Content | This is the Traxxas Slash 1/16 4x4 Short Course Ready-to-Run RC Truck with TQ 2.4 GHz radio system, Titan 12T 550 motor, XL-2.5 electronic speed control, 7.2 volt NiMH iD battery, 2-amp USB-C fast charger, and ProGraphix race replica painted body.
Slash 4X4 Performance in 1/16 Scale
The Traxxas Slash 4X4 set the standard for short-course fun and versatility with speed, power, and track-ready handling. Now you can experience the fun of wheel-to-wheel Slash 4X4 racing in 1/16 scale Titan 550 power. At 14 inches long, the 1/16 Slash 4X4 is about half the size of the 1/10-scale Slash 4X4, but don't call it a "mini". This is a whole new category of RC performance and fun that no mere mini-model can match. Beneath the tough Race Replica polycarbonate shell, you'll find sophisticated suspension technology and chassis design with the quality and durability you expect from Traxxas.
Battery and Charger Included!
1/16 Slash includes a powerful 7.2 volt 1200 mAh Traxxas Power Cell rechargeable NiMH battery pack to reach its 30+ mph top speed. Fast 2-amp charging is available virtually anywhere thanks to the included USB-C battery charger with iD technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time.
Modified Muscle
Leave it to Traxxas to put the huge torque of the Titan 550 motor into the 1/16 Slash for incredible acceleration and monster power. The Titan 12T motor delivers exciting performance with long-lasting performance. An integrated cooling fan pulls cool air through vent tunnels molded into the motor plate to keep temperatures down. The XL-2.5 electronic speed control comes standard with three drive profiles, low voltage detection, thermal shutdown protection, gold-plated connectors, and incredibly low resistance.
Features
- Race Replica ProGraphix Painted Body
- 1/16 Scale pre-painted body with applied decals
- Scale dimensions and looks of actual short course race trucks
- Scale front and rear tube-style bumpers
- Waterproof XL-2.5 Electronic Speed Control
- Innovative waterproof design
- Three drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode - 50% forward / brake / 50% reverse (patented)
- Traxxas EZ-Set one-button setup
- High-capacity heat sink
- LiPo and NiMH compatible with two-stage low-voltage detection
- Titan 550 Motor
- Powerful Titan 12T 550 modified motor with internal cooling fan
- Oversized armature for big torque and increased power handling
- Virtually maintenance-free operation
- TQ 2.4 GHz 2-Channel Radio System
- Ergonomic transmitter with internal antenna
- Traxxas 6519 3-channel micro receiver with fail-safe security
- Patented O-ring sealed watertight receiver box keeps the micro receiver dry
- Includes Battery and USB-C Charger
- 2-amp USB-C fast charger
- 1200 mAh Traxxas 6-cell 7.2 V NiMH battery with iD
- Fiber-Composite Monocoque Chassis
- Low-CG design for improved handling
- Tough skid plates for driveline protection
- All electronics securely fastened to chassis
- Dual Integrated Battery Compartments
- Quick-release battery doors for fast pack changes
- Intake and exhaust cooling vents keep battery temperatures down
- Accepts 1/16 scale NiMH and LiPo batteries
- Transmission and Driveline
- Full-time shaft-driven 4WD
- Sealed heavy-duty transmission
- Adjustable slipper clutch
- Sealed, silicone-filled differentials with steel gears
- Heavy-duty telescoping U-joint driveshafts
- Steering
- Digital waterproof Traxxas 2080 steering servo
- Servo horn with integrated servo saver
- Suspension
- Twin-arm pivot ball suspension
- Progressive rocker-arm damping for extreme travel
- Captured rod ends won't pop off
- Springs and Shocks
- Inboard fully adjustable oil-filled GTR shocks
- Adjustable pre-load collars
- Red powder-coated springs
- Wheels and Tires
- Pre-glued all-terrain tires with high-performance foam inserts
- Satin chrome 5-spoke beadlock style wheels
- Rubber-Sealed Ball Bearings
- Precision Hex Hardware
- Unparalleled Traxxas support parts availability
Revo-Spec Suspension
The unique Revo-spec suspension geometry multiplies the suspension travel to lengths normally found on larger models. It provides true progressive rate performance that's light over the small bumps and instantly tightens when compressed to resist bottoming out over large jumps.
3-channel Micro Receiver with Fail-Safe Security
The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED indicates power-on and bind status for fool-proof control and convenience. In the event of signal loss, the receiver will automatically return the throttle to neutral and hold the last commanded steering position. The fail safe programming is conveniently built-in and does not need to be set or activated.
Waterproof Electronics
Mud. Water. Snow. 1/16 Slash 4X4's waterproof electronics and fully sealed receiver box let you make tracks in conditions that leave other trucks parked at home. The antenna and servo wires route neatly through a special watertight seal. To protect the receiver from dust and water a custom shaped blue O-ring seals the receiver box.
Oil-Filled GTR Shocks
1/16 Slash 4X4 's super-smooth oil-filled shocks damp the suspension and maintain control no matter how rugged the terrain. They are fully tuneable and include pressure bladders for air/oil separation and threaded spring pre-load collars for quick ride height adjustments.
Ball-Bearing Transmission With Torque Control Slipper Clutch
1/16 Slash 4X4's high-efficiency, heavy-duty transmission is built for brushless power when you're ready to Power Up. An adjustable slipper clutch lets you tailor power delivery to suit the terrain and your driving style, and turns every watt of Titan power into pure performance.
Full-Time 4WD With Sealed, Silicone-Filled Differentials
Sealed, silicone-filled differentials resist "unloading" for superior performance and authentic handling as you drift the 1/16 Slash 4X4 through corners with precision and control. The viscosity of the differential fluid has been carefully tuned for exciting on-road performance, and the shaft-driven 4WD system delivers instant acceleration with proven efficiency and durability.
