Electronic Speed Control
    • 8s LiPo compatible
    • Built-in cooling fan
    • Real-time telemetry via Traxxas Link
    • Machined heat sinks
    • 10-gauge silicone wire
    • Integrated protection circuits
    • LED status lights
  • Velineon 1200XL Brushless Motor
    • “Big Block” brushless motor
    • 4-pole 1275 kV
    • 5 mm output shaft
    • Aluminum slip-on heat sink
    • Dual motor cooling fans
  • 50+ MPH with Two 4s LiPo Batteries and Included Optional Spur Gear
  • Traxxas Stability Management (TSM)
    • Helps prevents spinouts and loss of control
    • Adjusts from off to 100% assistance from the transmitter
  • TQi 2.4 GHz High Output Radio System
    • Traxxas Link enabled
    • 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
    • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
    • Multi-Function knob
    • Adjustable steering and throttle percentage (dual rates)
    • Adjustable steering and throttle sensitivity (exponential)
    • BEC Voltage and Motor Temperature Sensor installed
  • Clipless Body Mount System
    • Quick one-hand installation and removal
    • Uses pivoting rear latch mechanism
    • Eliminates body posts and clips
  • Drivetrain
    • Full-time shaft-driven 4-wheel drive
    • All-metal gears and CVDs
    • Overdrive gearing pre-installed
    • Torque-Biasing Center Drive absorbs shocks and distributes power
    • 24 mm splined wheel hexes
    • Wheel hexes retained with a clip
    • 17 mm hex on outside of wheel
    • Sealed, silicone fluid-filled diffs with large module ring and pinion gears
    • Splined outdrives attached with external thru-bolt method
    • Heavy-duty Cush Drive with steel spur gear
    • Fully machined aluminum stub axles
    • Splined aluminum center driveshaft
  • Heavy-Duty Fixed Motor Mount
    • Precision, preset gear mesh adjustments
    • No manual gear mesh adjustments are required
    • Motor retention separate from gear mesh
  • Heavy-Duty Modular Composite Chassis
    • Interlocking front and rear bulkheads
    • Motor mounts to rear bulkhead to eliminate gear crunching flex
    • Easy to service and access components
    • Driveline is sealed in the chassis to keep out dirt and grit
  • Clipless Battery Retention System
    • No body clips or hook and loop straps
    • Battery hold-downs pivot for easy access
    • Adjustable for battery size
    • More secure than conventional retention systems
    • Integrated into chassis top brace for improved battery tray and chassis stiffness
  • Bumpers
    • Front energy absorbing rubber impact bumper
    • Lower front and rear skids for impact and abrasion resistance
    • Integrated nerf bars for side impact resistance
  • Heavy-Duty Steering Bell Cranks and Servo Saver
    • High-output steering servo
    • Wired directly into the RX box, no external wires seen on chassis
    • New mounting system to fully support case
    • Double-shear, bearing supported servo horn
  • Suspension
    • Engineered to optimize suspension travel and steering angles
    • All critical suspension points have double shear strength
    • High strength steel suspension pins used throughout
    • Suspension pins retainers won’t come loose or “back-out”
    • 4 mm machined pivot balls
    • C-hub and steering block geometry maximizes steering angle
    • Adjustable roll center
    • Fixed, high-strength camber and toe links
    • Steel upper and lower tie bars
    • Full contact sealed bearings used in exposed locations
  • Large-Scale GTX Shocks
    • Machined aluminum threaded body
    • Extra-large bore and capacity
    • 5.2 mm damper shaft
    • Lower seal cartridge includes integrated wiper seal combination
    • Adjustable upper spring retainer
    • Plastic shock caps with pivot balls
    • Fixed shock locations
    • Lower spring perches bolted on
  • Wheels/Tires
    • Massive 8.4″ Sledgehammer belted tires
      • Virtually eliminates ballooning at high speeds
      • Open tread block design
      • 2-piece foam insert
      • High-strength glue and bead design
    • Large, dual-diameter wheels

Specifications
Weight: 19.1 pounds (8.66 kg)
Length: 30.67 inches (779 mm)
Width: 21.3 inches (540 mm)
Front Track: 21.3 inches (540 mm)
Rear Track: 21.3 inches (540 mm)
Height: 13.99 inches (355 mm)
Wheelbase: 18.92 inches (480 mm)
Center Ground Clearance: 4.2 inches (107 mm)
Drive System: Shaft-driven 4WD
Drivetrain: Shaft-driven 4WD
Transmission: Single speed
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch: 1.0 metric pitch
Servo(s): 2085X metal gear ultra-high-torque waterproof
Radio System: TQi 2.4 GHz 2-channel transmitter with wireless module
Battery Compartment Specs: 197 mm X 52 mm X 44 mm
Motor: Velineon 1200XL
Motor Type: 1275 kV sensorless brushless
Motor Weight: 23.44 ounces (665 g)
Motor Length: 4.32 inches (110 mm)
Motor Diameter: 1.88 inches (48 mm)
Motor Shaft Size: 5 mm
Motor Connector Type: 6.5 mm bullet connectors
ESC: Velineon VXL-8s
ESC Type: Brushless
ESC Case Size: 2.23 inches (58 mm) / 2.83 inches (72 mm) / 1.81 inches (46 mm)
ESC Weight: 7.60 ounces (215.5 g)
Motor Connectors: 6.5 mm bullet connectors
Battery Connectors: Traxxas High-Current Connectors
ESC Power Wire: 10 gauge Maxx Cable
Model Type: Monster Truck
Model Speed: 50+ mph with two 4s LiPo batteries and optional pinion gear
Model Skill Level: 6

Requires
(4) AA batteries for the transmitter

VideosHide Videos

Quick Comparison

Traxxas X-Maxx 8S 4WD with Belted Tires RTR Monster Truck Combo w/4S 6700mAh & Dual Charger removeTraxxas Sledge 6S 4WD with Belted Tires Brushless RTR Monster Truck w/6S LiPo & Dual Charger Combo removeTraxxas Ford Raptor Slash 2WD Brushless BL-2s RTR RC Truck & FREE LIPO BATTERY AND USB-C LIPO CHARGER removeTraxxas XRT 8S 4WD Brushless RTR Monster Truck Combo w/4S 6700mAh & Dual Charger removeTraxxas Stampede 4X4 Brushless BL-2s RTR Monster Truck w/2S LiPo COMBO removeTraxxas Slash 4x4 VXL Heavy Duty Brushless RTR Short Course RC Truck LiPo Combo remove
NameTraxxas X-Maxx 8S 4WD with Belted Tires RTR Monster Truck Combo w/4S 6700mAh & Dual Charger removeTraxxas Sledge 6S 4WD with Belted Tires Brushless RTR Monster Truck w/6S LiPo & Dual Charger Combo removeTraxxas Ford Raptor Slash 2WD Brushless BL-2s RTR RC Truck & FREE LIPO BATTERY AND USB-C LIPO CHARGER removeTraxxas XRT 8S 4WD Brushless RTR Monster Truck Combo w/4S 6700mAh & Dual Charger removeTraxxas Stampede 4X4 Brushless BL-2s RTR Monster Truck w/2S LiPo COMBO removeTraxxas Slash 4x4 VXL Heavy Duty Brushless RTR Short Course RC Truck LiPo Combo remove
ImageTraxxas X-Maxx 8S 4WD with Belted Tires RTR Monster Truck Combo w/4S 6700mAh & Dual ChargerTraxxas Sledge 6S 4WD with Belted Tires Brushless RTR Monster Truck w/6S LiPo & Dual Charger ComboTraxxas Ford Raptor Slash 2WD Brushless BL-2s RTR RC Truck & FREE LIPO BATTERY AND USB-C LIPO CHARGERTraxxas XRT 8S 4WD Brushless RTR Monster Truck Combo w/4S 6700mAh & Dual ChargerTraxxas Stampede 4X4 Brushless BL-2s RTR Monster Truck w/2S LiPo COMBOTraxxas Slash 4x4 VXL Heavy Duty Brushless RTR Short Course RC Truck LiPo Combo
SKU
Rating
Price
Original price was: £519.90.Current price is: £9.90.
