| Content | This is the Traxxas Rustler XL-5 Ready-to-Run 1/10 Scale Electric Stadium Truck with the ID Battery and USB-C charger. The truck comes with the 3000mAh 7-Cell 8.4V flat battery pack with ID connector, 4-Amp USB-C fast charger, and waterproof electronics on the truck. These are great trucks for people new to R/C, and they are a great way for kids to get involved. This is one of the best beginner trucks we have and they are an unbelievable value. These make an excellent gift!
Traxxas Rustler XL-5
High Performance Stadium Truck
Traxxas Rustler sits low and wide for maximum high-speed stability, with fast reflexes and an agile feel not found on other trucks. New factory-installed heavy duty suspension components allow Rustler to push the performance envelope to the extreme with next-level durability. Rustler delivers power-sliding, full-throttle fun and a blistering 35+ MPH top speed in a Ready-to-Race package backed by Traxxas’ legendary innovation.
Traxxas Rustler XL-5 Now Includes
Extreme HD Components
Rustler delivers game-changing durability with its factory-installed Extreme Heavy Duty suspension components. Key components have been redesigned and beefed-up with extra material to ensure Rustler takes even the most brutal punishment in stride. From full-send sessions at the skate park to backyard bashing, no stadium truck delivers more thills than Rustler.
Clipless Body Mounting
Rustler's clipless body holds firm no matter how rough the action gets. Heavy duty latches grip the body tightly, but release in just seconds for fast battery swaps. This convenient hidden latching system replaces traditional body clips with reinforced panels to maintain body integrity and resist pull-through damage.
Features
- Clipless Stadium Truck Body
- Pre-painted body with applied decals
- Aggressive, aerodynamic body with rear wing
- Body reinforcements to prevent pull-through damage
- Holds tight for intense action
- Quick and easy removal
- Smooth appearance with no body posts or clips
- High-Performance Waterproof XL-5 Electronic Speed Control
- Innovative waterproof design
- Three drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode - 50% forward / brake / 50% reverse (patented)
- Traxxas EZ-Set one-button setup
- LiPo and NiMH compatible with two-stage low-voltage detection
- Titan 550 Motor
- Powerful Titan 12T 550 brushed motor with internal cooling fan
- Oversized armature for big torque and increased power handling
- Virtually maintenance-free operation
- Extreme Heavy Duty Parts Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- HD suspension arms
- TQ 2.4 GHz 2-Channel Radio System
- Ergonomic transmitter with internal antenna
- Traxxas 6519 3-channel micro receiver with fail-safe security
- Sealed watertight receiver box keeps the receiver dry
- Includes Battery and USB-C Charger
- 4-amp USB-C fast charger
- 3000 mAh Traxxas 7-cell 8.4 V NiMH battery with iD
- Easy Access Battery Compartment
- Accepts NiMH 6 and 7-cell flat packs and hump packs
- Accepts 2-cell LiPo batteries
- Transmission and Driveline
- Brushless-ready Magnum 272 metal-gear transmission
- Torque-Control slipper clutch system
- Planetary gear differential with steel ring gear
- Sealed gearbox protects the transmission with beefed up motor guard
- External gear cover with easy clutch access
- Heavy-duty telescoping U-joint driveshafts and yokes
- Tough Fiber-Composite Monocoque Chassis
- Wide, low-profile design for increased stabilit
- Steering
- High-torque waterproof Traxxas 2056 steering servo
- Spring-loaded servo saver helps protect against impacts
- Suspension
- Durable solid camber links eliminate the need for adjustment
- Captured rod ends won't pop off
- Springs and Shocks
- Fully adjustable oil-filled Ultra Shocks with X-ring technology
- White powder-coated springs
- Wheels and Tires
- Pre-glued Alias step-pin rear tires and ribbed front tires with performance foam inserts
- 2.8″ black six-spoke wheels with chrome beadlock trim
- Precision Hex Hardware
Modified Muscle
The Titan 12T 550 motor pumps out incredible power with an integrated cooling fan to keep temperatures down. The XL-5 Electronic Speed Control provides smooth, reliable power delivery with EZ-Set one-button setup and three different drive profiles.
Battery and Charger Included
Rustler includes a powerful 8.4 volt 3000 mAh Traxxas Power Cell rechargeable NiMH battery pack to reach its 35+ mph top speed. Fast 4-amp charging is available virtually anywhere thanks to the included 45+ watt USB-C battery charger with iD technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time.