Digital High-Torque Waterproof Steering Servo
Small but powerful, the 1/16 Slash 4X4's 2080 servo cranks out 41.7 oz.-in. of tire-turning torque with digital circuitry for responsive control—even in water, mud and snow, thanks to its o-ring-sealed waterproof construction.
All-Terrain Tires & Wheels
Each corner of the 1/16 Slash 4X4 comes wrapped in all-terrain tires, pre-glued and mounted onto beadlock-style wheels. The tires deliver the perfect balance of forward traction and side bite on asphalt, dirt, and any other surface you throw at them. 12 mm mounting hexes open the door to additional wheel and tire combos to tune traction for specific surfaces.
Dual Battery Compartments
The 1/16 Slash 4X4 unleashes its full speed potential with the included Power Cell battery pack, but for extended run time and more "punch," the chassis' dual battery compartments let you add a second NiMH battery pack and parallel connector (both sold separately) to double the available battery capacity.
Specifications
Length: 14 inches (356 mm)
Front Track: 7.3 inches (185 mm)
Rear Track: 7.3 inches (185 mm)
Weight: 35 ounces (1000 g)
Height (overall): 4.92 inches (125 mm)
Wheelbase: 8.1 inches (206 mm)
Front Shock Length: 48 mm
Rear Shock Length: 48 mm
Front Tires (pre-glued): All-terrain 1.6″
Rear Tires (pre-glued): All-terrain 1.6″
Front Wheels: Dual-bead 35/47 mm, 12 mm hex hub
Rear Wheels: Dual-bead 35/47 mm, 12 mm hex hub
Electronic Speed Control: Waterproof XL-2.5
Motor (electric): Titan 12T
Transmission: Heavy-duty with steel idler gear
Gear Ratio (internal): 5.04:1, (reversed input: 9.72:1)
Overall Drive Ratio: 7.32:1 (stock, out-of-box)
Differential Type: Hardened steel bevel, sealed
Gear Pitch: 48 pitch
Chassis Structure/Material: Molded composite Nylon monocoque
Brake Type: Electronic
Drive System: Shaft-driven 4WD
Steering: Bellcrank
Radio System: Traxxas TQ 2.4 GHz (2-Channel)
Skill Level: 1
Requires
(4) AA Batteries for Transmitter
USB-C Charging Cable and Block | INCLUDED FREE ITEMS TRA2827X - 3000mAh 7.4v 2-CELL LIPO BATTERY TRA2920 - USB-C 2s LIPO iD CHARGER
This is the Traxxas BIGFOOT 4X4 Brushless 1/10 Ready-to-Run Waterproof Radio Controlled Monster Truck with TQ 2.4 GHz 2-channel radio system, BL-2s brushless power system, and BIGFOOT No. 8 painted body.
BIGFOOT 4X4
Classic Style with Brushless Performance!
Traxxas brings back the glory days of monster truck racing with the new BIGFOOT 4X4 equipped with BL-2s brushless power and Traxxas’ toughest 4X4 driveline. BIGFOOT 4X4 comes outfitted with a clipless BIGFOOT No. 8 body and factory-installed Extreme Heavy Duty components to take the most brutal punishment in stride. From the stadium to your own backyard, Traxxas delivers all-day fun and excitement with the new BIGFOOT 4X4 monster truck.
Extreme HD 4X4 Driveline
BIGFOOT 4X4 uses a shaft-driven four-wheel-drive system for extreme traction in any environment. A tough center driveshaft joins the front and rear steel-gear differentials to distribute the brushless motor’s massive torque. Huge Maxx-Duty driveshafts keep power flowing to BIGFOOT’s towering monster truck wheels with unrivaled durability.
BL-2s Brushless Power System
BIGFOOT’s waterproof BL-2s brushless power system ramps up the fun with more torque, faster acceleration, and less maintenance than comparable brushed power systems. The BL-2s is a model of efficiency and refinement, offering more power than before with the safety and convenience that only Traxxas can deliver.
Clipless Replica Body
BIGFOOT 4X4 comes Ready-To-Race with a beautifully detailed BIGFOOT No. 8 clipless replica body. Bright chrome bumpers stand out against the brilliant blue paint and unmistakable red and yellow stripes. BIGFOOT 4X4’s convenient hidden latching system replaces traditional body clips with clean lines and a secure hold.
Features
- Licensed BIGFOOT No. 8 Clipless Body
- Brilliant blue metallic officially licensed Ford F-150 body
- Chrome front and rear bumpers
- Holds tight for intense action
- Quick and easy removal
- BL-2s Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan (3340)
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
- LiPo battery packs: 2 cells (7.4 volts)
- 3300 Kv Brushless Motor
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 Kv
- TQ 2.4 GHz Transmitter
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- Extreme Heavy-Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Maxx-duty driveshafts
- Oversize diameter
- 6 mm axles
- Steel wheel hexes
- Chassis
- Modular composite tub design
- Secure battery hold-down latch
- High angle bumpers
- Wheelie bar
- Suspension
- HD-composite suspension arms
- Oil-filled Ultra Shocks
- White powder-coated springs
- Steering
- Chassis-mounted 2075 servo
- Dual bellcrank design with integrated servo saver
- Drivetrain
- Full-time shaft-driven four-wheel drive
- Sealed steel gear front and rear differentials
- Large 32-pitch steel spur gear
- Wheels and Tires
- Dual-profile white monster truck wheels
- Replica military-style axle hubs
- Pre-glued high profile Terra Groove shaved monster truck tires with foam inserts
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Wheelie Bar
BIGFOOT 4X4 is a wheelie machine thanks to the monstrous power of the BL-2s brushless power system. BIGFOOT’s wheelie bar offers four-position adjustments for complete wheelie control and incorporates a convenient carry handle.