Save 98%
Original price was: £769.90.Current price is: £15.90.
Save 98%
Original price was: £349.90.Current price is: £10.90.
Save 97%
Original price was: £419.90.Current price is: £9.90.
Save 98%
Original price was: £439.90.Current price is: £12.90.
Save 97%
Original price was: £509.90.Current price is: £10.90.
Save 98%
Stock
Availability
Add to cart

Description
ContentThis is the Traxxas X-Maxx 4WD 8S Brushless Ready-to-Race Monster Truck COMBO with TWO 4S 6700mAh batteries and the EZ-Peak Live ID DUAL OUTPUT quick charger. The new 8S X-Maxx has been beefed up with Belted Sledgehammer Off-Road Tires, Overdrive Gear Set, 15/54 Stock Gearing and Included 17/46 Speed Gearing. Get Ready to Experience the Most Powerful Ready-To-Race Monster Truck on the Planet! Unrelenting 4X4 power, mammoth size, and award-winning innovation make X-Maxx the ultimate monster truck. With 30+ volts of extreme 8s power, X-Maxx defies physics, unleashing jaw-dropping acceleration and 50+ mph speeds. Engineered to conquer the most extreme terrain and take brutal real-world punishment in stride, X-Maxx is the definition of Traxxas Tough. SIZE WINS At the end of the day, size always wins. X-Maxx plows over obstacles and muscles through extreme terrain that leaves lesser trucks stranded. Mammoth 8-inch tall tires, long-arm suspension, and huge ground clearance dwarf the surroundings for virtually unstoppable monster truck fun. EXTREME POWER At Traxxas, too much power is never enough! The durability of the VXL-8s is matched only by the sheer ferocity of its 8s 30+ volt dual LiPo muscle. The speed-tuned 1200XL Big Block motor propels X-Maxx with brutal authority and exacting quickness that warps your senses. No matter what you have driven in the past, nothing will prepare you for X-Maxx. BELTED SLEDGEHAMMER TIRES - ULTIMATE OFF-ROAD TRACTION Proven Sledgehammer tread pattern provides maximum traction across a variety of surfaces. Traxxas belted tires resist ballooning to provide ultimate stability at high speeds from the mud to the pavement. EXCLUSIVE SELF-RIGHTING Before X-Maxx, monster trucks would sometimes roll over upside down, bringing the action to a screeching halt. Now, press a button and in most cases this exclusive patent-pending Traxxas innovation flips X-Maxx back over onto its wheels so that you can quickly get back to having fun. TRAXXAS STABILITY MANAGEMENT Traxxas Stability Management (TSM) allows you to experience all the extreme power, speed, and acceleration that was engineered into your Traxxas model by making it much easier to control the vehicle on common slippery surfaces such as loose dirt, smooth concrete, and even ice and snow. It can be dialed from completely off to 100%, and anywhere in between, right from the TQi transmitter! MAXX-DUTY DRIVETRAIN X-Maxx puts the power to the ground through tough all-steel drivetrain gears, the revolutionary Cush Drive system, and our strongest driveshafts ever. The Torque-Biasing Center Drive improves driveline durability and drives larger module ring and pinion gears on the toughest differentials we have ever produced. Features
  • VXL-8s Waterproof Electronic Speed Control
    • 8s LiPo compatible
    • Built-in cooling fan
    • Real-time telemetry via Traxxas Link
    • Machined heat sinks
    • 10-gauge silicone wire
    • Integrated protection circuits
    • LED status lights
  • Velineon 1200XL Brushless Motor
    • “Big Block” brushless motor
    • 4-pole 1275 kV
    • 5 mm output shaft
    • Aluminum slip-on heat sink
    • Dual motor cooling fans
  • 50+ MPH with Two 4s LiPo Batteries and Included Optional Spur Gear
  • Traxxas Stability Management (TSM)
    • Helps prevents spinouts and loss of control
    • Adjusts from off to 100% assistance from the transmitter
  • TQi 2.4 GHz High Output Radio System
    • Traxxas Link enabled
    • 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
    • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
    • Multi-Function knob
    • Adjustable steering and throttle percentage (dual rates)
    • Adjustable steering and throttle sensitivity (exponential)
    • BEC Voltage and Motor Temperature Sensor installed
  • Clipless Body Mount System
    • Quick one-hand installation and removal
    • Uses pivoting rear latch mechanism
    • Eliminates body posts and clips
  • Drivetrain
    • Full-time shaft-driven 4-wheel drive
    • All-metal gears and CVDs
    • Overdrive gearing pre-installed
    • Torque-Biasing Center Drive absorbs shocks and distributes power
    • 24 mm splined wheel hexes
    • Wheel hexes retained with a clip
    • 17 mm hex on outside of wheel
    • Sealed, silicone fluid-filled diffs with large module ring and pinion gears
    • Splined outdrives attached with external thru-bolt method
    • Heavy-duty Cush Drive with steel spur gear
    • Fully machined aluminum stub axles
    • Splined aluminum center driveshaft
  • Heavy-Duty Fixed Motor Mount
    • Precision, preset gear mesh adjustments
    • No manual gear mesh adjustments are required
    • Motor retention separate from gear mesh
  • Heavy-Duty Modular Composite Chassis
    • Interlocking front and rear bulkheads
    • Motor mounts to rear bulkhead to eliminate gear crunching flex
    • Easy to service and access components
    • Driveline is sealed in the chassis to keep out dirt and grit
  • Clipless Battery Retention System
    • No body clips or hook and loop straps
    • Battery hold-downs pivot for easy access
    • Adjustable for battery size
    • More secure than conventional retention systems
    • Integrated into chassis top brace for improved battery tray and chassis stiffness
  • Bumpers
    • Front energy absorbing rubber impact bumper
    • Lower front and rear skids for impact and abrasion resistance
    • Integrated nerf bars for side impact resistance