Specifications
Length: 18.1 inches (445 mm)
Front Track: 12.25 inches (311 mm)
Rear Track: 12.25 inches (311 mm)
Weight: 59.6 ounces (1.69 kg)
Height (overall): 7 inches (178 mm)
Wheelbase: 11.4 inches (289 mm)
Front Shock Length: Long
Rear Shock Length: XX-long
Front Tires (pre-glued):Alias ribbed 2.8″
Rear Tires (pre-glued): Alias Step-Pin 2.8″
Front Wheels: 2.8″ Black and chrome 6-spoke
Rear Wheels: 2.8″ Black and chrome 6-spoke
Electronic Speed Control:XL-5 electronic speed control
Motor (electric): Titan 12-turn 550
Steering Servo: 2056 high torque waterproof
Transmitter: TQ 2.4 GHz radio
Receiver: 6519 TQ 3-channel
Gear Ratio (internal): 2.72 (final drive: 10.17)
Differential Type: Planetary
Gear Pitch: 48 pitch
Transmission: Magnum 272
Steering: Bellcrank
Chassis Type: Modified tub
Chassis Material: Composite Nylon
Top-Speed: 35+ mph**
Skill Level: 1
*Battery Tray Dimensions: 166 mm x 48 mm x 28 mm
Included Charger: Traxxas 4-amp USB-C fast charger
Included Batteries: Traxxas Power Cell 3000 mAh, 8.4 V, NiMH battery with iD
*Battery expansion kit available (3725X)
**With 7-cell battery and included optional 28-tooth pinion gear
Requires
(4) AA Batteries for Transmitter
USB-C Charging Cable and Block | This Combo Includes:
Traxxas Stampede 4X4 Brushless Truck
EZ-Peak ID LiPo Charger
7.4V 2S 5800mAh LiPo Battery
This is the Traxxas Stampede 4X4 Brushless Ready-to-Run Waterproof Radio Controlled Monster Truck 2S Lipo Combo with 5800mAh 2S LiPo, EZ-Peak ID Charger, with clipless body, extended chassis, Extreme Heavy Duty Upgrade Kit, BL-2s Brushless power system and the TQ 2.4GHz Radio System (Traxxas Bluetooth Link Module Compatible - Module sold separately).
Stampede 4X4 Brushless
Bigger and Stronger Then Ever!
Stampede 4X4 is bigger and badder than ever with a new clipless body, extended chassis, and huge 5.3″ Sledgehammer tires for an aggressive monster truck stance. Stampede’s all-new BL-2s brushless power system delivers effortless power for all-day fun with an added boost of torque for terrain-shredding burnouts and powerful acceleration. Stampede 4X4 also comes standard with Traxxas’ Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability.
NEW BL-2S BRUSHLESS POWER SYSTEM
Stampede 4X4’s BL-2s brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Stampede 4X4 to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 kV is long-lasting and requires virtually no maintenance.
EXTREME HEAVY DUTY UPGRADE KIT
Stampede 4X4’s pre-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.
CLIPLESS BODY MOUNTING
Stampede 4X4 now uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. A rugged internal cage attaches to the body with molded reinforcements to prevent pull-through damage. Tough roof and tailgate skids protect the body in the event of a rollover.
Features
- BL-2s Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan (#3340)
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
- LiPo battery packs: 2 cells (7.4 volts)
- 3300 kV Brushless Motor
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 kV
- TQ 2.4 GHz Transmitter
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- Extreme Heavy-Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Extreme heavy-duty driveshafts
- Oversize diameter
- 6mm axles
- Steel wheel hexes
- Clipless ProGraphix Body
- Tough reinforced bumpers
- Reinforced inner cage
- Rugged roof rollover protector
- Tailgate protector
- Holds tight for intense action
- Quick and easy removal
- Chassis
- Modular composite tub design
- Secure battery hold-down latch
- High angle bumpers
- Suspension
- HD-composite suspension arms
- Oil-filled Ultra Shocks
- White powder-coated springs
- Steering
- Chassis-mounted #2075 servo
- Dual bellcrank design with integrated servo saver
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Oil-filled steel gear front and rear differentials
- Large 32-pitch steel spur gear
- Wheels and Tires
- Large 2.8” graphite gray wheels
- Tall 5.3” Sledgehammer tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Specifications
Length: 17.87 inches (454mm)
Width: 13.10 inches (333mm)
Ground Clearance: 2.44 inches (62mm)
Weight: 5.98 pounds (2.7kg) without batteries
Height: 8.34 inches (212mm)
Wheelbase: 11.62 inches (295mm)
Front Shock Length: 3.45 inches (88mm) - Long
Rear Shock Length: 3.98 inches (101mm) - XX-Long
Tires (pre-glued): 5.3 inches (133mm) tall Sledgehammer
Wheels: 2.8 inches (71mm) graphite gray wheels
Speed Control: BL-2s electronic speed control
Motor (electric): BL-2s 3300 kV sensorless brushless
Gear Pitch: 32
Overall Drive Ratio: 15.36:1
Differentials: Hardened steel bevel, sealed, limited slip
Chassis Structure / Material: Modular composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Dual bellcrank with integrated servo saver
Radio System: TQ 2.4 GHz (2-channel)
Servo: Waterproof #2075
Skill Level: 1
Battery Compartment (L/W/H): 162mm x 47mm x 26mm
Requires
(4) AA Batteries for transmitter | This is the Traxxas Stampede XL-5 Ready-to-Run 1/10 Scale Monster Truck with the ID Battery and USB-C charger. The truck comes with the 3000mAh 7-Cell 8.4V flat battery pack with ID connector, 4-Amp USB-C fast charger, and waterproof electronics on the truck. These are great trucks for people new to R/C, and they are a great way for kids to get involved. This is one of the best beginner trucks we have and they are an unbelievable value. These make an excellent gift!
Traxxas Stampede XL-5
Rock-Crushing Torque—Brutally Tough!