Long-Travel Suspension
BIGFOOT has huge amounts of seemingly bottomless, ultra-plush suspension travel to swallow up jumps and delivers incredible control. Performance-optimized suspension components provide maximum articulation without binding or interference.
Modular Chassis
BIGFOOT’s modular design creates a chassis that's both strong and easy to maintain. The front and rear bulkheads remove easily with just a few screws. In less than a minute using a power screwdriver, you'll have full access for easy service and adjustment.
Digital High-Torque Waterproof Steering Servo
BIGFOOT’s large monster truck tires and go-anywhere capability require a steering servo that’s both strong and durable. The waterproof 2075 digital high servo provides robust steering authority with ball bearings for precise control.
Waterproof Receiver Box
BIGFOOT 4X4 incorporates a waterproof receiver box in the nose of the chassis to save weight and provide a clean, high-tech appearance. The antenna and servo wires route neatly through a patented watertight seal to protect the receiver from water. No matter what the weather, BIGFOOT is ready for action!
3-Channel Receiver with Fail-Safe Security
In the event of signal loss due to an accidental transmitter switch-off or depleted batteries, the receiver automatically returns the throttle to neutral and holds the last commanded steering position. The fail-safe programming is conveniently built-in and does not need to be activated.
Dual Bellcrank Steering with Servo Saver
BIGFOOT’s dual-bellcrank design pivots smoothly even in the harshest conditions. An integrated cam-type servo saver protects the steering servo from crash impacts without sacrificing steering precision.
Upgraded Slipper Clutch
BIGFOOT 4X4 uses an upgraded slipper clutch with larger alloy pressure plates and high-temperature aluminum pads for superior power handling. The slipper clutch delivers equal power distribution front to rear for instant throttle response through the drive system and aggressive four-wheel grip from the Sledgehammer tires.
*Click to See the Full Line of Parts/Accessories
Specifications
Length: 20.24 inches (514 mm)
Width: 13.10 inches (333 mm)
Ground Clearance: 2.44 inches (62 mm)
Weight: 5.98 pounds (2.7 kg) without batteries
Height: 8.34 inches (235 mm)
Wheelbase: 11.62 inches (295 mm)
Front Shock Length: 3.45 inches (88 mm) - Long
Rear Shock Length: 3.98 inches (101 mm) - XX-long
Tires: 2.2″ Terra Groove with foam inserts
Wheel Diameter: Dual-profile (2″ outer, 3″ inner) white monster truck
Speed Control: BL-2s electronic speed control
Motor (electric): BL-2s 3300 Kv sensorless brushless
Gear Pitch: 32 pitch
Overall Drive Ratio: 15.36:1
Differentials: Hardened steel bevel, sealed, limited slip
Chassis Structure / Material: Modular composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Dual bellcrank with integrated servo saver
Radio System: TQ 2.4 GHz (2-channel)
Servo: Waterproof 2075
Skill Level: 1
Battery Compartment (L/W/H): 162 mm x 47 mm x 26 mm
Required Batteries: 4 “AA” (transmitter), Vehicle (see battery finder)
Requires
(4) AA Batteries for Transmitter
USB-C Charging Cable and Block**
**TRA #2920 - Full charging output requires a 45 watt or greater power supply like the Traxxas 2912 and high-quality USB-C cable like the Traxxas 2916. | This is the Traxxas XRT 4WD Brushless Ready-to-Race Truck COMBO with two 4S 6700mAh batteries and the EZ-Peak Live ID DUAL OUTPUT quick charger, with TQi Traxxas Link Enabled 2.4GHz Radio System, Velineon VXL-8s brushless ESC (fwd/rev), and Traxxas Stability Management (TSM).
XRT: RACE-INSPIRED ENGINEERING - EXTREME 8S POWER AND SPEED
The Traxxas XRT fuses race-inspired design and engineering with X-Maxx power and strength. The result is an all-new platform with sharp reflexes and unprecedented stability that is capable of exploiting the upper range of extreme 8s power and speed.
BUILT FOR SPEED AND HANDLING
XRT was engineered with a focus on speed, handling, and performance. XRT’s low center of gravity, ultra-wide stance and low-profile body deliver confidence and control as XRT accelerates across the wide-open spaces to an all-out speed of 60+MPH.
PROVEN TOUGH ALL-METAL DRIVELINE
XRT performance and durability begins with its all-metal 8s driveline. Steel 4-gear differentials and steel driveshafts are joined by a high-strength extruded aluminum center shaft. It’s a precision-engineered recipe that has been proven monster-truck tough in the X-Maxx.
RACE-INSPIRED LOW-CG CHASSIS
XRT’s performance-focused chassis design is configured to lower the center of gravity for superior handling and stability. The dual 6700 4s batteries and the steering servo are positioned to place the weight as low as possible in the chassis and provide protection for these critical components.
PATENT-PENDING CLIPLESS BODY
XRT’s patent-pending clipless body easily removes and installs in just seconds and yet it locks in place with incredible strength and security. The system uses a cage inside the body to minimize flex while external skids are strategically placed to protect the body.
GRAVIX RACE TIRES
XRT’s Gravix race tires are a revolutionary new hybrid design with densely packed biting edges and sipes. They deliver outstanding grip on hard-packed surfaces along with fast and quiet-running precision.
VXL-8S POWER SYSTEM
Already Traxxas’ most powerful speed control, XRT’s VXL-8s goes even further with an aggressive tune that maximizes power output across the entire RPM range. More power under the curve delivers mid-range punch that hits hard for rolling wheelies on demand. Bury the throttle at any speed and XRT responds instantly with effortless acceleration.