  • Heavy-Duty Steering Bell Cranks and Servo Saver
    • High-output steering servo
    • Wired directly into the RX box, no external wires seen on chassis
    • New mounting system to fully support case
    • Double-shear, bearing supported servo horn
  • Suspension
    • Engineered to optimize suspension travel and steering angles
    • All critical suspension points have double shear strength
    • High strength steel suspension pins used throughout
    • Suspension pins retainers won’t come loose or “back-out”
    • 4 mm machined pivot balls
    • C-hub and steering block geometry maximizes steering angle
    • Adjustable roll center
    • Fixed, high-strength camber and toe links
    • Steel upper and lower tie bars
    • Full contact sealed bearings used in exposed locations
  • Large-Scale GTX Shocks
    • Machined aluminum threaded body
    • Extra-large bore and capacity
    • 5.2 mm damper shaft
    • Lower seal cartridge includes integrated wiper seal combination
    • Adjustable upper spring retainer
    • Plastic shock caps with pivot balls
    • Fixed shock locations
    • Lower spring perches bolted on
  • Wheels/Tires
    • Massive 8.4″ Sledgehammer belted tires
      • Virtually eliminates ballooning at high speeds
      • Open tread block design
      • 2-piece foam insert
      • High-strength glue and bead design
    • Large, dual-diameter wheels
Specifications Weight: 19.1 pounds (8.66 kg) Length: 30.67 inches (779 mm) Width: 21.3 inches (540 mm) Front Track: 21.3 inches (540 mm) Rear Track: 21.3 inches (540 mm) Height: 13.99 inches (355 mm) Wheelbase: 18.92 inches (480 mm) Center Ground Clearance: 4.2 inches (107 mm) Drive System: Shaft-driven 4WD Drivetrain: Shaft-driven 4WD Transmission: Single speed Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch: 1.0 metric pitch Servo(s): 2085X metal gear ultra-high-torque waterproof Radio System: TQi 2.4 GHz 2-channel transmitter with wireless module Battery Compartment Specs: 197 mm X 52 mm X 44 mm Motor: Velineon 1200XL Motor Type: 1275 kV sensorless brushless Motor Weight: 23.44 ounces (665 g) Motor Length: 4.32 inches (110 mm) Motor Diameter: 1.88 inches (48 mm) Motor Shaft Size: 5 mm Motor Connector Type: 6.5 mm bullet connectors ESC: Velineon VXL-8s ESC Type: Brushless ESC Case Size: 2.23 inches (58 mm) / 2.83 inches (72 mm) / 1.81 inches (46 mm) ESC Weight: 7.60 ounces (215.5 g) Motor Connectors: 6.5 mm bullet connectors Battery Connectors: Traxxas High-Current Connectors ESC Power Wire: 10 gauge Maxx Cable Model Type: Monster Truck Model Speed: 50+ mph with two 4s LiPo batteries and optional pinion gear Model Skill Level: 6 Requires (4) AA batteries for the transmitter

VideosHide Videos

This is the Traxxas Sledge with dual LiPo batteries & EZ-Peak Dual ID charger included! Out of the box, this setup will be ready for up to 70+MPH speeds* and the ultimate bashing versatility. The Traxxas Sledge 1/8 scale 4WD brushless monster truck. Fully assembled, Ready-To-Race, with TQi 2.4GHz radio system, VXL-6s brushless power system, Belted Sledgehammer Tires and ProGraphix clipless body. The new 6S Sledge has been beefed up with Belted Sledgehammer Tires and Color-Matched Blue, Red, Green, and Orange Aluminum Parts. Belted Sledgehammer Tires Explore Sledge’s top speed with confidence and control. New belted Sledgehammer tires provide more precise feel, with instant response to control inputs. Traxxas' belting process results in less tire distortion, allowing Sledge to feel even faster with a larger, more consistent contact patch on the ground. Game-Changing Stability Experience the full power of Sledge in a whole new way. Traxxas belted tires resist ballooning to provide ultimate stability and control at high speeds. Geared For Belted Tires With new belted tires, hardened steel 15/52 gearing is now standard to maintain the incredible speed and relentless acceleration Sledge is known for. Color-Matched Aluminum All-new graphics are available in four colors with color-matched aluminum chassis, shocks, wheel hubs, shock towers, tie bars, T-bar, and more. Features
  • VXL-6s Waterproof Electronic Speed Control
    • 6s LiPo compatible
    • Integrated cooling fan
    • Real-time telemetry via Traxxas Link
    • 3-LED status indicators
    • Powered accessory ports
    • 10-gauge silicone wire
    • Integrated protection circuits
  • Velineon 2000 kV Brushless Motor
    • 4-pole 2000 kV
    • 5 mm output shaft
    • Finned can for better heat dissipation
    • Aluminum motor cradle mount
      • Supports entire motor length
      • Reduces flex for longer gear life
  • Up to 70+ mph with Two 3s LiPo Batteries (sold separately)
  • Traxxas Stability Management
    • Helps prevents spinouts and loss of control
    • Never dulls throttle or slows the truck
    • Adjusts from off to 100% assistance from the transmitter
  • TQi 2.4 GHz High Output Radio System
    • TQi 2-channel transmitter
    • Traxxas Link enabled
    • 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
    • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
    • Programmable Multi-Function knob
    • Adjustable steering and throttle percentage (dual rates)
    • Adjustable steering and throttle sensitivity (exponential)
  • Drivetrain
    • Full-time 4-wheel drive
    • Heavy-duty steel driveshafts
    • Large 8 mm steel stub axles
    • Steel dogbone center driveline
    • Protective rubber boots on differential inputs
  • Transmission
    • Mod-1 pinion and spur gears
    • Fixed gear mesh system
    • Torque-Biasing Center Drive
  • Differentials
    • Heavy-duty sealed 4-gear design
    • Large scale steel ring and pinion gears
    • Large 8 mm output shafts
    • Steel drive cups
    • Easy access bulkheads
  • GT-Maxx Shocks
    • Longer rear shocks for more travel
    • Machined aluminum threaded body
    • Extra-large bore and capacity