The Stampede name has always been synonymous with off-road fun. New factory-installed Extreme Heavy Duty suspension components make Stampede tougher than ever, and a new clipless body maximizes convenience. With a top speed of 30+ mph* and drive-over-anything ground clearance, Stampede rips through grass and powers over curbs. Pour on the throttle and Stampede raises the front wheels skyward for dirt-roosting wheelies and high-power jumps. Fully waterproof electronics give Stampede an all-access pass to make even the wildest all-weather adventures possible.
Stampede XL-5 Now Includes
Extreme HD Components
Built to be the ultimate off-road monster truck, Stampede now features factory-installed Extreme Heavy Duty suspension components for game-changing durability. Key components have been redesigned and beefed-up with extra material to ensure Stampede takes even the most brutal punishment in stride.
Clipless Body Mounting
Stampede’s clipless body holds firm no matter how rough the action gets. Heavy duty latches grip the body tightly, but release in just seconds for fast battery swaps. This convenient hidden latching system replaces traditional body clips with reinforced panels to maintain body integrity and resist pull-through damage.
Features
- Clipless Monster Truck Body
- Tough LED-ready front and rear bumpers
- Includes wheelie bar
- Body reinforcements to prevent pull-through damage
- Holds tight for intense action
- Quick and easy removal
- Smooth appearance with no body posts or clips
- High-Performance Waterproof XL-5 Electronic Speed Control
- Innovative waterproof design
- Three drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode - 50% forward / brake / 50% reverse (patented)
- Traxxas EZ-Set one-button setup
- LiPo and NiMH compatible with two-stage low-voltage detection
- Titan 550 Motor
- Powerful Titan 12T 550 brushed motor with internal cooling fan
- Oversized armature for big torque and increased power handling
- Virtually maintenance-free operation
- Extreme Heavy Duty Parts Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- HD suspension arms
- TQ 2.4 GHz 2-Channel Radio System
- Ergonomic transmitter with internal antenna
- Traxxas 6519 3-channel micro receiver with fail-safe security
- Sealed watertight receiver box keeps the receiver dry
- Includes Battery and USB-C Charger
- 4-amp USB-C fast charger
- 3000 mAh Traxxas 7-cell 8.4 V NiMH battery with iD
- Easy Access Battery Compartment
- Accepts NiMH 6 and 7-cell flat packs and hump packs
- Accepts 2-cell LiPo batteries
- Transmission and Driveline
- Brushless-ready Magnum 272 metal-gear transmission
- Torque-Control slipper clutch system
- Planetary gear differential with steel ring gear
- Sealed gearbox protects the transmission with beefed up motor guard
- External gear cover with easy clutch access
- Heavy-duty telescoping U-joint driveshafts and yokes
- Tough Fiber-Composite Monocoque Chassis
- Tall 4″ center ground clearance to drive over obstacles
- Steering
- High-torque waterproof Traxxas 2056 steering servo
- Spring-loaded servo saver helps protect against impacts
- Suspension
- Durable solid camber links eliminate the need for adjustment
- Captured rod ends won't pop off
- Springs and Shocks
- Fully adjustable oil-filled Ultra Shocks with X-ring technology
- White powder-coated springs
- Wheels and Tires
- Pre-glued high profile Talon all-terrain tires with performance foam inserts
- 2.8″ All-Star wheels
- Precision Hex Hardware
Modified Muscle
The Titan 12T 550 motor pumps out incredible power with an integrated cooling fan to keep temperatures down. The XL-5 electronic speed control provides smooth, reliable power delivery with EZ-Set one-button setup and three different drive profiles.
Battery and Charger Included
Stampede includes a powerful 8.4 volt 3000 mAh Traxxas Power Cell rechargeable NiMH battery pack to reach its 30+ mph top speed. Fast 4-amp charging is available virtually anywhere thanks to the included 45+ watt USB-C battery charger with iD technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time.
Specifications
Length: 19.7 inches (428 mm)
Front Track: 12.75 inches (324 mm)
Rear Track: 12.75 inches (324 mm)
Weight: 65.3 ounces (1.85 kg)
Height (overall): 9.5 inches (241 mm)
Wheelbase: 10.6 inches (270 mm)
Front Shock Length: Long
Rear Shock Length: XX-long
Front Tires (pre-glued): Talon 2.8″
Rear Tires (pre-glued): Talon 2.8″
Front Wheels: 2.8″ mirror-chrome All-Star
Rear Wheels: 2.8″ mirror-chrome All-Star
Electronic Speed Control: XL-5
Motor (electric): Titan 12T 550
Steering Servo: 2056 high torque waterproof
Transmitter: TQ 2.4 GHz radio
Receiver: 6519 3-channel
Gear Ratio (internal): 2.72 (final drive: 12.34)
Differential Type: Planetary
Gear Pitch: 48-pitch
Transmission: Magnum 272
Steering: Single point
Chassis Type: Modified tub
Chassis Material: Composite Nylon
Top Speed: 30+ mph**
Skill Level: 1
*Battery Tray Dimensions: 164 mm x 46 mm x 26 mm
Included Charger: 4-amp USB-C Fast Charger
Included Batteries: Traxxas 7-cell NiMH battery with iD
*Battery expansion kit available (3725X)
**With 7-cell battery and included optional 21-tooth pinion gear
Requires
(4) AA Batteries for Transmitter
USB-C Charging Cable and Block | This Combo Includes:
Traxxas Stampede 4x4 VXL Truck
EZ-Peak ID LiPo Charger
11.1V 3S 4000mAh LiPo Battery
This is the Traxxas Stampede 4X4 VXL Brushless Ready-to-Run Waterproof Monster Truck Ready-To-Race, with TQi 2.4 GHz 2-channel radio system, TSM, Extreme Heavy Duty Upgrade Kit, VXL-3s speed control, 540XL brushless motor, and clipless painted ProGraphix body.