Features
- VXL-8s Waterproof Electronic Speed Control
- Aggressive tuning for more power at any RPM
- 8s LiPo compatible
- Built-in cooling fan
- Real-time telemetry via Traxxas Link
- Machined heat sinks
- 10-gauge silicone wire
- Integrated protection circuits
- LED status lights
- Velineon 1200XL Brushless Motor
- “Big Block” brushless motor
- 4-pole 1275 kV
- 5mm output shaft
- Oversize aluminum heatsink for improved cooling
- Dual cooling fans
- Up to 60+ mph with Two 4s LiPo Batteries and Included Optional Speed Gear
- Traxxas Stability Management (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- TQi 2.4GHz High Output Radio System
- TQi 2-channel transmitter
- Automatically stores and loads settings for up to 30 Traxxas
- Link-enabled models
- Programmable multi-function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- High 13ms frame rate and near-zero latency for responsive control
- 5-channel micro receiver (#6533) with fail-safe security
- Patented waterproof receiver box with easy-access plug
- X-Maxx Spec 8s Drivetrain
- Full-time shaft-driven 4-wheel drive
- Heavy-duty steel CV driveshafts & axles
- Splined aluminum center driveshaft
- Fully machined aluminum stub axles
- Transmission
- Mod-1 steel pinion and spur gears
- Fixed gear mesh system
- Torque-Biasing Center Drive
- X-Maxx Spec 8s Differentials
- Heavy-duty sealed 4-gear design
- Large scale steel ring and pinion gears
- Splined outdrives attached with external thru-bolt method
- Reinforced bulkhead and covers increase bearing support
- Rock-Solid Motor Mounting System
- Precise preset gear mesh adjustments
- 4 keyed pins lock the motor in place
- Motor retention separate from gear mesh
- GTX Race Shocks
- Machined aluminum threaded body
- Extra-large bore and capacity
- 5.2mm damper shaft
- Lower seal cartridge includes integrated wiper seal combination
- Height-adjustable spring retainer
- Heavy-duty composite shock caps with pivot balls
- Lower spring perches bolted on
- WideMaxx Suspension
- Extra-wide suspension arms
- Made from heavy-duty cold-weather composite
- Performance-optimized geometry
- Double-shear connections
- High-strength steel suspension pins with retainers
- 4mm machined pivot balls
- Fixed high-strength camber and toe links
- Heavy-duty steering blocks and axle carriers
- Oversized wheel bearings
- Low-CG Chassis Design
- Modular chassis with interlocking bulkheads
- Low center of gravity for improved handling
- Flat bottom design
- Heavy-duty interlocking skid plates
- High-strength buttressing on shock towers
- Dual snap-lock battery compartments
- Protects batteries from side impacts
- Allows secondary battery-clip security
- Interlocking components for tight tolerances
- Wire management for clean appearance
- Patent-Pending Clipless Body
- Snaps in place in just seconds
- Secure body latches are easy to use
- Rigid internal frame
- Dual cold-air intakes
- Molded body reinforcements for tear-through protection
- Protective top skids
- Rugged high-downforce rear wing
- Heavy-Duty Bumpers
- Reinforced front bumper and rear wing support
- Absorb impact forces while retaining shape
- Nerf bars for side impact resistance
- Heavy-duty wheelie bar with carry handle
- Wheels and Tires
- 7.4" Gravix race tires
- Low sidewall for sharp turn-in response
- Thick center carcass resists ballooning at high speed
- Lower rotational mass for faster acceleration
- 4.0" matte black XRT race wheels
- High-strength glue and bead design
- Huge 24mm splined wheel hubs
- Steering
- Powerful 365 oz-in steering servo
- Heavy-duty cam-style servo saver
- Dirt evacuation channels
- Fully waterproof
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
High-Downforce Wing
XRT's rear wing provides added stability for 60+mph speed runs and integrates neatly with the clipless body for a sophisticated look. The wing mount soaks up even the hardest landings without transferring shock energy to the chassis.
Integrated Cold-Air Intakes
Cold-air intakes are fully integrated into XRT's clipless body frame for maximum strength and tear prevention. The lower intake even features an internal grille to keep rocks and other debris out of the chassis and away from the steering components.
Integrated Shock Tower Design
XRT's shock towers are an integral part of the frame with massive buttresses to dissipate shock loads throughout the chassis. Heavy-duty receivers secure the clipless body latches directly to the towers for maximum strength.
Rugged Top Skids
XRT's rugged top skids protect the clipless body from damage. Internal reinforcements maintain the body's integrity.
Integrated Wheelie Bar
XRT's wheelie bar helps prevent backflips under full-throttleacceleration and flexes to absorb impacts on less-than-perfect landings. The integrated wheelie bar also functions as a convenient handle to transport XRT to your next adventure.
Aluminum Heatsink with Dual Fans
XRT's aluminum heatsink wraps around nearly 75% of the motor's exposed surface to pull out more heat. Dual electric fan shrouds draw cooling air from the body vents through the oversized fins for more effective cooling performance and longer run times.
Rugged Skid Plates
XRT's three rugged skid plates key together tightly to protect the chassis from damage. The front skid plate was designed at just the right angle to kick the front end up and prevent digging into the ground when landing nose down.