    • Large-diameter damper shaft
    • Lower seal cartridge with dual X-rings
    • Height-adjustable spring retainer
    • Lower spring perches bolted on
  • Suspension
    • Thick 5 mm 6061-T6 aluminum shock towers
    • Ultra-tough composite arms
      • Made from our strongest cold-weather material
      • Molded insert for clean look
      • Rear rock deflectors
      • Press-in hinge pins to reduce play
    • Oversize molded toe and camber links
    • Heavy-duty C-hubs with oversize bearings
    • Multiple mounting points for suspension tuning
  • Chassis
    • 3.2 mm ribbed aluminum chassis
      • Formed edges for improved strength
    • Thick aluminum T-Bar for added rigidity
    • High-strength buttressing on shock towers
    • Rugged locking battery compartment with quick-release door
    • Low-CG design for improved handling
    • Interlocking components for tight tolerances
    • Tough front and rear bumpers double as skid plates
    • Hidden wire management for clean appearance
  • Clipless ProGraphix Body
    • One-handed clipless body mounting system
    • Rigid internal frame
    • Molded body reinforcements for tear-through protection
    • Protective roof skids
    • Rugged high-downforce rear wing
  • Steering
    • Waterproof 2275 metal gear servo
      • 347 oz-in torque
    • High-throw bellcrank steering design
    • Heavy-duty servo saver with aluminum posts
    • Metal servo horn
  • Wheels and Tires
    • Huge 6.7″ Sledgehammer all-terrain tires
      • Belted carcass resists ballooning
    • Tough 3.8″ black wheels
    • Splined 17 mm aluminum axle hubs
*Click to See the Full Line of Parts/Accessories SPECIFICATIONS Length: 23.78 inches (604 mm including wing) Width: 18.10 inches (459 mm) Front Track: 18.10 inches (459 mm) Rear Track: 18.10 inches (459 mm) Height: 8.43 inches (214 mm) Wheelbase: 15.10 inches (384 mm) Center Ground Clearance: 1.95 inches (50 mm) Drivetrain: Shaft-driven 4WD Transmission: Single speed Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch: 1.0 metric pitch Servo(s): 2275 digital metal-gear waterproof (347 oz-in) Radio System: TQi 2.4 GHz 2-channel transmitter with TSM receiver Battery Compartment Specs: 181 mm X 54 mm X 45 mm Model Speed: 70+ mph with 6s LiPo battery and optional gearing* **Optional Gearing Need for Top Speeds: 65+ - 16-T Pinion / 52 Tooth Spur (TRA6489X & TRA9652) 70+ - 18-T Pinion / 46 Tooth Spur (TRA6491R & TRA9651) Model Skill Level: 4 Scale: 1/8 Weight: 12.74 lbs (5.77 kg) REQUIRES (4) AA alkaline batteries for the transmitter.
INCLUDED FREE ITEMS
TRA2827X - 3000mAh 7.4v 2-CELL LIPO BATTERY
TRA2920 - USB-C 2s LIPO iD CHARGER This is the Traxxas Ford F-150 Raptor BL-2S 2WD Ready-to-Race Truck. The Slash Raptor comes fully-assembled with waterproof electronics, TQ 2.4 GHz 2-channel radio system, BL-2s brushless power system, and clipless painted body. Battery and charger are sold separately. FORD F-150 RAPTOR STYLING AWARD-WINNING SLASH PERFORMANCE Based on the award-winning Slash, the Traxxas Ford F-150 Raptor combines show-stopping looks with legendary Slash toughness. Now Raptor comes standard with the BL-2s brushless power system for a more responsive throttle, powerful acceleration, and all-day fun. Raptor comes fortified with Traxxas’ Extreme Heavy Duty components to take even the most brutal punishment in stride. BL-2S BRUSHLESS POWER SYSTEM Raptor’s waterproof BL-2s brushless power system ramps up the fun with more torque, faster acceleration, and less maintenance than comparable brushed power systems. The BL-2s is a model of efficiency and refinement, offering more power than before with the safety and convenience that only Traxxas can deliver. EXTREME HEAVY DUTY COMPONENTS Extreme Heavy Duty components come factory-installed on Raptor for game-changing durability. Key drivetrain and suspension components are beefed-up with extra material for unbeatable strength. From HD suspension arms to upgraded driveshafts, Raptor sets a new standard for durability for your off-road adventures. CLIPLESS FORD F-150 RAPTOR BODY Raptor’s sleek clipless body comes fully detailed with an injection molded grille, front bumper, and body accessories to capture the full depth and detail of Ford’s original design. Raptor’s hidden latching system maximizes convenience and scale realism by removing traditional body clips which would interrupt the body’s clean lines. Features
  • Licensed Ford F-150 Raptor Clipless Body
    • Injection molded grille, side mirrors, and hood vent
    • Chassis nerf bars absorb impact and support the body
    • Tough front and rear replica bumpers
    • Holds tight for intense action
    • Body reinforcements to prevent pull-through damage
    • Holds tight for intense action
    • Quick and easy removal
  • Extreme Heavy Duty Upgrade Components
    • Strengthened C-hubs, axle carriers, and steering blocks
    • Extreme heavy duty driveshafts
  • BL-2s Waterproof Electronic Speed Control
    • Heat sink accepts accessory cooling fan (3340)
    • Three Programmable Drive Profiles
      • Sport Mode - Forward / Brake / Reverse
      • Race Mode - Forward / Brake
      • Training Mode - 50% Forward / Brake / 50% Reverse (patented)
    • Traxxas EZ-Set one-button setup
    • Built-in two-stage low-voltage detection for LiPo batteries
    • NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
    • LiPo battery packs: 2 cells (7.4 volts)
  • 3300 kV Brushless Motor
    • Integrated cooling fan
    • Low-maintenance design
    • Efficient ball bearings
    • 3300 kV
  • TQ 2.4 GHz Transmitter
    • Full-size 2-channel transmitter
    • All-day comfort with precise long-range control
  • Tough Fiber-Composite Monocoque Chassis
    • Long 13.2″ wheelbase for increased stability
    • Over 3.5″ of ground clearance
  • Easy Access Battery Compartment