Battery and charger are sold separately.
Stampede 4X4 VXL - BACK WITH A VENGEANCE
Stampede 4X4 VXL is back--bigger and stronger than ever before! Backed by the massive torque of the Velineon 540XL motor, Stampede muscles its way over the toughest obstacles and reaches speeds of 60 mph and beyond. Stampede 4X4 comes outfitted to shred any terrain with the strength of Traxxas’ Extreme Heavy Duty Upgrade Kit and aggressive grip of its huge 5.3″ Sledgehammer tires. Drive harder, go faster, hang tougher— nothing stops Stampede 4X4 VXL!
Hoss 4X4 VXL is now Stampede 4X4 VXL
540XL TORQUE
For those who believe “there’s no replacement for displacement,” Traxxas has built a monster truck for you. Stampede 4X4 VXL packs the same Velineon 540XL brushless motor found in the Maxx extreme monster truck. It’s the largest motor we’ve ever offered in a truck this size. The Velineon VXL-3s speed control rolls out the power smoothly utilizing large 6.5 mm connectors and an integrated cooling fan for fast, reliable fun.
EXTREME HEAVY DUTY UPGRADE KIT
Along with added power, Stampede 4X4 VXL also gets a massive boost in strength with its factory-installed Extreme Heavy Duty Upgrade Kit. The kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.
EXTREME SLEDGEHAMMER GRIP
Stampede 4X4 VXL relies on huge Sledgehammer tires to put its massive torque to the ground. The 5.3″ tall Sledgehammers lift Stampede skyward for superior ground clearance and a menacing stance. The open-block tread design clears away mud and debris for unrivaled traction on loose surfaces. Sledgehammer tires come pre-glued with performance foam inserts and they’re TSM-rated for speeds of 60 mph and beyond!
Features
- Clipless Body
- Tough reinforced bumpers
- Reinforced inner cage
- Rugged roof rollover protector
- Tailgate protector
- Quick and easy removal
- Holds tight for intense action
- Extreme Heavy Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Maxx duty driveshafts
- Oversize diameter
- 6 mm axles
- Steel wheel hexes
- TQi 2.4 GHz High Output Radio System
- Traxxas Link enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to
- 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Multi-Function knob
- Patented waterproof receiver box with easy-access plug
- VXL-3s Waterproof Electronic Speed Control
- Cooling fan with large heat sink
- Three Programmable Drive Profiles:
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-9 cells (7.2 to 10.8 volts)
- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
- Velineon 540XL Brushless Motor
- Long format brushless motor
- 4-pole 2400 kV
- 5 mm output shaft
- Precision-balanced rotor
- Brilliant blue-anodized finish
- Up to 60+ mph with 3s LiPo battery (sold separately)
- Traxxas Stability Management
- Helps prevents spinouts and loss of control
- Adjusts from off to 100% assistance from the transmitter
- Chassis
- Modular composite tub design
- Secure battery hold-down latch
- Reinforced integrated wheelie bar
- High-approach bumpers
- Integrated nerf bars for side impact resistance
- Suspension
- Adjustable 4 mm steel toe and camber links
- HD suspension arms
- Oil-filled Ultra Shocks
- Rugged front and rear shock towers
- White powder-coated springs
- Steering
- Chassis-mounted 2075 servo
- Dual bellcrank design with integrated servo saver
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Torque-Biasing Center Drive absorbs shocks and distributes power evenly
- Oil-filled steel gear front and rear differentials
- Large 32-pitch steel spur gear
- Anodized-aluminum center driveshaft
- Wheels and Tires
- Large 2.8″ black chrome wheels
- Tall 5.3″ Sledgehammer tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Reinforced Front and Rear Bumpers
Tough reinforced bumpers protect the chassis against impacts. The specially designed front bumper provides a high approach angle that allows Stampede to climb up and over obstacles with ease. The rear bumper mounts a perfectly positioned wheelie bar to help prevent the Stampede 4X4 VXL from back-flipping under its explosive power.
Sledgehammer Tires and 2.8" Black Chrome Wheels
Large 5.3" Sledgehammer tires combine excellent ground clearance with true mud-slinging fun. The open-block tread design claws into gravel, dirt, and grass for sure-footed 4X4 traction on nearly any surface. The heavy-duty rubber compound is specially formulated to resist tearing and bonds exceptionally well to the aggressive black chrome wheels.
Modular Chassis
Stampede 4X4's modular design creates a chassis that's both strong and easy to maintain. The front and rear bulkheads remove easily with just a few screws. In less than a minute using a power screwdriver, you'll have full access for easy service and adjustment.
Heavy-Duty Composite Arms
Molded from our toughest composite material, Stampede 4X4 VXL's heavy-duty suspension arms provide just the right amount of flex to resist breaking—even in cold weather! From skate parks to 10-foot ramps, these heavy-duty arms stand up to even the most punishing drivers for non-stop fun behind the wheel.