Specifications
Length (including wing): 31.41 inches (798mm)
Front Track: 23.43 inches (595mm)
Rear Track: 23.43 inches (595mm)
Ground Clearance: 1.93 inches (49mm)
Weight: 19.70 pounds (8.94kgs) - without body
21.03 pounds (9.54kgs) - with body
23.87 pounds (10.83kgs) - with body & two 4s 6700mAh LiPos
Height: 10.15 inches (258mm) - ride height
12.12 inches (308mm) - full droop
Wheelbase: 18.9 inches (480mm)
Shock Length (front): 6.79 inches (173mm)
Shock Length (rear): 6.79 inches (173mm)
Tires (Pre-Glued): 7.4 x 4.0 inches (188mm x 102mm)
Wheels: 4.3 x 5.7 inches (110mm x 147mm)
Speed Control: Velineon VXL-8s
Motor (electric): Velineon 1200XL Brushless with heat sink and dual fan shrouds
Overall Drive Ratio: 20.6:1 (20/50 motor pinion and spur gear)
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch (Spur and Pinion): Module 1.0
Chassis Structure/Material: Composite Nylon Tub
Brake Type: Electronic
Drive System: Shaft-driven 4WD
Steering: Bellcrank
Radio System: TQi 2.4GHz Transmitter with TSM receiver
Servo: Torque: 365oz. Speed: 0.17 sec/ 60 degrees(6.0V)
Top Speed: 60+ MPH with two 4s LiPo batteries and included optional gearing
Skill Level: 5
Battery Tray: 186mm x 51mm x 44mm
Requires
(4) AA batteries for the transmitter
| This Combo Includes:
Traxxas Rustler 4x4 VXL Truck
EZ-Peak ID LiPo Charger
11.1V 3S 4000mAh LiPo Battery
This is the Traxxas Rustler 4X4 VXL Brushlessfully-assembled, waterproof electronics, Ready-To-Race, with TQi 2.4 GHz 2-channel radio system, TSM, Extreme Heavy Duty Kit, VXL-3s brushless power system, and clipless painted ProGraphix body.
Rustler 4X4 VXL - The Stadium Truck Redefined
Extreme 4X4 stadium truck speed and excitement now equipped with the Extreme Heavy Duty upgrade kit.Rustler 4X4 VXL is a hard-charging wheelie machine that captures the speed and style of a stadium truck and injects it with a massive dose of strength and power. Beneath Rustler’s clipless body, the extreme Velineon brushless power system feeds power through the factory-installed Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability.
EXTREME HEAVY DUTY UPGRADE KIT
Rustler 4X4 VXL’s factory-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Rustler.
SELF-RIGHTING
Rustler 4X4 VXL uses Traxxas’ patented self-righting feature to keep the fun going, even when you get carried away with the wheelies or land that big trick upside down. Simply press a button on the TQi transmitter and, in most circumstances*, Rustler 4X4 VXL will be back on its wheels in just seconds and ready for more action! *3s power recommended for optimal performance
CLIPLESS BODY MOUNTING
Rustler 4X4 VXL uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. The sleek, aerodynamic body features a rugged internal structure and external rollover protection for long life and Traxxas-Tough durability.
Features
- Clipless ProGraphix Body
- Easy one-handed removal
- Reinforced inner cage
- Strong oversized latch
- Rugged roof rollover protector
- Molded composite plastic wing
- Extreme Heavy Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Maxx duty driveshafts
- Oversize diameter
- 6 mm axles
- Steel wheel hexes
- TQi 2.4 GHz High Output Radio System
- TQi 2-channel transmitter
- 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Compatible with optional TQi Traxxas Link Wireless Module
- (6511) to access full Traxxas Link app functionality (sold separately)
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
- Programmable multi-function knob
- Patented waterproof receiver box
- VXL-3s Waterproof Electronic Speed Control
- Three programmable drive profiles:
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Large heat sink
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-9 cells (7.2 to 10.8 volts)
- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
- Velineon Brushless Motor
- Ultra high-temperature sintered Neodymium magnets
- Low-maintenance design
- Efficient, high-speed ball bearings
- Precision-balanced rotor
- 3500 kV
- Brilliant blue-anodized finish
- Traxxas Stability Management (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Maintains steering composure to allow throttle-on powerslides
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- Chassis
- Low-CG design for responsive handling
- Modular composite tub design
- Latching battery hold-down
- Reinforced integrated wheelie bar
- High-approach front bumper to climb curbs
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Oil-filled steel gear front and rear differentials
- Large 32-pitch gearing
- Torque Control heavy-duty slipper clutch with aluminum pads
- Anodized-aluminum center driveshaft
- Steering
- Chassis-mounted 2075 servo
- Dual bellcrank design with integrated servo saver
- Suspension
- Adjustable 4 mm steel toe and camber links
- HD suspension arms
- Oil-filled Ultra Shocks
- Rugged front and rear shock towers
- White powder-coated springs
- Wheels and Tires
- Large 2.8″ black chrome wheels
- Talon EXT tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Modular Chassis
Rustler 4X4' s modular chassis features front and rear bulkheads that remove easily with just a few screws. In less than a minute using a power screwdriver, you’ll have full access for easy service and adjustment.
Velineon 3500 Motor
A sensorless Velineon 3500 kV motor delivers extreme performance with nearly zero maintenance. Ultra high-temperature Neodymium magnets, high-speed bearings, and a precision, 4-pole balanced rotor deliver smooth running and long life.
VXL-3s
The waterproof Velineon VXL-3s speed control is packed with technology to deliver maximum power. Large heat sink, integrated on/off switch, and three programmable drive profiles top the feature list. Two-stage low voltage detection allows full LiPo compatibility, including powerful 11.1-volt 3s packs!
Waterproof Receiver Box
Rustler's innovative waterproof receiver box allows easy access to the receiver. The antenna and servo wires route neatly through a patented watertight seal to protect the receiver from water. No matter what the weather, Rustler 4X4 is ready for action!
5-Channel Receiver with Failsafe
The TQi 2.4 GHz radio system stores up to thirty models in memory, allowing you to use one transmitter for your entire RC garage. Integrated telemetry ports in the receiver transmit real-time data to the TQi transmitter when using the Traxxas Link App and telemetry sensors (sold separately). In the event of signal loss, the receiver automatically returns the throttle to neutral and holds the last steering position.