    • Adjustable battery hold down
    • Accepts 6- and 7-cell flat packs and 7-cell hump packs
    • Accepts many 2s LiPo battery configurations
  • Suspension
    • Heavy-duty suspension arms
    • Adjustable steel turnbuckles
    • Oil-filled Ultra Shocks
    • White powder-coated springs
  • Steering
    • Chassis-mounted 2075 servo
    • High-performance bellcrank system minimizes bump steer
  • Transmission
    • Velineon-ready Magnum 272 metal-gear transmission
    • Planetary gear differential with steel ring gear
    • Sealed gearbox protects the transmission
    • External gear cover with easy clutch access
  • Drivetrain
    • Extreme heavy-duty driveshafts
    • Torque Control slipper clutch
  • Wheels and Tires
    • Split-Spoke SCT wheels
    • 2.2″ outer diameter, 3″ inner diameter
    • Replica BFGoodrich Mud Terrain T/A Tires
  • Sealed Ball Bearings
  • Hex hardware with Rust-Resistant Black Oxide Coating
Specifications Length: 22.36 inches (568 mm) Front Track: 11.65 inches (296 mm) Rear Track: 11.65 inches (296 mm) Center Ground Clearance: 3.5 inches (89 mm) Weight (no battery): 4.76 pounds (2.16 kg) Height (overall): 8.43 inches (214 mm) Wheelbase: 13.2 inches (335 mm) Shock Length (front): 3.45 inches (88 mm) - Long Shock Length (rear): 3.98 inches (101 mm) - XX-Long Tires: Replica BFGoodrich Mud Terrain T/A Tires Tire Diameter: 4.3″ x 1.7″ inches (109 mm x 43 mm) Wheels (front/rear): Split-Spoke SCT wheels Wheel Diameter: 2.2 inches (56 mm) (outer) 3.0 inches (76 mm) (inner) Speed Control: BL-2s electronic speed control Motor (electric): BL-2s 3300 kV sensorless brushless Overall Drive Ratio: 12.58:1 Differential Type: Planetary Gear Pitch: 48 Chassis Structure/Material: Composite tub Drive System: 2WD Steering: Dual-bellcrank with integrated servo saver Radio System: TQ 2.4 GHz (2-channel) Servo: Waterproof digital 2075 servo (125 oz-in torque) Skill Level: 1 Battery Compartment (L/W/H): 165 mm (6.49″) x 50 mm (1.95″) x 23/25 mm (1.02″/0.90″) Requires (4) AA Batteries for Transmitter USB-C Charging Cable and Block** **TRA #2920 - Full charging output requires a 45 watt or greater power supply like the Traxxas 2912 and high-quality USB-C cable like the Traxxas 2916.
This is the Traxxas XRT 4WD Brushless Ready-to-Race Truck COMBO with two 4S 6700mAh batteries and the EZ-Peak Live ID DUAL OUTPUT quick charger, with TQi Traxxas Link Enabled 2.4GHz Radio System, Velineon VXL-8s brushless ESC (fwd/rev), and Traxxas Stability Management (TSM). XRT: RACE-INSPIRED ENGINEERING - EXTREME 8S POWER AND SPEED The Traxxas XRT fuses race-inspired design and engineering with X-Maxx power and strength. The result is an all-new platform with sharp reflexes and unprecedented stability that is capable of exploiting the upper range of extreme 8s power and speed. BUILT FOR SPEED AND HANDLING XRT was engineered with a focus on speed, handling, and performance. XRT’s low center of gravity, ultra-wide stance and low-profile body deliver confidence and control as XRT accelerates across the wide-open spaces to an all-out speed of 60+MPH. PROVEN TOUGH ALL-METAL DRIVELINE XRT performance and durability begins with its all-metal 8s driveline. Steel 4-gear differentials and steel driveshafts are joined by a high-strength extruded aluminum center shaft. It’s a precision-engineered recipe that has been proven monster-truck tough in the X-Maxx. RACE-INSPIRED LOW-CG CHASSIS XRT’s performance-focused chassis design is configured to lower the center of gravity for superior handling and stability. The dual 6700 4s batteries and the steering servo are positioned to place the weight as low as possible in the chassis and provide protection for these critical components. PATENT-PENDING CLIPLESS BODY XRT’s patent-pending clipless body easily removes and installs in just seconds and yet it locks in place with incredible strength and security. The system uses a cage inside the body to minimize flex while external skids are strategically placed to protect the body. GRAVIX RACE TIRES XRT’s Gravix race tires are a revolutionary new hybrid design with densely packed biting edges and sipes. They deliver outstanding grip on hard-packed surfaces along with fast and quiet-running precision. VXL-8S POWER SYSTEM Already Traxxas’ most powerful speed control, XRT’s VXL-8s goes even further with an aggressive tune that maximizes power output across the entire RPM range. More power under the curve delivers mid-range punch that hits hard for rolling wheelies on demand. Bury the throttle at any speed and XRT responds instantly with effortless acceleration. Features
  • VXL-8s Waterproof Electronic Speed Control
    • Aggressive tuning for more power at any RPM
    • 8s LiPo compatible
    • Built-in cooling fan
    • Real-time telemetry via Traxxas Link
    • Machined heat sinks
    • 10-gauge silicone wire
    • Integrated protection circuits
    • LED status lights
  • Velineon 1200XL Brushless Motor
    • “Big Block” brushless motor
    • 4-pole 1275 kV
    • 5mm output shaft
    • Oversize aluminum heatsink for improved cooling
    • Dual cooling fans
  • Up to 60+ mph with Two 4s LiPo Batteries and Included Optional Speed Gear
  • Traxxas Stability Management (TSM)
    • Improves straight line acceleration and braking on low-traction surfaces
    • Never dulls throttle or slows the truck
    • Adjusts from off to 100% assistance from the transmitter
  • TQi 2.4GHz High Output Radio System
    • TQi 2-channel transmitter
    • Automatically stores and loads settings for up to 30 Traxxas
    • Link-enabled models
    • Programmable multi-function knob
    • Adjustable steering and throttle percentage (dual rates)
    • Adjustable steering and throttle sensitivity (exponential)
    • Adjustable steering and throttle end points
    • High 13ms frame rate and near-zero latency for responsive control