Ultra Shocks
Oil-filled Ultra Shocks utilize dual X-ring technology for a perfect seal and silky-smooth performance. The large oil capacity and rugged design soaks up big jumps and off-road abuse for smooth driving performance. They are easy to tune with a wide range of available oils, springs, and pistons.
5-Channel Receiver with Failsafe
The TQi 2.4 GHz radio system stores up to thirty models in memory, allowing you to use one transmitter for your entire RC garage. Integrated telemetry ports in the receiver transmit real-time data to the TQi transmitter when using the Traxxas Link App and telemetry sensors (sold separately). In the event of signal loss, the receiver automatically returns the throttle to neutral and holds the last steering position.
Waterproof Receiver Box
Stampede 4X4 VXL incorporates a waterproof receiver box in the nose of the chassis to save weight and provide a clean, high-tech appearance. The antenna and servo wires route neatly through a patented watertight seal to protect the receiver from water. No matter what the weather, Stampede is ready for action!
Optimum-Geometry Steering with Integrated Servo Saver
A dual-bellcrank design pivots on rubber-sealed ball bearings for smooth action in the harshest conditions. The integrated cam-type servo saver protects the servo gears from crash impacts without sacrificing steering precision.
Digital High-Torque Waterproof Steering Servo
Stampede 4X4 VXL's extreme speed and tall Sledgehammer tires require a steering servo that's both strong and durable. The waterproof 2075 digital high servo provides robust steering authority with ball bearings for precise control and quick reflexes.
VXL-3s ESC with Fan
The waterproof Velineon VXL-3s speed control is packed with technology to deliver maximum power. Large heat sink, integrated on/off switch, and three programmable drive profiles top the feature list. Two-stage low voltage detection allows full LiPo compatibility, including powerful 11.1-volt 3s packs!
Chassis Nerf Bars
Rugged side nerf bars protect the chassis from rocks and other impacts. Special channels in the nerf bars support the sides of the body for a tighter, more secure fit.
Velineon 540XL Motor
A sensorless Velineon 540XL 2400 kV motor delivers extreme performance with nearly zero maintenance. Ultra high-temperature Neodymium magnets, high-speed bearings, and a precision, 4-pole balanced rotor deliver smooth running and long life.
Fixed Gear Adapter
Fixed gear adapters take the guesswork out of setting your gear mesh. The fixed positioning keeps the gear mesh tight, even after the harshest landings. The innovative motor mount keeps the 540XL motor locked firmly in place with just a single screw for easy maintenance.
Heavy-Duty 4 mm Turnbuckles
Stampede 4X4 VXL's 4mm turnbuckles feature broad flat sections make toe and camber adjustments easy with the included wrench. The fully captured rod ends take a beating and won’t pop apart during rigorous off-road pounding.
Maxx-Duty Driveshafts
Stampede 4X4 VXL's Maxx-duty driveshafts with beefed-up U-joints are built to handle brushless power without breaking a sweat. Large 6 mm axles key into the included steel wheel hexes for unmatched strength and durability.
Steel-Gear Differentials
Sealed front and rear differentials utilize steel-gear internals for maximum durability. Silicone gaskets and X-ring seals allow you to tune the amount of locking action by varying the viscosity of the fluid inside the differentials.
Extruded Aluminum Driveshaft
A one-piece extruded aluminum driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies. Altogether, this shaft runs straight and true for ultra-smooth driveline operation.
Heavy-Duty Steel Spur Gear
Designed from the start to handle big brushless horsepower, Stampede 4X4 VXL's driveline uses a rugged steel spur gear with large 0.8 module/32-pitch teeth for reliability no matter how much power you pour on.
Specifications
Scale: 1/10
Length: 20.24 inches (514 mm)
Width: 13.10 inches (333 mm)
Ground Clearance: 2.75 inches (70 mm)
Weight: 6.3 pounds (2.9 kg) without batteries
Height: 8.34 inches (212 mm)
Wheelbase: 11.62 inches (295 mm)
Front Shock Length: Long
Rear Shock Length: XX-long
Tires (pre-glued): 5.3″ (133 mm) tall Sledgehammer
Wheels: 2.8″ (71 mm) black chrome
Speed Control: VXL-3s
Motor (electric): Velineon 540XL brushless
Transmission: Single speed with Torque-Biasing Center Drive
Overall Drive Ratio: 10.99:1
Differentials: Sealed, 2-gear
Chassis: Modular composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Dual bellcrank with integrated servo saver
Radio System: TQi 2.4 GHz 2-ch transmitter with 6533 TSM receiver
Servo: Waterproof 2075
Top Speed (optional gearing): 60+ mph with 3-cell LiPo and 23/50 gearing
Skill Level: 1
Battery Compartment: 162 mm x 47 mm x 26 mm *35 mm with optional battery strap (9026, sold separately)
Requires
(4) AA Batteries for transmitter
| This Combo Includes:
Traxxas Rustler 4x4 VXL Truck
EZ-Peak ID LiPo Charger
11.1V 3S 4000mAh LiPo Battery
This is the Traxxas Rustler 4X4 VXL Brushlessfully-assembled, waterproof electronics, Ready-To-Race, with TQi 2.4 GHz 2-channel radio system, TSM, Extreme Heavy Duty Kit, VXL-3s brushless power system, and clipless painted ProGraphix body.