Talon EXT 2.8" Tires and Black Chrome Wheels
Rustler's large 2.8" black chrome wheels provide terrain-conquering ground clearance and a commanding presence. Talon EXT tires have a square-shouldered, aggressive tread design to dig into gravel, dirt, and grass for incredible 4X4 traction and huge roost.
Ultra Shock
Oil-filled Ultra Shocks utilize dual X-ring technology for a perfect seal and silky-smooth performance. The large oil capacity and rugged design soaks up big jumps and off-road abuse for smooth driving performance. They are easy to tune with a wide range of available oils, springs, and pistons.
Digital High-Torque Waterproof Steering Servo
Rustler 4X4 VXL's extreme speed and quick reflexes require a steering servo that's both strong and fast. The included digital high-speed, high-torque servo features ball bearings for precise control and quick reflexes.
Heavy-Duty Suspension Arms
Heavy-duty suspension arms are stronger than ever before. Molded from a tough new composite material, the arms stand up to even the most punishing drivers and resist breakage for non-stop fun behind the wheel.
Extruded Aluminum Driveshaft
A one-piece extruded aluminum driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies. Altogether, this shaft runs straight and true for ultra-smooth driveline operation.
Maxx-Duty Driveshafts
Rustler 4X4’s Maxx-duty driveshafts with beefed-up U-joints are built to handle brushless power without breaking a sweat. Large 6 mm axles key into the included steel wheel hexes for unmatched strength and durability.
Heavy-Duty 4 mm Turnbuckles
Rustler 4X4 uses the same heavy-duty steel 4 mm turnbuckles developed for the Slash 4X4. Broad flat sections make toe and camber adjustments easy with the included wrench. The fully captured rod ends take a beating and won't pop apart during rigorous off-road pounding.
Functional Rear Wing
The functional rear wing reduces drag while still providing valuable downforce for high speed stability. The wing mounts directly to the internal body reinforcements for lasting durability.
Specifications
Length: 18.78 inches (477 mm)
Width: 12.94 inches (329 mm)
Ground Clearance: 1.1 inches (27 mm)
Weight: 5.12 pounds (2.32 kg)
Height: 6.35 inches (161 mm)
Wheelbase: 11.62 inches (295 mm)
Front Shock Length: Long
Rear Shock Length: XX-long
Tires (pre-glued): 4.5″ x 2.3″ (114 mm x 58 mm) Talon EXT
Wheels: 2.8 inches (71 mm) black chrome
Speed Control: VXL-3s
Motor (electric): Velineon 3500 brushless
Transmission: Single speed
Overall Drive Ratio: 13.97:1
Differentials: Sealed, 2-gear
Chassis Structure / Material: Composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Bellcrank with integrated servo saver
Radio System: TQi 2.4 GHz 2-ch transmitter with 6533 TSM receiver
Servo: Waterproof 2075
Top Speed (optional gearing): 65+ mph with 3-cell LiPo and 20/54 gearing (TRA3950X and TRA3956)
Skill Level: 1
Battery Compartment: 162 mm x 50mm x 25 mm
Requires
(4) AA Batteries for transmitter
| This is the Traxxas Sledge with dual LiPo batteries & EZ-Peak Dual ID charger included! Out of the box, this setup will be ready for up to 70+MPH speeds* and the ultimate bashing versatility.
The Traxxas Sledge 1/8 scale 4WD brushless monster truck. Fully assembled, Ready-To-Race, with TQi 2.4GHz radio system, VXL-6s brushless power system, Belted Sledgehammer Tires and ProGraphix clipless body.
The new 6S Sledge has been beefed up with Belted Sledgehammer Tires and Color-Matched Blue, Red, Green, and Orange Aluminum Parts.
Belted Sledgehammer Tires
Explore Sledge’s top speed with confidence and control. New belted Sledgehammer tires provide more precise feel, with instant response to control inputs. Traxxas' belting process results in less tire distortion, allowing Sledge to feel even faster with a larger, more consistent contact patch on the ground.
Game-Changing Stability
Experience the full power of Sledge in a whole new way. Traxxas belted tires resist ballooning to provide ultimate stability and control at high speeds.
Geared For Belted Tires
With new belted tires, hardened steel 15/52 gearing is now standard to maintain the incredible speed and relentless acceleration Sledge is known for.
Color-Matched Aluminum
All-new graphics are available in four colors with color-matched aluminum chassis, shocks, wheel hubs, shock towers, tie bars, T-bar, and more.