    • 5-channel micro receiver (#6533) with fail-safe security
    • Patented waterproof receiver box with easy-access plug
  • X-Maxx Spec 8s Drivetrain
    • Full-time shaft-driven 4-wheel drive
    • Heavy-duty steel CV driveshafts & axles
    • Splined aluminum center driveshaft
    • Fully machined aluminum stub axles
  • Transmission
    • Mod-1 steel pinion and spur gears
    • Fixed gear mesh system
    • Torque-Biasing Center Drive
  • X-Maxx Spec 8s Differentials
    • Heavy-duty sealed 4-gear design
    • Large scale steel ring and pinion gears
    • Splined outdrives attached with external thru-bolt method
    • Reinforced bulkhead and covers increase bearing support
  • Rock-Solid Motor Mounting System
    • Precise preset gear mesh adjustments
    • 4 keyed pins lock the motor in place
    • Motor retention separate from gear mesh
  • GTX Race Shocks
    • Machined aluminum threaded body
    • Extra-large bore and capacity
    • 5.2mm damper shaft
    • Lower seal cartridge includes integrated wiper seal combination
    • Height-adjustable spring retainer
    • Heavy-duty composite shock caps with pivot balls
    • Lower spring perches bolted on
  • WideMaxx Suspension
    • Extra-wide suspension arms
      • Made from heavy-duty cold-weather composite
    • Performance-optimized geometry
    • Double-shear connections
    • High-strength steel suspension pins with retainers
    • 4mm machined pivot balls
    • Fixed high-strength camber and toe links
    • Heavy-duty steering blocks and axle carriers
    • Oversized wheel bearings
  • Low-CG Chassis Design
    • Modular chassis with interlocking bulkheads
      • Low center of gravity for improved handling
      • Flat bottom design
      • Heavy-duty interlocking skid plates
      • High-strength buttressing on shock towers
    • Dual snap-lock battery compartments
      • Protects batteries from side impacts
      • Allows secondary battery-clip security
    • Interlocking components for tight tolerances
    • Wire management for clean appearance
  • Patent-Pending Clipless Body
    • Snaps in place in just seconds
    • Secure body latches are easy to use
    • Rigid internal frame
    • Dual cold-air intakes
    • Molded body reinforcements for tear-through protection
    • Protective top skids
    • Rugged high-downforce rear wing
  • Heavy-Duty Bumpers
    • Reinforced front bumper and rear wing support
      • Absorb impact forces while retaining shape
    • Nerf bars for side impact resistance
    • Heavy-duty wheelie bar with carry handle
  • Wheels and Tires
    • 7.4" Gravix race tires
      • Low sidewall for sharp turn-in response
      • Thick center carcass resists ballooning at high speed
      • Lower rotational mass for faster acceleration
    • 4.0" matte black XRT race wheels
    • High-strength glue and bead design
    • Huge 24mm splined wheel hubs
  • Steering
    • Powerful 365 oz-in steering servo
    • Heavy-duty cam-style servo saver
    • Dirt evacuation channels
    • Fully waterproof
  • Sealed Ball Bearings
  • Hex hardware with Rust-Resistant Black Oxide Coating
High-Downforce Wing XRT's rear wing provides added stability for 60+mph speed runs and integrates neatly with the clipless body for a sophisticated look. The wing mount soaks up even the hardest landings without transferring shock energy to the chassis. Integrated Cold-Air Intakes Cold-air intakes are fully integrated into XRT's clipless body frame for maximum strength and tear prevention. The lower intake even features an internal grille to keep rocks and other debris out of the chassis and away from the steering components. Integrated Shock Tower Design XRT's shock towers are an integral part of the frame with massive buttresses to dissipate shock loads throughout the chassis. Heavy-duty receivers secure the clipless body latches directly to the towers for maximum strength. Rugged Top Skids XRT's rugged top skids protect the clipless body from damage. Internal reinforcements maintain the body's integrity. Integrated Wheelie Bar XRT's wheelie bar helps prevent backflips under full-throttleacceleration and flexes to absorb impacts on less-than-perfect landings. The integrated wheelie bar also functions as a convenient handle to transport XRT to your next adventure. Aluminum Heatsink with Dual Fans XRT's aluminum heatsink wraps around nearly 75% of the motor's exposed surface to pull out more heat. Dual electric fan shrouds draw cooling air from the body vents through the oversized fins for more effective cooling performance and longer run times. Rugged Skid Plates XRT's three rugged skid plates key together tightly to protect the chassis from damage. The front skid plate was designed at just the right angle to kick the front end up and prevent digging into the ground when landing nose down. Specifications Length (including wing): 31.41 inches (798mm) Front Track: 23.43 inches (595mm) Rear Track: 23.43 inches (595mm) Ground Clearance: 1.93 inches (49mm) Weight: 19.70 pounds (8.94kgs) - without body 21.03 pounds (9.54kgs) - with body 23.87 pounds (10.83kgs) - with body & two 4s 6700mAh LiPos Height: 10.15 inches (258mm) - ride height 12.12 inches (308mm) - full droop Wheelbase: 18.9 inches (480mm) Shock Length (front): 6.79 inches (173mm) Shock Length (rear): 6.79 inches (173mm) Tires (Pre-Glued): 7.4 x 4.0 inches (188mm x 102mm) Wheels: 4.3 x 5.7 inches (110mm x 147mm) Speed Control: Velineon VXL-8s Motor (electric): Velineon 1200XL Brushless with heat sink and dual fan shrouds Overall Drive Ratio: 20.6:1 (20/50 motor pinion and spur gear) Differential Type: Sealed, hardened steel bevel, limited slip Gear Pitch (Spur and Pinion): Module 1.0 Chassis Structure/Material: Composite Nylon Tub Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Bellcrank Radio System: TQi 2.4GHz Transmitter with TSM receiver Servo: Torque: 365oz. Speed: 0.17 sec/ 60 degrees(6.0V) Top Speed: 60+ MPH with two 4s LiPo batteries and included optional gearing Skill Level: 5 Battery Tray: 186mm x 51mm x 44mm Requires (4) AA batteries for the transmitter