Rustler 4X4 VXL - The Stadium Truck Redefined
Extreme 4X4 stadium truck speed and excitement now equipped with the Extreme Heavy Duty upgrade kit.Rustler 4X4 VXL is a hard-charging wheelie machine that captures the speed and style of a stadium truck and injects it with a massive dose of strength and power. Beneath Rustler’s clipless body, the extreme Velineon brushless power system feeds power through the factory-installed Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability.
EXTREME HEAVY DUTY UPGRADE KIT
Rustler 4X4 VXL’s factory-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Rustler.
SELF-RIGHTING
Rustler 4X4 VXL uses Traxxas’ patented self-righting feature to keep the fun going, even when you get carried away with the wheelies or land that big trick upside down. Simply press a button on the TQi transmitter and, in most circumstances*, Rustler 4X4 VXL will be back on its wheels in just seconds and ready for more action! *3s power recommended for optimal performance
CLIPLESS BODY MOUNTING
Rustler 4X4 VXL uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. The sleek, aerodynamic body features a rugged internal structure and external rollover protection for long life and Traxxas-Tough durability.
Features
- Clipless ProGraphix Body
- Easy one-handed removal
- Reinforced inner cage
- Strong oversized latch
- Rugged roof rollover protector
- Molded composite plastic wing
- Extreme Heavy Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Maxx duty driveshafts
- Oversize diameter
- 6 mm axles
- Steel wheel hexes
- TQi 2.4 GHz High Output Radio System
- TQi 2-channel transmitter
- 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Compatible with optional TQi Traxxas Link Wireless Module
- (6511) to access full Traxxas Link app functionality (sold separately)
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
- Programmable multi-function knob
- Patented waterproof receiver box
- VXL-3s Waterproof Electronic Speed Control
- Three programmable drive profiles:
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set one-button setup
- Large heat sink
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-9 cells (7.2 to 10.8 volts)
- LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
- Velineon Brushless Motor
- Ultra high-temperature sintered Neodymium magnets
- Low-maintenance design
- Efficient, high-speed ball bearings
- Precision-balanced rotor
- 3500 kV
- Brilliant blue-anodized finish
- Traxxas Stability Management (TSM)
- Improves straight line acceleration and braking on low-traction surfaces
- Maintains steering composure to allow throttle-on powerslides
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- Chassis
- Low-CG design for responsive handling
- Modular composite tub design
- Latching battery hold-down
- Reinforced integrated wheelie bar
- High-approach front bumper to climb curbs
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Oil-filled steel gear front and rear differentials
- Large 32-pitch gearing
- Torque Control heavy-duty slipper clutch with aluminum pads
- Anodized-aluminum center driveshaft
- Steering
- Chassis-mounted 2075 servo
- Dual bellcrank design with integrated servo saver
- Suspension
- Adjustable 4 mm steel toe and camber links
- HD suspension arms
- Oil-filled Ultra Shocks
- Rugged front and rear shock towers
- White powder-coated springs
- Wheels and Tires
- Large 2.8″ black chrome wheels
- Talon EXT tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
Modular Chassis
Rustler 4X4' s modular chassis features front and rear bulkheads that remove easily with just a few screws. In less than a minute using a power screwdriver, you’ll have full access for easy service and adjustment.
Velineon 3500 Motor
A sensorless Velineon 3500 kV motor delivers extreme performance with nearly zero maintenance. Ultra high-temperature Neodymium magnets, high-speed bearings, and a precision, 4-pole balanced rotor deliver smooth running and long life.
VXL-3s
The waterproof Velineon VXL-3s speed control is packed with technology to deliver maximum power. Large heat sink, integrated on/off switch, and three programmable drive profiles top the feature list. Two-stage low voltage detection allows full LiPo compatibility, including powerful 11.1-volt 3s packs!
Waterproof Receiver Box
Rustler's innovative waterproof receiver box allows easy access to the receiver. The antenna and servo wires route neatly through a patented watertight seal to protect the receiver from water. No matter what the weather, Rustler 4X4 is ready for action!
5-Channel Receiver with Failsafe
The TQi 2.4 GHz radio system stores up to thirty models in memory, allowing you to use one transmitter for your entire RC garage. Integrated telemetry ports in the receiver transmit real-time data to the TQi transmitter when using the Traxxas Link App and telemetry sensors (sold separately). In the event of signal loss, the receiver automatically returns the throttle to neutral and holds the last steering position.
Talon EXT 2.8" Tires and Black Chrome Wheels
Rustler's large 2.8" black chrome wheels provide terrain-conquering ground clearance and a commanding presence. Talon EXT tires have a square-shouldered, aggressive tread design to dig into gravel, dirt, and grass for incredible 4X4 traction and huge roost.
Ultra Shock
Oil-filled Ultra Shocks utilize dual X-ring technology for a perfect seal and silky-smooth performance. The large oil capacity and rugged design soaks up big jumps and off-road abuse for smooth driving performance. They are easy to tune with a wide range of available oils, springs, and pistons.
Digital High-Torque Waterproof Steering Servo
Rustler 4X4 VXL's extreme speed and quick reflexes require a steering servo that's both strong and fast. The included digital high-speed, high-torque servo features ball bearings for precise control and quick reflexes.