Features
- VXL-6s Waterproof Electronic Speed Control
- 6s LiPo compatible
- Integrated cooling fan
- Real-time telemetry via Traxxas Link
- 3-LED status indicators
- Powered accessory ports
- 10-gauge silicone wire
- Integrated protection circuits
- Velineon 2000 kV Brushless Motor
- 4-pole 2000 kV
- 5 mm output shaft
- Finned can for better heat dissipation
- Aluminum motor cradle mount
- Supports entire motor length
- Reduces flex for longer gear life
- Up to 70+ mph with Two 3s LiPo Batteries (sold separately)
- Traxxas Stability Management
- Helps prevents spinouts and loss of control
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- TQi 2.4 GHz High Output Radio System
- TQi 2-channel transmitter
- Traxxas Link enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Programmable Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Drivetrain
- Full-time 4-wheel drive
- Heavy-duty steel driveshafts
- Large 8 mm steel stub axles
- Steel dogbone center driveline
- Protective rubber boots on differential inputs
- Transmission
- Mod-1 pinion and spur gears
- Fixed gear mesh system
- Torque-Biasing Center Drive
- Differentials
- Heavy-duty sealed 4-gear design
- Large scale steel ring and pinion gears
- Large 8 mm output shafts
- Steel drive cups
- Easy access bulkheads
- GT-Maxx Shocks
- Longer rear shocks for more travel
- Machined aluminum threaded body
- Extra-large bore and capacity
- Large-diameter damper shaft
- Lower seal cartridge with dual X-rings
- Height-adjustable spring retainer
- Lower spring perches bolted on
- Suspension
- Thick 5 mm 6061-T6 aluminum shock towers
- Ultra-tough composite arms
- Made from our strongest cold-weather material
- Molded insert for clean look
- Rear rock deflectors
- Press-in hinge pins to reduce play
- Oversize molded toe and camber links
- Heavy-duty C-hubs with oversize bearings
- Multiple mounting points for suspension tuning
- Chassis
- 3.2 mm ribbed aluminum chassis
- Formed edges for improved strength
- Thick aluminum T-Bar for added rigidity
- High-strength buttressing on shock towers
- Rugged locking battery compartment with quick-release door
- Low-CG design for improved handling
- Interlocking components for tight tolerances
- Tough front and rear bumpers double as skid plates
- Hidden wire management for clean appearance
- Clipless ProGraphix Body
- One-handed clipless body mounting system
- Rigid internal frame
- Molded body reinforcements for tear-through protection
- Protective roof skids
- Rugged high-downforce rear wing
- Steering
- Waterproof 2275 metal gear servo
- High-throw bellcrank steering design
- Heavy-duty servo saver with aluminum posts
- Metal servo horn
- Wheels and Tires
- Huge 6.7″ Sledgehammer all-terrain tires
- Belted carcass resists ballooning
- Tough 3.8″ black wheels
- Splined 17 mm aluminum axle hubs
*Click to See the Full Line of Parts/Accessories
SPECIFICATIONS
Length: 23.78 inches (604 mm including wing)
Width: 18.10 inches (459 mm)
Front Track: 18.10 inches (459 mm)
Rear Track: 18.10 inches (459 mm)
Height: 8.43 inches (214 mm)
Wheelbase: 15.10 inches (384 mm)
Center Ground Clearance: 1.95 inches (50 mm)
Drivetrain: Shaft-driven 4WD
Transmission: Single speed
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch: 1.0 metric pitch
Servo(s): 2275 digital metal-gear waterproof (347 oz-in)
Radio System: TQi 2.4 GHz 2-channel transmitter with TSM receiver
Battery Compartment Specs: 181 mm X 54 mm X 45 mm
Model Speed: 70+ mph with 6s LiPo battery and optional gearing*
**Optional Gearing Need for Top Speeds:
65+ - 16-T Pinion / 52 Tooth Spur (TRA6489X & TRA9652)
70+ - 18-T Pinion / 46 Tooth Spur (TRA6491R & TRA9651)
Model Skill Level: 4
Scale: 1/8
Weight: 12.74 lbs (5.77 kg)
REQUIRES
(4) AA alkaline batteries for the transmitter. | This is the Traxxas Slash Modified 1/10 Ready-To-Race 2WD Dirt Oval Race Truck with Waterproof Electronics, TQ 2.4 GHz 2-Channel Radio System, BL-2s Brushless Power System, and Clipless Painted Body.
This Combo Includes: Traxxas Slash Modified Brushless Racing Truck EZ-Peak ID LiPo Charger 7.4V 2S 5200mAh HardCase LiPo Battery
Competition Ready
The Slash Modified dirt oval racer is engineered to deliver competition-tuned track performance right out of the box. Slash’s already legendary durability has been enhanced with new Extreme Heavy Duty suspension components and performance upgrades such as aluminum GTR shocks, Magnum 272R transmission, tough clipless body, and the fast and reliable BL-2s brushless power system.
BL-2s Brushless Power System
The BL-2s brushless power system delivers more speed, quicker acceleration, and a more responsive throttle. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Slash Modified to run battery after battery for all-day race sessions. With no brushes to wear out, the BL-2s 3300 Kv motor can last the entire racing season with minimal maintenance.
Extreme Heavy Duty Components
Extreme Heavy Duty components come factory-installed on Slash Modified for game-changing durability. Key drivetrain and suspension components are beefed-up with extra material for ultimate strength. From HD suspension arms to the upgraded axles, Slash Modified gets you to the finish line no matter how rough the racing action gets.
Pro Series Magnum 272R Transmission
The Magnum 272R transmission maximizes racing performance and durability for hard-hitting torque of brushless power systems. The 272R features an aluminum motor plate, all-metal gears, and a sealed silicone-filled 4-gear differential. The low-CG design concentrates weight as low as possible over the rear axle for improved traction and handling.
Clipless Race Body
Slash Modified comes Ready-To-Race with a clipless body that requires no assembly and exceeds even the best custom designs. A heavily reinforced internal cage utilizes robust top and side bracing to ward off crash damage and protect the rear tires. Traxxas clipless technology holds the body firmly in place from start to finish with quick and easy removal on the pit bench.
Replica Hoosier Tires
Replica Hoosier Angle Block tires come mounted to graphite gray “steelie” wheels for an authentic race-prepped look. The tires are molded in a special rubber compound that balances durability and traction for consistent performance lap after lap. The large tread block design utilizes aggressive siping for maximum grip and predictable handling at the limit.
Aluminum GTR Shocks
GTR shocks represent the peak of racing technology. The color-matched PTFE-coated aluminum shock bodies hold over 70% more oil than Ultra Shocks and their slick titanium-nitride coated shafts resist scuffing, increase durability, and eliminate “stiction.” X-ring seals keep oil in and dirt out for smooth, consistent damping, and plush suspension action. Spring preload and ride height changes are as simple as turning the threaded collars.