VideosHide Videos

This Combo Includes:
Traxxas Stampede 4X4 Brushless Truck
EZ-Peak ID LiPo Charger
7.4V 2S 5800mAh LiPo Battery This is the Traxxas Stampede 4X4 Brushless Ready-to-Run Waterproof Radio Controlled Monster Truck 2S Lipo Combo with 5800mAh 2S LiPo, EZ-Peak ID Charger, with clipless body, extended chassis, Extreme Heavy Duty Upgrade Kit, BL-2s Brushless power system and the TQ 2.4GHz Radio System (Traxxas Bluetooth Link Module Compatible - Module sold separately). Stampede 4X4 Brushless Bigger and Stronger Then Ever! Stampede 4X4 is bigger and badder than ever with a new clipless body, extended chassis, and huge 5.3″ Sledgehammer tires for an aggressive monster truck stance. Stampede’s all-new BL-2s brushless power system delivers effortless power for all-day fun with an added boost of torque for terrain-shredding burnouts and powerful acceleration. Stampede 4X4 also comes standard with Traxxas’ Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability. NEW BL-2S BRUSHLESS POWER SYSTEM Stampede 4X4’s BL-2s brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Stampede 4X4 to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 kV is long-lasting and requires virtually no maintenance. EXTREME HEAVY DUTY UPGRADE KIT Stampede 4X4’s pre-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede. CLIPLESS BODY MOUNTING Stampede 4X4 now uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. A rugged internal cage attaches to the body with molded reinforcements to prevent pull-through damage. Tough roof and tailgate skids protect the body in the event of a rollover. Features
  • BL-2s Waterproof Electronic Speed Control
    • Heat sink accepts accessory cooling fan (#3340)
    • Three Programmable Drive Profiles
      • Sport Mode - Forward / Brake / Reverse
      • Race Mode - Forward / Brake
      • Training Mode - 50% Forward / Brake / 50% Reverse (patented)
    • Traxxas EZ-Set one-button setup
    • Built-in two-stage low-voltage detection for LiPo batteries
    • NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
    • LiPo battery packs: 2 cells (7.4 volts)
  • 3300 kV Brushless Motor
    • Integrated cooling fan
    • Low-maintenance design
    • Efficient ball bearings
    • 3300 kV
  • TQ 2.4 GHz Transmitter
    • Full-size 2-channel transmitter
    • All-day comfort with precise long-range control
  • Extreme Heavy-Duty Upgrade Kit Installed
    • Strengthened C-hubs, axle carriers, and steering blocks
    • Extreme heavy-duty driveshafts
      • Oversize diameter
      • 6mm axles
      • Steel wheel hexes
  • Clipless ProGraphix Body
    • Tough reinforced bumpers
    • Reinforced inner cage
    • Rugged roof rollover protector
    • Tailgate protector
    • Holds tight for intense action
    • Quick and easy removal
  • Chassis
    • Modular composite tub design
    • Secure battery hold-down latch
    • High angle bumpers
  • Suspension
    • HD-composite suspension arms
    • Oil-filled Ultra Shocks
    • White powder-coated springs
  • Steering
    • Chassis-mounted #2075 servo
    • Dual bellcrank design with integrated servo saver
  • Drivetrain
    • Full-time shaft-driven 4-wheel drive
    • Oil-filled steel gear front and rear differentials
    • Large 32-pitch steel spur gear
  • Wheels and Tires
    • Large 2.8” graphite gray wheels
    • Tall 5.3” Sledgehammer tires
  • Sealed Ball Bearings
  • Hex hardware with Rust-Resistant Black Oxide Coating
Specifications Length: 17.87 inches (454mm) Width: 13.10 inches (333mm) Ground Clearance: 2.44 inches (62mm) Weight: 5.98 pounds (2.7kg) without batteries Height: 8.34 inches (212mm) Wheelbase: 11.62 inches (295mm) Front Shock Length: 3.45 inches (88mm) - Long Rear Shock Length: 3.98 inches (101mm) - XX-Long Tires (pre-glued): 5.3 inches (133mm) tall Sledgehammer Wheels: 2.8 inches (71mm) graphite gray wheels Speed Control: BL-2s electronic speed control Motor (electric): BL-2s 3300 kV sensorless brushless Gear Pitch: 32 Overall Drive Ratio: 15.36:1 Differentials: Hardened steel bevel, sealed, limited slip Chassis Structure / Material: Modular composite tub Brake Type: Electronic Drive System: Shaft driven 4WD Steering: Dual bellcrank with integrated servo saver Radio System: TQ 2.4 GHz (2-channel) Servo: Waterproof #2075 Skill Level: 1 Battery Compartment (L/W/H): 162mm x 47mm x 26mm Requires (4) AA Batteries for transmitter
This Combo Includes: Traxxas Slash 4x4 VXL Truck with Extreme Heavy Duty Kit and Clipless Body EZ-Peak ID 4-AMP LiPo Charger 7.4V 5800mAh LiPo Battery This is the Traxxas Slash 4x4 Brushless VXL Fully-Assembled Ready-to-Race 1/10 Short Course Truck with LiPo combo package! This package includes a Traxxas EZ-Peak ID 4-amp quick charger and a 7.4V 5800mAh LiPo battery for extended runtimes and extra performance! The truck comes with Traxxas Stability Management (TSM), TQi 2.4GHz radio system (Traxxas Bluetooth Link Module Compatible - Module sold separately), VXL-3s brushless power system, Extreme Heavy Duty Kit, and clipless pre-painted body. Slash 4X4 VXL Extreme Speed Meets Extreme Strength Beneath Slash’s clipless body, the extreme Velineon brushless power system feeds power through the factory-installed Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability. Extreme Heavy Duty Upgrade Kit Slash 4X4 VXL’s factory-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Slash. Clipless Body Mounting Slash's innovative clipless body features secure mounting with quick and easy removal. No posts, no clips—just drop the body onto the chassis and snap it into place for a secure hold. When it’s time to change the battery, depress