Heavy-Duty Suspension Arms
Heavy-duty suspension arms are stronger than ever before. Molded from a tough new composite material, the arms stand up to even the most punishing drivers and resist breakage for non-stop fun behind the wheel.
Extruded Aluminum Driveshaft
A one-piece extruded aluminum driveshaft is both strong and lightweight. Internal splines fit directly onto the input shafts of the front and rear drive assemblies. Altogether, this shaft runs straight and true for ultra-smooth driveline operation.
Maxx-Duty Driveshafts
Rustler 4X4’s Maxx-duty driveshafts with beefed-up U-joints are built to handle brushless power without breaking a sweat. Large 6 mm axles key into the included steel wheel hexes for unmatched strength and durability.
Heavy-Duty 4 mm Turnbuckles
Rustler 4X4 uses the same heavy-duty steel 4 mm turnbuckles developed for the Slash 4X4. Broad flat sections make toe and camber adjustments easy with the included wrench. The fully captured rod ends take a beating and won't pop apart during rigorous off-road pounding.
Functional Rear Wing
The functional rear wing reduces drag while still providing valuable downforce for high speed stability. The wing mounts directly to the internal body reinforcements for lasting durability.
Specifications
Length: 18.78 inches (477 mm)
Width: 12.94 inches (329 mm)
Ground Clearance: 1.1 inches (27 mm)
Weight: 5.12 pounds (2.32 kg)
Height: 6.35 inches (161 mm)
Wheelbase: 11.62 inches (295 mm)
Front Shock Length: Long
Rear Shock Length: XX-long
Tires (pre-glued): 4.5″ x 2.3″ (114 mm x 58 mm) Talon EXT
Wheels: 2.8 inches (71 mm) black chrome
Speed Control: VXL-3s
Motor (electric): Velineon 3500 brushless
Transmission: Single speed
Overall Drive Ratio: 13.97:1
Differentials: Sealed, 2-gear
Chassis Structure / Material: Composite tub
Brake Type: Electronic
Drive System: Shaft driven 4WD
Steering: Bellcrank with integrated servo saver
Radio System: TQi 2.4 GHz 2-ch transmitter with 6533 TSM receiver
Servo: Waterproof 2075
Top Speed (optional gearing): 65+ mph with 3-cell LiPo and 20/54 gearing (TRA3950X and TRA3956)
Skill Level: 1
Battery Compartment: 162 mm x 50mm x 25 mm
Requires
(4) AA Batteries for transmitter
| This is the Traxxas Slash 1/16 4x4 Short Course Ready-to-Run RC Truck with TQ 2.4 GHz radio system, Titan 12T 550 motor, XL-2.5 electronic speed control, 7.2 volt NiMH iD battery, 2-amp USB-C fast charger, and ProGraphix race replica painted body.
Slash 4X4 Performance in 1/16 Scale
The Traxxas Slash 4X4 set the standard for short-course fun and versatility with speed, power, and track-ready handling. Now you can experience the fun of wheel-to-wheel Slash 4X4 racing in 1/16 scale Titan 550 power. At 14 inches long, the 1/16 Slash 4X4 is about half the size of the 1/10-scale Slash 4X4, but don't call it a "mini". This is a whole new category of RC performance and fun that no mere mini-model can match. Beneath the tough Race Replica polycarbonate shell, you'll find sophisticated suspension technology and chassis design with the quality and durability you expect from Traxxas.
Battery and Charger Included!
1/16 Slash includes a powerful 7.2 volt 1200 mAh Traxxas Power Cell rechargeable NiMH battery pack to reach its 30+ mph top speed. Fast 2-amp charging is available virtually anywhere thanks to the included USB-C battery charger with iD technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time.
Modified Muscle
Leave it to Traxxas to put the huge torque of the Titan 550 motor into the 1/16 Slash for incredible acceleration and monster power. The Titan 12T motor delivers exciting performance with long-lasting performance. An integrated cooling fan pulls cool air through vent tunnels molded into the motor plate to keep temperatures down. The XL-2.5 electronic speed control comes standard with three drive profiles, low voltage detection, thermal shutdown protection, gold-plated connectors, and incredibly low resistance.
Features
- Race Replica ProGraphix Painted Body
- 1/16 Scale pre-painted body with applied decals
- Scale dimensions and looks of actual short course race trucks
- Scale front and rear tube-style bumpers
- Waterproof XL-2.5 Electronic Speed Control
- Innovative waterproof design
- Three drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode - 50% forward / brake / 50% reverse (patented)
- Traxxas EZ-Set one-button setup
- High-capacity heat sink
- LiPo and NiMH compatible with two-stage low-voltage detection
- Titan 550 Motor
- Powerful Titan 12T 550 modified motor with internal cooling fan
- Oversized armature for big torque and increased power handling
- Virtually maintenance-free operation
- TQ 2.4 GHz 2-Channel Radio System
- Ergonomic transmitter with internal antenna
- Traxxas 6519 3-channel micro receiver with fail-safe security
- Patented O-ring sealed watertight receiver box keeps the micro receiver dry
- Includes Battery and USB-C Charger
- 2-amp USB-C fast charger
- 1200 mAh Traxxas 6-cell 7.2 V NiMH battery with iD
- Fiber-Composite Monocoque Chassis
- Low-CG design for improved handling
- Tough skid plates for driveline protection
- All electronics securely fastened to chassis
- Dual Integrated Battery Compartments
- Quick-release battery doors for fast pack changes
- Intake and exhaust cooling vents keep battery temperatures down
- Accepts 1/16 scale NiMH and LiPo batteries
- Transmission and Driveline
- Full-time shaft-driven 4WD
- Sealed heavy-duty transmission
- Adjustable slipper clutch
- Sealed, silicone-filled differentials with steel gears
- Heavy-duty telescoping U-joint driveshafts
- Steering
- Digital waterproof Traxxas 2080 steering servo
- Servo horn with integrated servo saver
- Suspension
- Twin-arm pivot ball suspension
- Progressive rocker-arm damping for extreme travel
- Captured rod ends won't pop off
- Springs and Shocks
- Inboard fully adjustable oil-filled GTR shocks
- Adjustable pre-load collars
- Red powder-coated springs
- Wheels and Tires
- Pre-glued all-terrain tires with high-performance foam inserts
- Satin chrome 5-spoke beadlock style wheels
- Rubber-Sealed Ball Bearings
- Precision Hex Hardware
- Unparalleled Traxxas support parts availability
Revo-Spec Suspension
The unique Revo-spec suspension geometry multiplies the suspension travel to lengths normally found on larger models. It provides true progressive rate performance that's light over the small bumps and instantly tightens when compressed to resist bottoming out over large jumps.
3-channel Micro Receiver with Fail-Safe Security
The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED indicates power-on and bind status for fool-proof control and convenience. In the event of signal loss, the receiver will automatically return the throttle to neutral and hold the last commanded steering position. The fail safe programming is conveniently built-in and does not need to be set or activated.
Waterproof Electronics
Mud. Water. Snow. 1/16 Slash 4X4's waterproof electronics and fully sealed receiver box let you make tracks in conditions that leave other trucks parked at home. The antenna and servo wires route neatly through a special watertight seal. To protect the receiver from dust and water a custom shaped blue O-ring seals the receiver box.
Oil-Filled GTR Shocks
1/16 Slash 4X4 's super-smooth oil-filled shocks damp the suspension and maintain control no matter how rugged the terrain. They are fully tuneable and include pressure bladders for air/oil separation and threaded spring pre-load collars for quick ride height adjustments.
Ball-Bearing Transmission With Torque Control Slipper Clutch
1/16 Slash 4X4's high-efficiency, heavy-duty transmission is built for brushless power when you're ready to Power Up. An adjustable slipper clutch lets you tailor power delivery to suit the terrain and your driving style, and turns every watt of Titan power into pure performance.
Full-Time 4WD With Sealed, Silicone-Filled Differentials
Sealed, silicone-filled differentials resist "unloading" for superior performance and authentic handling as you drift the 1/16 Slash 4X4 through corners with precision and control. The viscosity of the differential fluid has been carefully tuned for exciting on-road performance, and the shaft-driven 4WD system delivers instant acceleration with proven efficiency and durability.
Digital High-Torque Waterproof Steering Servo
Small but powerful, the 1/16 Slash 4X4's 2080 servo cranks out 41.7 oz.-in. of tire-turning torque with digital circuitry for responsive control—even in water, mud and snow, thanks to its o-ring-sealed waterproof construction.
All-Terrain Tires & Wheels
Each corner of the 1/16 Slash 4X4 comes wrapped in all-terrain tires, pre-glued and mounted onto beadlock-style wheels. The tires deliver the perfect balance of forward traction and side bite on asphalt, dirt, and any other surface you throw at them. 12 mm mounting hexes open the door to additional wheel and tire combos to tune traction for specific surfaces.
Dual Battery Compartments
The 1/16 Slash 4X4 unleashes its full speed potential with the included Power Cell battery pack, but for extended run time and more "punch," the chassis' dual battery compartments let you add a second NiMH battery pack and parallel connector (both sold separately) to double the available battery capacity.
Specifications
Length: 14 inches (356 mm)
Front Track: 7.3 inches (185 mm)
Rear Track: 7.3 inches (185 mm)
Weight: 35 ounces (1000 g)
Height (overall): 4.92 inches (125 mm)
Wheelbase: 8.1 inches (206 mm)
Front Shock Length: 48 mm
Rear Shock Length: 48 mm
Front Tires (pre-glued): All-terrain 1.6″
Rear Tires (pre-glued): All-terrain 1.6″
Front Wheels: Dual-bead 35/47 mm, 12 mm hex hub
Rear Wheels: Dual-bead 35/47 mm, 12 mm hex hub
Electronic Speed Control: Waterproof XL-2.5
Motor (electric): Titan 12T
Transmission: Heavy-duty with steel idler gear
Gear Ratio (internal): 5.04:1, (reversed input: 9.72:1)
Overall Drive Ratio: 7.32:1 (stock, out-of-box)
Differential Type: Hardened steel bevel, sealed
Gear Pitch: 48 pitch
Chassis Structure/Material: Molded composite Nylon monocoque
Brake Type: Electronic
Drive System: Shaft-driven 4WD
Steering: Bellcrank
Radio System: Traxxas TQ 2.4 GHz (2-Channel)
Skill Level: 1
Requires
(4) AA Batteries for Transmitter
USB-C Charging Cable and Block |
Rating & Review
There are no reviews yet.