Features
- Clipless Race Body
- Tough front and rear tube-style bumpers
- Body reinforcements to prevent pull-through damage
- Roll cage with molded driver figure
- Holds tight for intense action
- Quick and easy removal
- Smooth appearance with no body posts or clips
- Full-width molded rear wing
- Extreme Heavy Duty Upgrade Parts Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Extreme heavy duty driveshafts
- BL-2s Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan (3340)
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
- LiPo battery packs: 2 cells (7.4 volts)
- 3300 Kv Brushless Motor
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 Kv
- TQ 2.4 GHz Transmitter
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- Magnum 272R Transmission
- Heavy duty low-CG case
- Thick 3.2 mm aluminum motor plate
- Case supported bearings
- Fixed gear mesh
- High-strength steel gears
- Sealed bevel-gear differential
- Easy differential access
- Steering
- Chassis-mounted 2075 servo
- Dual bellcrank design with integrated servo saver
- Low-CG Chassis
- Modular composite tub design
- Secure battery hold-down
- Side nerf bars for impact resistance
- Suspension
- Heavy duty suspension arms
- 4 mm adjustable steel turnbuckles
- Captured links won’t pop off
- Aluminum PTFE-coated GTR Shocks
- Titanium nitride coated shafts
- 70% more oil capacity than standard Ultra Shocks
- Threaded bodies with adjustable spring collars
- Drivetrain
- Extreme Heavy Duty driveshafts
- Torque Control slipper clutch
- Wheels and Tires
- Graphite gray "steelie" dirt oval wheels
- 2.2″ outer diameter, 3″ inner diameter
- Licensed Hoosier Angle Block racing tires
- Wide tread blocks for consistent and predictable performance
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Built Slash Tough
When it comes to RC racing, Slash Modified stands alone at the pinnacle of performance and durability. Rugged fenders and nerf bars protect the rear wheels for realistic fender-to-fender racing action with strong roof reinforcements for rollover protection. Thick front and rear tube bumpers protect Slash Modified from impacts on and off the track.
Realistic Oval-Track Body
Slash Modified is Ready-To-Race right out of the box with fully formed Midwest Modified-style dirt oval body. A realistic roll cage surrounds the driver figure and supports the roof in case of rollovers. Rugged tube-style bumpers protect the front and rear against racing incidents and an adjustable molded rear wing provides both downforce and additional full-width body support.
Extreme Heavy Duty Driveshafts
Slash Modified uses high-performance telescoping driveshafts designed for increased strength and articulation. Traxxas U-joint driveshafts allow for maximum suspension movement resulting in longer travel and tighter turning.
Low-CG Chassis
An innovative low-CG chassis positions weight down low for aggressive handling. A wide track and long wheelbase keep Slash Modified planted in the turns to provide the perfect balance of stability and quick responses.
Waterproof Receiver Box
A sealed receiver box gives you the freedom to practice your racing skills regardless of the weather. The antenna and servo wires route neatly through a patented watertight seal. A blue O-ring seals the receiver box to protect the receiver from water.
3-Channel Receiver with Fail-Safe Security
In the event of signal loss due to an accidental transmitter switch-off or depleted batteries, the receiver automatically returns the throttle to neutral and holds the last commanded steering position. The fail-safe programming is conveniently built-in and does not need to be activated.
High Torque Steering Servo
A race truck needs a powerful steering servo for responsive performance. The waterproof steering servo (2075) uses O-ring seals to keep the fun going when things get wet. The Traxxas digital high-torque servo provides precise steering authority and speed for wheel-to-wheel racing at the track.
Torque Control Slipper Clutch
Semi-metallic pads and finned aluminum alloy pressure plates dissipate heat and provide consistent traction. The semi-metallic friction material remains stable across a wide temperature range to provide smooth, linear engagement. Spur gears can be removed and replaced without altering the slipper adjustment.
All-Metal Internal Gears
Slash Modified's race-ready Magnum 272R transmission is built for massive torque with high-strength steel input, idler, and differential gears and large-diameter bearings. The input gear is keyed and press fit onto the top shaft for greater precision and strength than a pin-mounted gear.
Specifications
Length: 25.8 inches (656 mm)
Front Track:,12.3 inches (313 mm)
Rear Track: 12.3 inches (313 mm)
Ground Clearance: 1.38 inches (35 mm)
Weight (no battery): 5.62 pounds (2.55 kg)
Height (overall): 8.52 inches (216 mm)
Wheelbase: 13.1 inches (333 mm)
Shock Length (front): 3.45 inches (88 mm) - Long
Shock Length (rear): 3.98 inches (101 mm) - XX-Long
Tires: Licensed Hoosier Angle Block racing tires
Tire Diameter: 4.3 inches (109 mm)
Wheels (front/rear): Graphite gray "steelie" wheels
Wheel Diameter: 2.2 inches (56 mm) (outer)
3.0 inches (76 mm) (inner)
Speed Control: BL-2s electronic speed control
Motor (electric): BL-2s 3300 Kv sensorless brushless
Overall Drive Ratio: 9.10:1
Differential Type: Sealed, hardened steel bevel, limited slip
Gear Pitch: 48
Chassis Structure/Material: Composite tub
Drive System: 2WD
Steering: Dual-bellcrank with integrated servo saver
Radio System: TQ 2.4 GHz (2-channel)
Servo: Waterproof digital 2075 servo (125 oz-in torque)
Skill Level: 1
Battery Compartment (L/W/H): 165 mm (6.49″) x 50 mm (1.95″) x 23/25 mm (1.02″/0.90″)
Requires
(4) AA Batteries for transmitter
|
Rating & Review
There are no reviews yet.