the tabs under the wheel wells and lift up to access the chassis in just seconds. Class-Leading Brushless Power Slash 4X4's Traxxas Velineon Brushless Power system defines a whole new generation of outrageous electric power. Pour in the voltage and out comes the speed in tidal waves of force harnessed by precise throttle control. For the uninitiated, prepare yourself... the sheer brutal power combined with the Slash 4X4's four-corner grip results in tire-melting acceleration and lightning fast speed. The Velineon 3s components work together as an optimized package, from the patented Traxxas High-Current connector to the custom-wound motor. It delivers the ultimate in efficiency, speed, and run-time along with refined control. It's brushless performance the Traxxas way: wicked fast and easy to use. Just plug it in and it works, no special knowledge or programming skills required! Features
  • Clipless ProGraphix Painted Body
    • Pre-painted body with applied decals
    • Scale dimensions and looks of actual short course race trucks
    • Chassis nerf bars absorb impact and support the body
    • Scale front and rear tube-style bumpers
  • Extreme Heavy Duty Upgrade Kit Installed
    • Strengthened C-hubs, axle carriers, steering blocks, and shock towers
    • Maxx duty driveshafts
      • Oversize diameter
      • 6 mm axles
      • Steel wheel hexes
  • VXL-3s Waterproof Electronic Speed Control
    • Three programmable drive profiles:
      • Sport Mode - Forward / Brake / Reverse
      • Race Mode - Forward / Brake
      • Training Mode - 50% Forward / Brake / 50% Reverse (patented)
    • Traxxas EZ-Set one-button setup
    • Large heat sink
    • Built-in two-stage low-voltage detection for LiPo batteries
    • NiMH battery packs: 6-9 cells (7.2 to 10.8 volts)
    • LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
  • Velineon Brushless Motor
    • Ultra high-temperature sintered Neodymium magnets
    • Optimized for power and efficiency in 1/10th scale vehicles
    • Low-maintenance, unique Traxxas design
    • Efficient, high-speed ball bearings
    • Precision-balanced rotor
    • 3500kV
    • Brilliant blue-anodized finish
  • Traxxas Stability Management (TSM)
    • Improves straight line acceleration and braking on low-traction surfaces
    • Maintains steering composure to allow throttle-on powerslides
    • Never dulls throttle or slows the truck
    • Adjusts from off to 100% assistance from the transmitter
  • TQi 2.4 GHz High Output Radio System
    • TQi 2-channel transmitter
    • 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
    • Compatible with optional TQi Traxxas Link Wireless Module (6511) to access full Traxxas Link app functionality (sold separately)
    • Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
    • Programmable multi-function knob
    • Adjustable steering and throttle percentage (dual rates)
    • Adjustable steering and throttle sensitivity (exponential)
    • Adjustable steering and throttle end points
    • Patented waterproof receiver box
  • Tough Fiber-Composite Modular Chassis
    • Modular chassis makes maintenance quick and easy
    • Long 12.75″ wheelbase for increased stability
    • Easy motor access with single-screw motor plate attachment
    • All electronics securely fastened to chassis
  • Easy Access Battery Compartment
    • Adjustable battery hold down
    • Accepts 6- and 7-cell flat packs and 7-cell and 8-cell hump packs
    • Accepts many 2s and 3s LiPo battery configurations
  • Transmission and Driveline
    • Full-time shaft-driven 4WD
    • Blue-anodized aluminum center driveshaft
    • Heavy-duty slipper clutch & large 32-pitch gears
    • Sealed, silicone-filled differentials with steel gears
  • Steering
    • Digital high-torque 2075 waterproof steering servo
    • Dual bellcrank steering system with integrated servo saver
  • Suspension
    • Heavy-duty composite suspension arms
    • Adjustable steel turnbuckles
    • Captured rod ends won't pop off
  • Springs and Shocks
    • Fully adjustable oil-filled Ultra Shocks with X-ring technology
    • Race-tuned progressive rate white powder-coated springs
  • Wheels and Tires
    • Pre-glued BFGoodrich Mud Terrain T/A tires with performance foam inserts
    • 2″ outer diameter, 3″ inner diameter dual-profile SCT wheels
  • Rubber-Sealed Ball Bearings
  • Precision Hex Hardware
  • Backed by Unparalleled Traxxas Parts Availability50
Specifications Model Skill Level: 2 Scale: 1/10 Weight: 5.82 pounds (2.64 kg) Length: 22.36 inches (568 mm) Width: 11.65 inches (296 mm) Front Track: 11.65 inches (296 mm) Rear Track: 11.65 inches (296 mm) Height: 7.60 inches (193 mm) Wheelbase: 12.75 inches (324 mm) Center Ground Clearance: 2.83 inches (72 mm) Drivetrain: Shaft-driven 4WD Differential Type: Hardened steel bevel, sealed, limited slip Gear Ratio (Internal): 11.82:1 Gear Pitch: 32 pitch Radio System: TQi 2.4 GHz 2-channel transmitter with TSM receiver Servo(s): 2075 digital high-torque waterproof Motor Name: Velineon 3500 Motor Type: Sensorless brushless Motor Weight: 9.24 ounces (262 g) Motor Length: 3.03 inches (77 mm) overall length, 2.2 inches (56 mm) can length ESC Name: VXL-3s electronic speed control ESC Type: Brushless ESC Case Size: 1.54 inches (39 mm) / 2.18 inches (55 mm) / 1.30 inches (33 mm) ESC Weight: 3.17 ounces (90 g) Motor Connectors: 3.5 mm bullet Battery Compartment Specs: 165 mm X 50 mm X 23 mm / 25 mm Model Speed*: 60+ mph with optional gearing and 3s LiPo battery (items sold separately) *With optional gearing and 3s LiPo battery (items sold separately) **Battery expansion kit available Requires (4) AA batteries for transmitter
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Colors

Orange, Green, Red, Blue

Sold000000
Shipping

Related products

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare